Wep encryption couses problems.

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message




Joined: 01 Jan 1970
Posts:

PostPosted: Tue Jul 31, 2012 5:00    Post subject: Wep encryption couses problems. Reply with quote
So i got the same loco m2 loaded with latest ddwr, and notice that client mode and repeater mode dont work if wep encryption is used
Please SASH dont tell me to use wpa or better im trying that whoever fixes the bugs on ddwrt if maybe this bug can be fixed as its been here for a while, client and repeater mode work nice with wpa and better. but if using wep, then i dont get a wan ip therefore no internet service.
heres the dmesg:
Code:
<5>[    0.000000] Linux version 3.3.8-svn19342 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #407 Fri Jun 8 06:17:43 CEST 2012
<4>[    0.000000] flash_size passed from bootloader = 0
<6>[    0.000000] bootconsole [early0] enabled
<6>[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
<6>[    0.000000] Determined physical RAM map:
<6>[    0.000000]  memory: 02000000 @ 00000000 (usable)
<4>[    0.000000] Zone PFN ranges:
<4>[    0.000000]   Normal   0x00000000 -> 0x00002000
<4>[    0.000000] Movable zone start PFN for each node
<4>[    0.000000] Early memory PFN ranges
<4>[    0.000000]     0: 0x00000000 -> 0x00002000
<7>[    0.000000] On node 0 totalpages: 8192
<7>[    0.000000] free_area_init_node: node 0, pgdat 80301780, node_mem_map 81000000
<7>[    0.000000]   Normal zone: 64 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
<5>[    0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[    0.000000] Writing ErrCtl register=00000000
<6>[    0.000000] Readback ErrCtl register=00000000
<6>[    0.000000] Memory: 28924k/32768k available (2411k kernel code, 3844k reserved, 660k data, 172k init, 0k highmem)
<6>[    0.000000] NR_IRQS:80
<6>[    0.000000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
<6>[    0.070000] pid_max: default: 32768 minimum: 301
<6>[    0.070000] Mount-cache hash table entries: 512
<6>[    0.080000] NET: Registered protocol family 16
<6>[    0.110000] found calibration data for slot 0 on 0xBF7F1000
<4>[    0.320000] registering PCI controller with io_map_base unset
<6>[    0.340000] bio: create slab  at 0
<5>[    0.350000] SCSI subsystem initialized
<6>[    0.350000] usbcore: registered new interface driver usbfs
<6>[    0.360000] usbcore: registered new interface driver hub
<6>[    0.360000] usbcore: registered new device driver usb
<6>[    0.370000] PCI host bridge to bus 0000:00
<6>[    0.370000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
<6>[    0.380000] pci_bus 0000:00: root bus resource [io  0x0000]
<7>[    0.380000] pci 0000:00:00.0: [168c:ff1c] type 0 class 0x000200
<6>[    0.380000] pci 0000:00:00.0: fixup device configuration
<0>[    0.390000] bootstrap returns device 168C:2E
<7>[    0.390000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
<7>[    0.390000] pci 0000:00:00.0: supports D1
<7>[    0.390000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
<6>[    0.390000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
<6>[    0.400000] PCI: mapping irq 72 to pin1@0000:00:00.0
<6>[    0.400000] Switching to clocksource MIPS
<6>[    0.410000] NET: Registered protocol family 2
<6>[    0.410000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.420000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[    0.430000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[    0.430000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[    0.440000] TCP reno registered
<6>[    0.440000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.450000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.460000] NET: Registered protocol family 1
<7>[    0.460000] PCI: CLS 0 bytes, default 32
<5>[    0.460000] gpio_proc: module loaded and /proc/gpio/ created
<6>[    0.470000] gpiochip_add: registered GPIOs 0 to 47 on device: ar71xx
<5>[    0.470000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<6>[    0.480000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[    0.490000] msgmni has been set to 56
<6>[    0.490000] io scheduler noop registered
<6>[    0.500000] io scheduler deadline registered (default)
<6>[    0.500000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    0.530000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
<6>[    0.530000] console [ttyS0] enabled, bootconsole disabled
<0>[    0.550000] guessed flashsize = 8M
<0>[    0.550000] scanning for root partition
<0>[    0.560000] uboot detected
<0>[    0.560000] guessed bootloader size = 50000
<0>[    0.570000]
<0>[    0.570000] found squashfs at 164000
<5>[    0.570000] Creating 8 MTD partitions on "ar7240-nor0":
<5>[    0.580000] 0x000000000000-0x000000050000 : "RedBoot"
<5>[    0.590000] 0x000000050000-0x0000007e0000 : "linux"
<5>[    0.590000] 0x000000164000-0x000000780000 : "rootfs"
<4>[    0.600000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[    0.610000] mtd: partition "rootfs" set to be root filesystem
<5>[    0.620000] 0x000000780000-0x0000007e0000 : "ddwrt"
<5>[    0.620000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[    0.630000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[    0.640000] 0x000000000000-0x000000800000 : "fullflash"
<5>[    0.640000] 0x000000000000-0x000000050000 : "fullboot"
<6>[    0.650000] tun: Universal TUN/TAP device driver, 1.6
<6>[    0.660000] tun: (C) 1999-2004 Max Krasnyansky
<6>[    1.060000] PPP generic driver version 2.4.2
<6>[    1.070000] PPP BSD Compression module registered
<6>[    1.070000] PPP Deflate Compression module registered
<6>[    1.080000] PPP MPPE Compression module registered
<6>[    1.080000] NET: Registered protocol family 24
<6>[    1.090000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>[    1.090000] drivers/usb/host/ohci-ar7240.c: starting AR7240 OHCI USB Controller...
<4>[    1.100000] ar7240_start_hc val 8 , reg:8
<6>[    1.100000] ar7240-ohci ar7240-ohci.0: Atheros AR7240 built-in OHCI controller
<6>[    1.110000] ar7240-ohci ar7240-ohci.0: new USB bus registered, assigned bus number 1
<6>[    1.120000] ar7240-ohci ar7240-ohci.0: irq 3, io mem 0x1b000000
<0>[    1.180000] switch USB LED Off
<6>[    1.180000] hub 1-0:1.0: USB hub found
<6>[    1.190000] hub 1-0:1.0: 1 port detected
<6>[    1.190000] Initializing USB Mass Storage driver...
<6>[    1.200000] usbcore: registered new interface driver usb-storage
<6>[    1.200000] USB Mass Storage support registered.
<6>[    1.210000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
<7>[    1.220000] Registered led device: generic_0
<7>[    1.220000] Registered led device: generic_1
<7>[    1.220000] Registered led device: generic_2
<7>[    1.220000] Registered led device: generic_3
<7>[    1.220000] Registered led device: generic_4
<7>[    1.220000] Registered led device: generic_5
<7>[    1.220000] Registered led device: generic_6
<7>[    1.220000] Registered led device: generic_7
<7>[    1.220000] Registered led device: generic_8
<7>[    1.220000] Registered led device: generic_9
<7>[    1.220000] Registered led device: generic_10
<7>[    1.220000] Registered led device: generic_11
<7>[    1.220000] Registered led device: generic_12
<7>[    1.220000] Registered led device: generic_13
<7>[    1.220000] Registered led device: generic_14
<7>[    1.220000] Registered led device: generic_15
<7>[    1.220000] Registered led device: generic_16
<7>[    1.220000] Registered led device: generic_17
<7>[    1.230000] Registered led device: generic_18
<7>[    1.230000] Registered led device: generic_19
<7>[    1.230000] Registered led device: generic_20
<7>[    1.230000] Registered led device: generic_21
<7>[    1.230000] Registered led device: generic_22
<7>[    1.230000] Registered led device: generic_23
<7>[    1.230000] Registered led device: generic_24
<7>[    1.230000] Registered led device: generic_25
<7>[    1.230000] Registered led device: generic_26
<7>[    1.230000] Registered led device: generic_27
<7>[    1.230000] Registered led device: generic_28
<7>[    1.230000] Registered led device: generic_29
<7>[    1.230000] Registered led device: generic_30
<7>[    1.230000] Registered led device: generic_31
<7>[    1.230000] Registered led device: wireless_generic_0
<7>[    1.230000] Registered led device: wireless_generic_1
<7>[    1.230000] Registered led device: wireless_generic_2
<7>[    1.230000] Registered led device: wireless_generic_3
<7>[    1.230000] Registered led device: wireless_generic_4
<7>[    1.230000] Registered led device: wireless_generic_5
<7>[    1.230000] Registered led device: wireless_generic_6
<7>[    1.230000] Registered led device: wireless_generic_7
<7>[    1.230000] Registered led device: wireless_generic_8
<7>[    1.230000] Registered led device: wireless_generic_9
<7>[    1.230000] Registered led device: wireless_generic_10
<7>[    1.230000] Registered led device: wireless_generic_11
<7>[    1.230000] Registered led device: wireless_generic_12
<7>[    1.230000] Registered led device: wireless_generic_13
<7>[    1.230000] Registered led device: wireless_generic_14
<7>[    1.240000] Registered led device: wireless_generic_15
<6>[    1.240000] u32 classifier
<6>[    1.240000]     input device check on
<6>[    1.240000]     Actions configured
<6>[    1.250000] Netfilter messages via NETLINK v0.30.
<6>[    1.250000] nf_conntrack version 0.5.0 (451 buckets, 1804 max)
<4>[    1.260000] nf_conntrack_rtsp v0.6.21 loading
<4>[    1.260000] nf_nat_rtsp v0.6.21 loading
<6>[    1.270000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.270000] IPP2P v0.8.2 loading
<6>[    1.270000] TCP westwood registered
<6>[    1.280000] TCP hybla registered
<6>[    1.280000] TCP vegas registered
<6>[    1.280000] NET: Registered protocol family 17
<5>[    1.290000] Bridge firewalling registered
<6>[    1.290000] 8021q: 802.1Q VLAN Support v1.8
<6>[    1.300000] searching for nvram
<6>[    1.300000] nvram size = 0
<6>[    1.340000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[    1.350000] Freeing unused kernel memory: 172k freed
<6>[    4.670000] ag71xx_mdio: probed
<6>[    4.670000] eth0: Atheros AG71xx at 0xb9000000, irq 4
<6>[    5.270000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
<6>[    5.280000] eth1: Atheros AG71xx at 0xba000000, irq 5
<6>[    5.870000] eth1: Found an AR7240/AR9330 built-in switch
<6>[    9.770000] Compat-wireless backport release: compat-wireless-2012-04-13-1-r31296
<6>[    9.780000] Backport based on wireless-testing.git master-2012-04-13
<6>[   10.180000] cfg80211: Calling CRDA to update world regulatory domain
<6>[   10.250000] cfg80211: World regulatory domain updated:
<6>[   10.260000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   10.270000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   10.290000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.300000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[   10.710000] ath: EEPROM regdomain: 0x0
<7>[   10.710000] ath: EEPROM indicates default country code should be used
<7>[   10.710000] ath: doing EEPROM country->regdmn map search
<7>[   10.710000] ath: country maps to regdmn code: 0x3a
<7>[   10.710000] ath: Country alpha2 being used: US
<7>[   10.710000] ath: Regpair used: 0x3a
<7>[   10.720000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<7>[   10.720000] Registered led device: ath9k-phy0
<6>[   10.720000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=72
<6>[   10.730000] cfg80211: Calling CRDA for country: US
<6>[   10.850000] cfg80211: Regulatory domain changed to country: US
<6>[   10.850000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   10.860000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[   10.870000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[   10.880000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.890000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.890000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.900000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[   11.370000] eth0: link up (100Mbps/Full duplex)
<6>[   13.490000] eth0: link down
<6>[   13.540000] device eth0 entered promiscuous mode
<6>[   16.060000] device eth1 entered promiscuous mode
<6>[   16.150000] cfg80211: Calling CRDA to update world regulatory domain
<6>[   16.180000] cfg80211: World regulatory domain updated:
<6>[   16.190000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   16.190000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   16.200000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   16.210000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   16.220000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   16.220000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   16.230000] cfg80211: Calling CRDA for country: US
<6>[   16.250000] cfg80211: Regulatory domain changed to country: US
<6>[   16.260000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   16.270000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[   16.280000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[   16.280000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   16.290000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   16.300000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   16.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[   16.750000] eth0: link up (100Mbps/Full duplex)
<6>[   16.750000] br0: port 1(eth0) entered forwarding state
<6>[   16.760000] br0: port 1(eth0) entered forwarding state
<7>[   22.770000] ath0: authenticate with c4:17:fe:2a:84:65
<7>[   22.780000] ath0: send auth to c4:17:fe:2a:84:65 (try 1/3)
<7>[   22.780000] ath0: authenticated
<7>[   22.800000] ath0: associate with c4:17:fe:2a:84:65 (try 1/3)
<7>[   22.800000] ath0: RX AssocResp from c4:17:fe:2a:84:65 (capab=0x411 status=0 aid=2)
<7>[   22.800000] ath0: associated
<6>[   31.800000] br0: port 1(eth0) entered forwarding state
Sponsor




Joined: 01 Jan 1970
Posts:

PostPosted: Tue Jul 31, 2012 5:32    Post subject: Reply with quote
seems this is a problem on all atheros builds, thing is why it has not looked seriusly?

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=676823&highlight=#676823
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17473
Location: Hesse/Germany

PostPosted: Fri Sep 21, 2012 8:42    Post subject: Reply with quote
maybe this fixes it

http://svn.dd-wrt.com/changeset/20000

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
H0u5t011
DD-WRT Novice


Joined: 19 Oct 2012
Posts: 3

PostPosted: Fri Oct 19, 2012 20:18    Post subject: Reply with quote
SAME PROBLEM, WEP DONT WORKS!!!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum