06-08-12-r19342 fail to upgrade in wnr2000v3

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
christianrodher
DD-WRT Novice


Joined: 25 Mar 2012
Posts: 12

PostPosted: Sat Jul 07, 2012 22:32    Post subject: 06-08-12-r19342 fail to upgrade in wnr2000v3 Reply with quote
I'm using 18777. But the new version fails to upgrade. Anyone got it to work?
wnr2000v3-factory_NA Upgrade failed
wnr2000v3-webflash.bin Upgrade failed.
Sponsor
cl-i
DD-WRT Novice


Joined: 06 Jul 2012
Posts: 24
Location: Germany

PostPosted: Mon Jul 23, 2012 12:40    Post subject: Re: 06-08-12-r19342 fail to upgrade in wnr2000v3 Reply with quote
christianrodher wrote:
I'm using 18777. But the new version fails to upgrade. Anyone got it to work?
wnr2000v3-factory_NA Upgrade failed
wnr2000v3-webflash.bin Upgrade failed.


Welcome to Club "WNR2000v3".

It seems nobody can install the last 3 versions.

So 18777 is the last chance, or going back to NETGEAR firmware, what I did.

Mainly because the transmissions where very low, and even an old DIR-300 had better signal in a distance of 10 meters and one floor up.

By the way, the Netgear stock firmware was not even better.
mellowninja
DD-WRT Novice


Joined: 28 Mar 2011
Posts: 3

PostPosted: Mon Oct 15, 2012 21:34    Post subject: How do I go back to stock with WNR2000v3? Reply with quote
I'm using the March 19, 2012 build. Also on a mac, and I can't figure out how to revert back to stock. Any help would be much appreciated.
navid
DD-WRT Novice


Joined: 18 Oct 2012
Posts: 1

PostPosted: Thu Oct 18, 2012 4:30    Post subject: Reply with quote
UPNP doesn't work in current version I have: 2012-03-19

http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/netgear-wnr2000v3/wnr2000v3-webflash.bin


I need to upgrade in order to test UPNP functionality.

I have the same problem as many oether people and pretty much cannot use anything after 2012-03-19:

I use http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/06-06-12-r19327/netgear-wnr2000v3/wnr2000v3-factory_NA.img

boot the router while holding reset pin for 30 seconds.

tftp 192.168.1.1
binary
put wnr2000v3-factory_NA.img

router reboots after 2 minutes

I go to web console: http://192.168.1.1 and set the username and password

I login via telnet:
telnet 192.168.1.1
root is username and put your password

nvram erase
cd /tmp/

wget http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/06-06-12-r19327/netgear-wnr2000v3/wnr2000v3-webflash.bin

## or download offline and transfer via your own www server ...

write wnr2000v3-webflash.bin linux

function stop_sshd not found
function stop_snmp not found
function stop_pppoeserver not found
function stop_olsrd not found
function stop_openvpn not found
function stop_openvpnserver not found
function stop_pptpd not found
function stop_freeradius not found
Image too big for partition: linux


cat /proc/mtd
dev: size erasesize name
mtd0: 00050000 00010000 "RedBoot"
mtd1: 00390000 00010000 "linux"
mtd2: 00250000 00010000 "rootfs"
mtd3: 00040000 00010000 "ddwrt"
mtd4: 00010000 00010000 "nvram"
mtd5: 00010000 00010000 "board_config"
mtd6: 00400000 00010000 "fullflash"
mtd7: 00050000 00010000 "fullboot"



Please kindly let me know if we can reduce the size of the new images for Netgear WNR200v3.

Thank you,
Navid
taz_scsul
DD-WRT Novice


Joined: 17 Oct 2012
Posts: 5

PostPosted: Fri Oct 19, 2012 12:30    Post subject: WNR200v3 Flashing green Reply with quote
Guys,

I have the same problem... My WNR200v3 is flashing the green led...

After many hours, i tried to conecting by directly serial cable but in the putty software i just saw a continuous lot of stranger characters and I cannot stop this and I cant send any command...

PLEASE I NEED HELP URGENT !!!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum