IIS 7 FTP Server w/FTPES (SSL) through dd-wrt v24 SP1

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
the block
DD-WRT Novice


Joined: 06 Feb 2008
Posts: 17

PostPosted: Tue Aug 10, 2010 0:51    Post subject: IIS 7 FTP Server w/FTPES (SSL) through dd-wrt v24 SP1 Reply with quote
I am trying to get my FTP server going. It is running on IIS 7, and I am trying to get both regular FTP and secure FTPES working over the internet. So far I have been successful getting regular FTP to work. I am using FileZilla 3.3.3 to test, and the internal IP of my FTP server is 192.168.1.14.

My settings are as follows:
host: myaccount.dyndns.org
server type: FTPES - FTP over explicit TLS/SSL
transfer mode: Active

And my results are as follows:
Status: Resolving address of myaccount.dyndns.org
Status: Connecting to EXT.EXT.EXT.EXT:21...
Status: Connection established, waiting for welcome message...
Response: 220 Microsoft FTP Service
Command: AUTH TLS
Response: 234 AUTH command ok. Expecting TLS Negotiation.
Status: Initializing TLS...
Status: Verifying certificate...
Command: USER username
Status: TLS/SSL connection established.
Response: 331 Password required for username.
Command: PASS *********
Response: 230 User logged in.
Command: SYST
Response: 215 Windows_NT
Command: FEAT
Response: 211-Extended features supported:
Response: LANG EN*
Response: UTF8
Response: AUTH TLS;TLS-C;SSL;TLS-P;
Response: PBSZ
Response: PROT C;P;
Response: CCC
Response: HOST
Response: SIZE
Response: MDTM
Response: REST STREAM
Response: 211 END
Command: OPTS UTF8 ON
Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON.
Command: PBSZ 0
Response: 200 PBSZ command successful.
Command: PROT P
Response: 200 PROT command successful.
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is current directory.
Command: TYPE I
Response: 200 Type set to I.
Command: PORT 192,168,1,10,204,86
Response: 501 Server cannot accept argument.
Command: PASV
Response: 227 Entering Passive Mode (192,168,1,14,198,173).
Status: Server sent passive reply with unroutable address. Using server address instead.
Command: LIST
Response: 150 Opening BINARY mode data connection.
Error: GnuTLS error -53: Error in the push function.
Error: Connection timed out
Error: Failed to retrieve directory listing

Now, if I use the same exact settings, except for the host, I use the internal IP of the FTP Server 192.168.1.14 instead of the myaccount.dyndns.org address, it connects fine, with the following results:
Status: Connecting to 192.168.1.14:21...
Status: Connection established, waiting for welcome message...
Response: 220 Microsoft FTP Service
Command: AUTH TLS
Response: 234 AUTH command ok. Expecting TLS Negotiation.
Status: Initializing TLS...
Status: Verifying certificate...
Command: USER username
Status: TLS/SSL connection established.
Response: 331 Password required for username.
Command: PASS *********
Response: 230 User logged in.
Command: SYST
Response: 215 Windows_NT
Command: FEAT
Response: 211-Extended features supported:
Response: LANG EN*
Response: UTF8
Response: AUTH TLS;TLS-C;SSL;TLS-P;
Response: PBSZ
Response: PROT C;P;
Response: CCC
Response: HOST
Response: SIZE
Response: MDTM
Response: REST STREAM
Response: 211 END
Command: OPTS UTF8 ON
Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON.
Command: PBSZ 0
Response: 200 PBSZ command successful.
Command: PROT P
Response: 200 PROT command successful.
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is current directory.
Command: TYPE I
Response: 200 Type set to I.
Command: PORT 192,168,1,10,204,155
Response: 200 PORT command successful.
Command: LIST
Response: 150 Opening BINARY mode data connection.
Response: 226 Transfer complete.
Status: Directory listing successful

Why is this???

Regular FTP works fine both ways. I've tried completely turning off the Windows Firewall and nothing changes, so I'm assuming I have everything configured properly in the Windows Firewall, and the next level would be my dd-wrt router.

Any suggestions or pointers in the right direction would be much appreciated.. thanks
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum