Posted: Sat Jan 09, 2016 10:42 Post subject: I screwed up wan mac address Actiontec MI424WR
Was using this guide to flash DD-WRT on the router and I got to the part to enter the mac address for the wan and lan and rebooted to find that the WAN was entered wrong. I can connect to it just fine and telnet into it but how can I change the mac address for the wan?
Ok well the router works now cause I didn't read the entire guide. But the mac address is still wrong but it doesn't seem to matter. I found a command to change the mac address but still screwed it up.
Code:
nvram set eth0macaddr=xx:xx:xx:xx:xx:xx
nvram commit
Thing is I don't know which command is for which port.
"As the LAN & WAN ports assignments are reversed on Rev D you need to Log into DD-WRT. Go to Setup, submenu Networking, Port setup, and change the Wan port assignment to ixp1 for your wan connection to function"