I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so it will flash on a TL-WR810N v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR841ND v11.
Disclaimer: I haven't tested the attached builds myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.
Note: You must be logged in to be able to download the attachment. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Last edited by KrypteX on Tue Sep 20, 2016 10:37; edited 1 time in total
My TL-WR810N works well after flashed with the US build above.
Is there a way for me to flash it back to the original factory build or to other builds, like OpenWRT?
TIA
KrypteX wrote:
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so that it will flash on a TL-WR810N v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR841ND v11.
Disclaimer: I haven't tested the attached builds myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.
Note: You must be logged in to be able to download the attachment.
My TL-WR810N works well after flashed with the US build above.
Is there a way for me to flash it back to the original factory build or to other builds, like OpenWRT?
If it works well, why do you want to do that ? Do you really want to brick it ? And OpenWrt itself is dead, if you haven't noticed... _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so that it will flash on a TL-WR810N v1 running stock TP-Link firmware.
Finally got mine today. But the model is TL-WR810(EU) v1.1. and not v.1?! Should the image still work?
KrypteX wrote:
And OpenWrt itself is dead, if you haven't noticed...
In what way is OpenWrt dead? I was looking at their build for the WR810N as well and it looks like it's still maintained.
Posted: Mon Jun 13, 2016 18:08 Post subject: TL-WR810N missing OpenVPN?
I just flashed the firmware from factory using the above link. I am trying to get it setup and I am missing the OpenVPN settings menu. I have tried upgrading to the TL-WR841ND v11 29837 build and the same results. Is OpenVPN not supported on this device?
Posted: Wed Jun 15, 2016 3:07 Post subject: Re: TL-WR810N missing OpenVPN?
LostInIgnorance wrote:
I just flashed the firmware from factory using the above link. I am trying to get it setup and I am missing the OpenVPN settings menu. I have tried upgrading to the TL-WR841ND v11 29837 build and the same results. Is OpenVPN not supported on this device?