polhallen
DD-WRT Novice
Joined: 19 Nov 2015
Posts: 31
|
 Posted: Tue Jul 12, 2016 21:48 Post subject: [tp-link tl-wr1043nd] - usb core support (possible bug?) |
 |
Hi all
with latest dd-wrt release 07-01-2016-r30082, I correctly setted usb core support.
But: after boot I don't see any usb drive (no sda1 in /dev/).
In dmesg I see:
[...]
<6>[ 6.600000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 6.610000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 6.620000] usb usb2: Product: EHCI Host Controller
<6>[ 6.620000] usb usb2: Manufacturer: Linux 3.18.36 ehci_hcd
<6>[ 6.630000] usb usb2: SerialNumber: ehci-platform.1
<6>[ 6.650000] hub 2-0:1.0: USB hub found
<6>[ 6.660000] hub 2-0:1.0: 1 port detected
<6>[ 6.860000] usb 1-1: new high-speed USB device number 2 using ehci-platform
<5>[ 7.010000] SCSI subsystem initialized
<3>[ 7.100000] usb 1-1: device descriptor read/64, error -71
<6>[ 7.290000] usbcore: registered new interface driver usb-storage
<3>[ 7.480000] usb 1-1: device descriptor read/64, error -71
<6>[ 7.710000] usb 1-1: new high-speed USB device number 3 using ehci-platform
<3>[ 7.870000] usb 1-1: device descriptor read/64, error -71
<3>[ 8.140000] usb 1-1: device descriptor read/64, error -71
<6>[ 8.370000] usb 1-1: new high-speed USB device number 4 using ehci-platform
[...]
if from webgui I restart usb core support, everything works (like dmesg below)
Is it a bug? thanks!
PLEASE: what's the correct way to restart "usb-core-support" from shell?
Cheers!
<6>[ 277.360000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 277.370000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 277.370000] usb usb2: Product: EHCI Host Controller
<6>[ 277.380000] usb usb2: Manufacturer: Linux 3.18.36 ehci_hcd
<6>[ 277.380000] usb usb2: SerialNumber: ehci-platform.1
<6>[ 277.400000] hub 2-0:1.0: USB hub found
<6>[ 277.400000] hub 2-0:1.0: 1 port detected
<6>[ 277.670000] usb 1-1: new high-speed USB device number 2 using ehci-platform
<6>[ 277.820000] usb 1-1: New USB device found, idVendor=0951, idProduct=168a
<6>[ 277.830000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 277.830000] usb 1-1: Product: DT Micro
<6>[ 277.840000] usb 1-1: Manufacturer: Kingston
<6>[ 277.840000] usb 1-1: SerialNumber: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
<5>[ 278.020000] SCSI subsystem initialized
<6>[ 278.120000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[ 278.120000] scsi host0: usb-storage 1-1:1.0
<6>[ 278.130000] usbcore: registered new interface driver usb-storage
<5>[ 279.190000] scsi 0:0:0:0: Direct-Access Kingston DT Micro 1.00 PQ: 0 ANSI: 4
<5>[ 279.200000] sd 0:0:0:0: [sda] 60437492 512-byte logical blocks: (30.9 GB/28.8 GiB)
<5>[ 279.210000] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 279.220000] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
<5>[ 279.220000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 279.230000] sda: sda1
<5>[ 279.240000] sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>[ 279.960000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
|
