The Pendo Buddybox vn32 3g router

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Author Message
vornez
DD-WRT Novice


Joined: 04 Jun 2016
Posts: 2

PostPosted: Sun Jul 17, 2016 12:30    Post subject: The Pendo Buddybox vn32 3g router Reply with quote
The Pendo Buddybox vn32 3g router

A 3g router available in australia, mostly used by customers of the dodo internet
provider. There isn't a dd-wrt firmware mod available for this router.

This router contains
- a 4 port ethernet hub
- wifi sharer with internal antenna,
- a 3g sim card slot for operation of a mobile broadband service,
(GSM/3G/4G SIM card on the GSM 900/1800Mhz network.)
- an external antenna socket with standard antenna for 3g signal
- a usb socket for connection of a 3g usb modem
- a PSTN (normal landline) phone socket to enable a standard home phone to operate
through the voip facilities of an internet connection

pros
good quality low cost 3g router
good for dodo and telstra usb modems
good for voip if you're a dodo customer
good web interface with many settings and flash update tool

cons
many optus 3g usb modems won't work and many others
can't telnet into router, only http web interface
most mobile broadband sim cards arn't compatible with the sim card socket
voip support is likely limited to dodo customers
wifi has no external aerial connector
limited instructions and documentation
limited vendor support from pendo
no firmware updates available
no increased support for new usb modems

hardware
It appears to share many of the design principles of an EnGenius ESR-6670
https://wiki.openwrt.org/toh/engenius/esr6670?s[]=em63a165ts&s[]=rt3052

, same cpu
and memory (EM63A165TS RT3052), though it has a similarity to the

http://infodepot.wikia.com/wiki/D-Link_DIR-300_vB1

dlink DIR-300-b1, similar board design, same cpu, similar location of components,
similar reset and emergency reflash procedures, hold reset button down,
then turn on router while keeping reset button held down, then release reset button
after 5 - 7 seconds.

oem firmware version is R0.01b7

[img]pendo buddybox.jpg[/img]

Telnet login @ 38400, then at 115200

Jboot B252
JRecovery Version R1.2 2010/08/03 13:48
Flash EON-22F6 0xBF000000-0x400000 x16
...............
Starting kernel @80000000...


▒▒▒▒▒▒▒▒`▒▒xfx怘▒▒▒f▒▒▒▒xfxfff▒▒▒▒f▒▒▒▒▒f▒x▒▒▒▒▒▒▒x▒▒x▒▒▒x▒▒▒▒▒▒▒▒xx▒▒▒▒
`▒▒f▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒怘▒f~▒▒~▒▒▒~▒▒fx▒▒f▒▒▒▒▒
LINUX started...

THIS IS ASIC
AT+VGT=6O=0,1
at+CLCC=0,0,1
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum