rinasmichael
DD-WRT Novice
Joined: 16 Dec 2011
Posts: 11
|
 Posted: Sun Jul 24, 2016 13:49 Post subject: Print server 1043nd v2.1 dont working |
 |
Firmware: DD-WRT v3.0-r30260 std (07/20/16)
TP Link 1043ND 2.1
enabled USB-
USB Printer Support Enable
dmesg | grep usb
| Code: |
<6>[ 6.280000] usbcore: registered new interface driver usbfs
<6>[ 6.280000] usbcore: registered new interface driver hub
<6>[ 6.290000] usbcore: registered new device driver usb
<0>[ 6.450000] forced host mode, usbmode: 00000013
<6>[ 6.490000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 6.500000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 6.510000] usb usb1: Product: EHCI Host Controller
<6>[ 6.510000] usb usb1: Manufacturer: Linux 3.18.37 ehci_hcd
<6>[ 6.520000] usb usb1: SerialNumber: ehci-platform.0
<0>[ 6.550000] forced host mode, usbmode: 00000013
<6>[ 6.590000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 6.600000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 6.610000] usb usb2: Product: EHCI Host Controller
<6>[ 6.610000] usb usb2: Manufacturer: Linux 3.18.37 ehci_hcd
<6>[ 6.620000] usb usb2: SerialNumber: ehci-platform.1
<6>[ 6.850000] usb 1-1: new full-speed USB device number 2 using ehci-platform
<6>[ 7.000000] usbcore: registered new interface driver usblp
<6>[ 7.060000] usb 1-1: New USB device found, idVendor=0924, idProduct=423b
<6>[ 7.070000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 7.080000] usb 1-1: Product: Xerox WorkCentre PE114 Series
<6>[ 7.080000] usb 1-1: Manufacturer: Xerox
<6>[ 7.090000] usb 1-1: SerialNumber: 3562087787......
<6>[ 7.120000] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x0924 pid 0x423B
|
ls -ls /dev/lp0
| Code: |
root@DD-WRT:/jffs# ls -la /dev/lp0
crw-r--r-- 1 root root 180, 0 Jan 1 1970 /dev/lp0 |
netstat -an
| Code: |
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN
tcp 0 0 192.168.1.100:80 192.168.1.6:52828 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52831 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52841 TIME_WAIT
tcp 0 0 192.168.1.100:52284 192.168.1.6:445 ESTABLISHED
tcp 0 0 192.168.1.100:80 192.168.1.6:52848 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52838 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52853 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52851 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52835 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52822 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52844 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52839 TIME_WAIT
tcp 0 1123 192.168.1.100:23 192.168.1.6:52186 ESTABLISHED
tcp 0 0 192.168.1.100:80 192.168.1.6:52832 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52846 TIME_WAIT
tcp 0 0 192.168.1.100:80 192.168.1.6:52826 TIME_WAIT
udp 0 0 0.0.0.0:53 0.0.0.0:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ] DGRAM 13732 /var/run/hostapd/ath0
unix 2 [ ] DGRAM 14715
unix 2 [ ] DGRAM 15346
unix 2 [ ] DGRAM 14105
unix 2 [ ] DGRAM 14205 |
Why it dont working?
Why no 9100 port listening? |
|
