Your reports for Qualcomm/Atheros units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Why no kernel update to 3.18.44 which been released 2016-10-22?
You would have to ask BS that
EA8500 been stuck on exactly same
Linux 3.18.42 #108 SMP PREEMPT Fri Oct 14 01:03:03 CEST 2016 armv7l
w/ 30771, 30796, 30805
Kong's latest for EA8500 --
DD-WRT v3.0-r30800M kongat (10/27/16)
Linux 3.18.42 #231 SMP PREEMPT Thu Oct 27 22:57:22 CEST 2016 armv7l
BTW ---- 30805 has been up 4:35 after I deleted all in Services Priority in QOS.
nDPI is a killer of things I love.... Might work under HFSC ... doubtful, but haven't tried yet, just always used HTB FQ_Codel
TP-Link Archer C7 V2.0 IL
web upgrade: OK significant fastest update. Only about 2-3 min.
Reset: No
Errors: Just flashed.
Thanks for developer(s).
It's a safe upgrade? All LEDs re working, etc..? With the prevbuild the C7 vs had some troubles..
Thanks!
I did upgrade from r30731. It was relatively good build. Other was skipped. Speedtest with this build is slower. But old update took about 10 minutes, and this only 2-3 minutes like in the past. It seems the router works, but it not stressed by me.
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Fri Oct 28, 2016 21:16 Post subject:
it seems tatsuya46 has less reports this time got lucky..
and a lots of old bugs fixed like wi-fi status speed reports
and some other related to ath9k
sadly the last 2 builds are not good for me all my smart devices have serious issues, games network loss, and instability for some smart applications so i reverted to
30731 all back to normal
i ve made 16 days with 30731
http://svn.dd-wrt.com/ticket/5605 _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Running this build on my TP-Link TL-WR841ND v10. It is a lot better than the previous build for me.
I do keep getting router crashes when using client mode and a vap at the same time. I can't login to check the logs and have to turn the router on and off. This only seems to happen when vap is enabled in combination with client mode. But it might have nothing to do with each other.
Other than that the web interface is snappy, feels fast again.
1 x Archer C7 v2 (AP/VAP)
2 x Archer C7 v2 (Client Mode)
All devices updated from v3.0-r30016 std (06/24/16) via web interface without reset.
Everything running smoothly so far (~ 18 h). WiFi seems to be better than with r30016, signal levels are being displayed correctly as far as I can tell.
Will udate another Archer C7 v2 running in a production environment (AP/VAP, many WiFi users) today and report any problems.
Router: DIR-615 i1
Status: Good
Reset: Reset to defaults after flashing, then erased NVRAM
Errors: None
Router: TL-WDR3600
Status: Bad
Reset: Reset to defaults after flashing, then erased NVRAM
Errors: Horrible latency on my Android phone on both the 2.4 GHz and 5GHz bands; multiple times per minute packets don't come through for 3~ seconds, then all of a sudden there is a data burst. This happens consistently.
Router: TP-Link Archer C7 v2
Status: BAD
Reset: Yes, 30-30-30
Errors: 5 Ghz unusable on higher channels it seems, as it causes high CPU & load avg, slow GUI, and often unable to connect to it.