R7800 Discussion - 2017

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 35, 36, 37  Next
Author Message
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Feb 14, 2017 2:17    Post subject: Reply with quote
<Kong> wrote:
tatsuya46 wrote:
if u have time kong could u post a build with no other wifi related changes except latest ath10k fw firmware-5.bin_10.4-3.4-00072, and one build using ath10k fw 10.4-3.3-00102?

its either the -3.4 fw or something else that broke client mode+vap beyond r31170, in r31174 most likely.


Still playing a bit with the R9000 and my line upgrade is on the way, who knows if I'm still online in 2 days:-)


np. actually since r9000 also has qca9984, u could test this out if u can. on the ac radio, select client mode to another ac router. then make a vap on that same client mode ac radio. have it set as vht80 only (not 80+80 or 160). the radio wont come up. delete the vap and the radio will come up, or select ht40 and it will too, but vap wont broadcast. could you confirm?

last working build is nightly r31170. same hardware controlled by the same firmware driven by the same driver u should have same results for breaking/fixing this specific issue. my 60/6 line is gone as of yesterday, promotion expired, so now im back to 30/5 using client mode via wifi (i can still test qos changes etc though, they also affect this setup).

here is ticket if wanted, config included. http://svn.dd-wrt.com/ticket/5728

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Sponsor
dissent
DD-WRT User


Joined: 04 May 2016
Posts: 123

PostPosted: Tue Feb 14, 2017 7:25    Post subject: Reply with quote
Well, actually hardware nat drivers are publicly available and it supports qos even.
One part of it is already taken into ddwrt for r9000 Wink

Raymod2, you may want to go for https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-23sf.37477/
This one is pretty reliable and utilizes hardware nat
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Tue Feb 21, 2017 0:56    Post subject: Reply with quote
bs builds for most if not all ipq806x seem to have this problem, the .img is broken but the webflash works. ea8500 also has/had this same thing.
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Wed Feb 22, 2017 7:13    Post subject: Reply with quote
here is latest build r31494 with many fixes like repeater mode, qam256 etc. brainslayer build.

ive tested & using it, it works.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Thu Feb 23, 2017 21:37    Post subject: Reply with quote
jerrytouille wrote:
Malachi wrote:
Has anyone done serial recovery on an r7800?


Oops did the new Kong build 02/23 brick your rt?? Confused


I doubt it, as I flashed it on mine before uploading.

But I just checked, on the R7800 and the R7500v2 you can start the recovery tftpd by pressing reset button, then power on, count till 15 and voila tftpd is started and you can tftp a new firmware to the router, thus no need for serial recovery.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1304

PostPosted: Fri Feb 24, 2017 19:12    Post subject: Reply with quote
New Kong build 02/24 released, likely to fix some bugs give it a try
ftth
DD-WRT Novice


Joined: 25 Nov 2013
Posts: 16

PostPosted: Fri Feb 24, 2017 19:29    Post subject: Reply with quote
Both 2/23 and 2/24 Kong releases are DD-WRT v3.0-r31500M
MrDoh
DD-WRT Guru


Joined: 04 Dec 2012
Posts: 647

PostPosted: Sat Feb 25, 2017 8:45    Post subject: Reply with quote
ftth wrote:
Both 2/23 and 2/24 Kong releases are DD-WRT v3.0-r31500M


Sometimes a bug can be fixed or a change made without incrementing the build number (no change in source control repository). Kong will have to say what's been changed between the two builds if they just have different dates.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Sat Feb 25, 2017 10:40    Post subject: Reply with quote
MrDoh wrote:
ftth wrote:
Both 2/23 and 2/24 Kong releases are DD-WRT v3.0-r31500M


Sometimes a bug can be fixed or a change made without incrementing the build number (no change in source control repository). Kong will have to say what's been changed between the two builds if they just have different dates.


A change for turbo qam in 2.4G

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun Feb 26, 2017 0:48    Post subject: Reply with quote
r31500m has working qam256 so far. standard 802.11n devices still connect fine with it enabled, i see vht40 (i have 40mhz on) & max broadcasted rate is 800mbps in beacon info.

confirmed working with my bcm4360 based nic in my desktop.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun Feb 26, 2017 8:47    Post subject: Reply with quote
kong could u commit ur fix to qam256 (and even for qos)? cause it works, thank u again.
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun Feb 26, 2017 9:25    Post subject: Reply with quote
confirm reports, router seems to be "crashing" every 1 hour, may be related to wifi security key renewal or not. my connected devices reset on the hour, as well as router uptime, not happening on brainslayer r31495.

reverting. kong check please.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Sun Feb 26, 2017 10:02    Post subject: Reply with quote
tatsuya46 wrote:
confirm reports, router seems to be "crashing" every 1 hour, may be related to wifi security key renewal or not. my connected devices reset on the hour, as well as router uptime, not happening on brainslayer r31495.

reverting. kong check please.


I do not think, that the changes between r31495 and r31500 would break wifi, maybe turboqam is the problem?

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun Feb 26, 2017 10:06    Post subject: Reply with quote
<Kong> wrote:
tatsuya46 wrote:
confirm reports, router seems to be "crashing" every 1 hour, may be related to wifi security key renewal or not. my connected devices reset on the hour, as well as router uptime, not happening on brainslayer r31495.

reverting. kong check please.


I do not think, that the changes between r31495 and r31500 would break wifi, maybe turboqam is the problem?


idk, im not saying its a wifi crash, its a entire router crash, or at least router uptime reset. cause i happened to be using it during that period, no "entire crash" happened, but i did a have random large lag that i didnt think about about, im on Ethernet currently (using client mode over wifi).

already reverted to brainslayer r31495, half way to 1hr, will wait again. will probably be no issue. then will try ur build again with turbo qam off.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada

PostPosted: Sun Feb 26, 2017 11:40    Post subject: Reply with quote
tatsuya46 wrote:
<Kong> wrote:
tatsuya46 wrote:
confirm reports, router seems to be "crashing" every 1 hour, may be related to wifi security key renewal or not. my connected devices reset on the hour, as well as router uptime, not happening on brainslayer r31495.

reverting. kong check please.


I do not think, that the changes between r31495 and r31500 would break wifi, maybe turboqam is the problem?


idk, im not saying its a wifi crash, its a entire router crash, or at least router uptime reset. cause i happened to be using it during that period, no "entire crash" happened, but i did a have random large lag that i didnt think about about, im on Ethernet currently (using client mode over wifi).

already reverted to brainslayer r31495, half way to 1hr, will wait again. will probably be no issue. then will try ur build again with turbo qam off.


back to brainslayer r31495, no issue, back to kong r31500M with turboqam off, no issue again past 1 hr.

so it must be something with turboqam, but turboqam in it's current state is working.. ive had not had any turboqam devices connected during this time test period, im the only one with a turboqam device, and my pc is passworded/unshared, & is plugged in by default via ethernet etc.

over 3 hrs up no issue now with turbo qam256 off. it must be related to that..

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..



Last edited by tatsuya46 on Sun Feb 26, 2017 14:46; edited 1 time in total
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 35, 36, 37  Next Display posts from previous:    Page 6 of 37
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum