Has anyone got this working after rebooting the router? My config seems fine until I reboot. Then it seems to go back to some sort of default settings.
Definetely works, really well in fact, many thanks and too much appreciated your input in here.
I just did a simple test with the VLAN1 as I didn't use the bridge, but seeing that router on where I did this has the VLAN1 mapped as the management for my network I presume that if I map the VLAN that I have for the HMA for example I will be kind of double tunneled.
I need to do further testing as I would like to integrate with my Active Directory, Layer 3 switching and many other things.
My VPN is managed by the remote access from Microsoft Windows Server 2012 RII, but for these xmass time I will deep into further details with this SoftEther thing as I don't expect any connections rather than me testing.
Out of topic: Do you know how can I clear all the dynamic DNS I did created in the past for testing ?
Many thanks and merry xmass everyone.
Grettings from Barcelona. _________________ 7 x Broadcom BCM5300 chip rev 1 - Asus RT-AC66U ----> v3.0-r31899 giga (04/24/17)
1 x Marvel Armada 385 - LinkSys WRT1900ACS ---------> v3.0-r31899 std (04/24/17)
1 x Marvel Armada 370/XP - LinkSys WRT1900AC -------> v3.0-r31899 std (04/24/17)
1 x QCA IPQ806X - Linksys EA8500 -------------------> v3.0-r31899 std (04/24/17)
1 x Broadcom BCM4709 - Asus RT-AC3200 --------------> v3.0-r30880 std (11/14/16)
1 x ARMv7 Processor rev 0 (v7l) - Asus RT-AC68U ----> v3.0-r30880 std (11/14/16)
1 x ARMv7 Processor rev 0 (v7l) - Linksys EA6900 ---> v3.0-r30880 std (11/14/16)
1 x ARM Cortex-A9 Processor - Net Gear R7000 -------> v3.0-r30880 std (11/14/16)
5 x Broadcom BCM4716 chip rev 1 - Linksys E4200 ----> v24-sp2 (06/07/14) kingkong
1 x Broadcom BCM5300 chip rev 1 - Asus RT-AC66U ----> v24-sp2 (04/01/13) giga
I run into an issue connecting to the router following your steps. Clearly im missing something since other ppl managed to get this to work with ur toturial.
Basically on the Softether, when i create a new setting, i insert my router's IP Address (my router is a linksys wrt3200acm) and it fails to connect.
My router IP address is 192.168.1.254 which i can access to its webpage config. i have followed your tutorial by enabling both 2 options on the softether setup on the router's webpage (Server and Bridge) and i have rebooted the router after that on the administration menu. Tbh i dont know what am i missing. any ideas?
1. Seems like Softether will lose all the setting after rebooting router.
2. although I chose to bind "br0", actually, it didn't. Client can't connect to VPN server. I had to manually to create a new bridge tap device "tap_test", then logon to router by telnet and add that interface to bridge (br0),brctl addif br0 tap_test, after that everything works. I got that idea from the following webpage.