New build: DD-WRT v3.0 --- 31690 --- 2017/03/17

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3  Next
Author Message
ascensions
DD-WRT Novice


Joined: 16 Dec 2016
Posts: 9
Location: Greensboring

PostPosted: Sun Mar 19, 2017 2:12    Post subject: Reply with quote
Router: 841ND V9
Firmware: DD-WRT v3.0-r31690
Kernel: Linux 3.18.48 #2273
Status: All Good.
Reset: Nada enchilada.
Errors: Nope and more nope.

Mucho appreciation once again.
Sponsor
h8red
DD-WRT Guru


Joined: 28 Jun 2011
Posts: 580
Location: Vilnius, Lithuania

PostPosted: Sun Mar 19, 2017 12:40    Post subject: Reply with quote
Router: TP-Link TL-WR842ND v2
Kernel: 3.10.105 #29954
Status: OK
Reset: no
Errors: no

Web upgrade from previous beta

_________________
[Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
Phantomsfbw
DD-WRT Novice


Joined: 02 May 2015
Posts: 14

PostPosted: Sun Mar 19, 2017 16:21    Post subject: R9000 Reply with quote
Unable to connect any device if 2.4GHz Turbo Qam is turned on. Devices will see the 2.4GHz Turbo Qam network, but will continually ask for password when attempting to connect. States the password is incorrect.

Turn off Turbo Qam and 2.4GHz and everything works fine.
pepe10000
DD-WRT Novice


Joined: 23 Oct 2012
Posts: 27

PostPosted: Sun Mar 19, 2017 17:35    Post subject: Reply with quote
Router Model: TP-Link TL-WR2543ND
Firmware Version: DD-WRT v3.0-r31690
Web upgrade: OK
Reset: No.
Status: O.K.
Errors: None

Used as a Wifi repeater and all O.K.
redbutcher
DD-WRT Novice


Joined: 01 Mar 2017
Posts: 25

PostPosted: Sun Mar 19, 2017 21:23    Post subject: Reply with quote
Router: Netgear R7800
Firmware: DD-WRT v3.0-r31690 (03/17/17)
Kernel: Linux 3.18.48 #131 SMP PREEMPT Fri Mar 17 01:22:47 CET 2017 armv7l
Status: Good
Reset: Yes (no choice otherwise no WAN connection to clients)
Errors: None
B@R
DD-WRT Guru


Joined: 16 Apr 2011
Posts: 609
Location: Israel

PostPosted: Mon Mar 20, 2017 22:50    Post subject: Reply with quote
TP-Link Archer C7 V2.0 IL.
After one day working well the router stops to route anything. It had WAN IP, it's own IP, I got the web interface, but internet was not accessible. In the SYSLOG
I saw a few strange strings.

Jan 1 00:01:07 Archer-C7 daemon.err process_monitor[2719]: Last update failed, we need to re-update after 30 seconds

And many msgs like these:
Code:

Mar 19 23:55:20 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 WPA: pairwise key handshake completed (RSN)
Mar 20 00:12:37 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: disconnected due to excessive missing ACKs
Mar 20 00:12:38 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: authenticated
Mar 20 00:12:38 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: associated (aid 1)
Mar 20 00:12:38 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 RADIUS: starting accounting session D15B8193BDCE0F6E
Mar 20 00:12:38 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 WPA: pairwise key handshake completed (RSN)
Mar 20 00:13:02 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: disconnected due to excessive missing ACKs
Mar 20 00:13:03 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: authenticated
Mar 20 00:13:03 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: associated (aid 1)
Mar 20 00:13:03 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 RADIUS: starting accounting session 2879643A27FF5B4A
Mar 20 00:13:03 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 WPA: pairwise key handshake completed (RSN)
Mar 20 00:18:06 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: disconnected due to excessive missing ACKs
Mar 20 00:18:07 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: authenticated
Mar 20 00:18:07 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: associated (aid 1)
Mar 20 00:18:07 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 RADIUS: starting accounting session B7A5821CF33C6424
Mar 20 00:18:07 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 WPA: pairwise key handshake completed (RSN)
Mar 20 00:20:19 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: disconnected due to excessive missing ACKs
Mar 20 00:20:20 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: authenticated
Mar 20 00:20:20 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: associated (aid 1)
Mar 20 00:20:20 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 RADIUS: starting accounting session B7A5821CF33C6424
Mar 20 00:20:20 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 WPA: pairwise key handshake completed (RSN)
Mar 20 00:21:11 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: disconnected due to excessive missing ACKs
Mar 20 00:21:12 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: authenticated
Mar 20 00:21:12 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 IEEE 802.11: associated (aid 1)
Mar 20 00:21:12 Archer-C7 daemon.info hostapd: ath0: STA 44:6d:57:4f:60:77 RADIUS: starting accounting session 0056CE34C04DE650

Not seen in early versions.
teslacoil
DD-WRT User


Joined: 29 Nov 2015
Posts: 129

PostPosted: Tue Mar 21, 2017 2:09    Post subject: Reply with quote
Router: DIR-615 i1
Status: Good
Reset: Reset to defaults with flash procedure; erased NVRAM before and after flash
Errors: None

Router: TL-WDR3600 v. 1.5
Status: Good
Reset: Reset to defaults with flash procedure; erased NVRAM before and after flash
Notes: Appears to be more stable than r31571. The router had multiple random crashes/reboots on r31571. With this build, it's been up for almost 3 days without 1 crash/reboot. 5 GHz LED not illuminating, but radio is working.

* http://svn.dd-wrt.com/ticket/3736


Last edited by teslacoil on Tue Mar 21, 2017 13:19; edited 1 time in total
ndttung
DD-WRT Novice


Joined: 21 Mar 2017
Posts: 3

PostPosted: Tue Mar 21, 2017 4:24    Post subject: Reply with quote
Linksys WRT160NL

DD-WRT v3.0-r31690 std (03/17/17)
Kernel: 3.18.48
Status: Fail
Reset: Yes
Errors: Unable to install, keep blinking power led all times, back to DD-WRT v3.0-r31571 std (03/04/17) working fine
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Tue Mar 21, 2017 4:42    Post subject: Reply with quote
ndttung wrote:
Linksys WRT160NL

DD-WRT v3.0-r31690 std (03/17/17)
Kernel: 3.18.48
Status: Fail
Reset: Yes
Errors: Unable to install, keep blinking power led all times, back to DD-WRT v3.0-r31571 std (03/04/17) working fine

The firmware.bin size is too large to install on 160NL after build r31645.
Not sure if / when this will be fixed....They might not fix it this time Evil or Very Mad
jclem2000
DD-WRT Novice


Joined: 05 Oct 2016
Posts: 6

PostPosted: Tue Mar 21, 2017 7:57    Post subject: Upgraded to r31690 Reply with quote
Router: Buffalo WZR-HP-AG300H (WZR-600-DHP)
Firmware: DD-WRT v3.0-r31690 std (03/17/17)
Kernel: Linux 3.10.105 #29878 Fri Mar 17 02:01:14 CET 2017 mips
Status: Good
Reset: No
Errors: 5589, 5594
Resolved: 5653 - r30826 Limited to 20MHz channel width in 5GHz band


Router: D-Link DIR-615-E3/E4
Firmware: DD-WRT v3.0-r31690 std (03/17/17)
Kernel: Linux 3.10.105 #29878 Fri Mar 17 02:01:14 CET 2017 mips
Status: Good
Reset: No
Errors: None
Detection
DD-WRT User


Joined: 19 Jan 2012
Posts: 403
Location: UK

PostPosted: Tue Mar 21, 2017 9:29    Post subject: Reply with quote
mrjcd wrote:
ndttung wrote:
Linksys WRT160NL

DD-WRT v3.0-r31690 std (03/17/17)
Kernel: 3.18.48
Status: Fail
Reset: Yes
Errors: Unable to install, keep blinking power led all times, back to DD-WRT v3.0-r31571 std (03/04/17) working fine

The firmware.bin size is too large to install on 160NL after build r31645.
Not sure if / when this will be fixed....They might not fix it this time Evil or Very Mad


Strange, it installed fine on my 160NL


_________________
TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6410
Location: UK, London, just across the river..

PostPosted: Tue Mar 21, 2017 10:35    Post subject: Reply with quote
Router Model TPLINK WR1043ND V2
Firmware Version DD-WRT v3.0-r31690 std (03/17/17)
Kernel Version Linux 3.18.48 #2279 Fri Mar 17 03:46:32 CET 2017 mips

reset: yes x2
status: operational
errors: none so far

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Tue Mar 21, 2017 12:21    Post subject: Reply with quote
Detection wrote:
mrjcd wrote:
ndttung wrote:
Linksys WRT160NL

DD-WRT v3.0-r31690 std (03/17/17)
Kernel: 3.18.48
Status: Fail
Reset: Yes
Errors: Unable to install, keep blinking power led all times, back to DD-WRT v3.0-r31571 std (03/04/17) working fine

The firmware.bin size is too large to install on 160NL after build r31645.
Not sure if / when this will be fixed....They might not fix it this time Evil or Very Mad


Strange, it installed fine on my 160NL



Yes Sir, my bad -- the r31690 is ok for file size
r31690
7,996,416 bytes

Linksys WRT160NL
DD-WRT v3.0-r31690 std (03/17/17)
Linux 3.10.105 #29898 Fri Mar 17 02:51:15 CET 2017 mips

The r31671 & r31678 were too big both at -
8,000,512

I have run across some weirdness where 31690 will not install on some of my units --

If you run dmesg and look just under the MTD parts you'll see 'Oops: flash id'
See if yours is ->Oops: flash id 0x1c2017 .
and
maybe ndttung has ->Oops: flash id 0xc22017 .

I have two E2100L & two 160NL. All have ->Oops: flash id 0xc22017 .
None of these four routers will install build r31645 or later (GUI or TFTP - they just will not install).
And most builds of last few years always required TFTP to get the firmware on them.

Also have a third 160NL which has ->Oops: flash id 0x1c2017 .
It will install any build (provided file size is not too big)

I was looking into 'this' the other day but got bored messing with it.
ascensions
DD-WRT Novice


Joined: 16 Dec 2016
Posts: 9
Location: Greensboring

PostPosted: Tue Mar 21, 2017 12:54    Post subject: Reply with quote
Does anyone know if the ACK time is auto when set to 0 on this build? I've tried various settings on a bridge at 50m and setting it to 0 is always slower than setting it to 350 (which seems ridiculously too far for my link but works).
Detection
DD-WRT User


Joined: 19 Jan 2012
Posts: 403
Location: UK

PostPosted: Tue Mar 21, 2017 13:37    Post subject: Reply with quote
mrjcd wrote:
Detection wrote:
mrjcd wrote:
ndttung wrote:
Linksys WRT160NL

DD-WRT v3.0-r31690 std (03/17/17)
Kernel: 3.18.48
Status: Fail
Reset: Yes
Errors: Unable to install, keep blinking power led all times, back to DD-WRT v3.0-r31571 std (03/04/17) working fine

The firmware.bin size is too large to install on 160NL after build r31645.
Not sure if / when this will be fixed....They might not fix it this time Evil or Very Mad


Strange, it installed fine on my 160NL



Yes Sir, my bad -- the r31690 is ok for file size
r31690
7,996,416 bytes

Linksys WRT160NL
DD-WRT v3.0-r31690 std (03/17/17)
Linux 3.10.105 #29898 Fri Mar 17 02:51:15 CET 2017 mips

The r31671 & r31678 were too big both at -
8,000,512

I have run across some weirdness where 31690 will not install on some of my units --

If you run dmesg and look just under the MTD parts you'll see 'Oops: flash id'
See if yours is ->Oops: flash id 0x1c2017 .
and
maybe ndttung has ->Oops: flash id 0xc22017 .

I have two E2100L & two 160NL. All have ->Oops: flash id 0xc22017 .
None of these four routers will install build r31645 or later (GUI or TFTP - they just will not install).
And most builds of last few years always required TFTP to get the firmware on them.

Also have a third 160NL which has ->Oops: flash id 0x1c2017 .
It will install any build (provided file size is not too big)

I was looking into 'this' the other day but got bored messing with it.


dmesg
->Oops: flash id 0x1c2017

Not sure how to look for ndttung?

_________________
TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
Goto page Previous  1, 2, 3  Next Display posts from previous:    Page 2 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum