Netgear WNDR3700 V4
DD-WRT v3.0-r31722 std (03/21/17)
Linux 3.18.48 #2587 Tue Mar 21 06:13:45 CET 2017 mips
working ok
--
Linksys EA8500
DD-WRT v3.0-r31722 std (03/21/17)
Linux 3.18.48 #131 SMP PREEMPT Fri Mar 17 01:22:47 CET 2017 armv7l
working ok --- but with TurboQAM enabled No clients can connect to ath0
http://svn.dd-wrt.com/ticket/5738
--
Linksys WRT160NL
DD-WRT v3.0-r31722 std (03/21/17)
Linux 3.10.105 #30268 Tue Mar 21 04:59:29 CET 2017 mips
working -
Will only install on wrt160NL or e2100L with flash id 0x1c2017 .
Will NOT install on wrt160NL or e2100L with flash id 0xc22017 .
http://svn.dd-wrt.com/ticket/5412#comment:31
The WNDR3700 V4 was being pissy for a second for some reason.
root@--:~# dmesg | tail
<4>[63123.510000] IMQ: autocreate imq1 NS 803ba220
<6>[63123.510000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[63123.520000] Hooking IMQ before NAT on PREROUTING.
<6>[63123.530000] Hooking IMQ after NAT on POSTROUTING.
<6>[93787.650000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is up
<6>[93815.660000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 3 is down
<3>[99072.410000] ath: phy1: Could not kill baseband RX
<3>[99072.650000] ath: phy1: Could not kill baseband RX
<3>[99072.830000] ath: phy1: Could not kill baseband RX
<3>[99073.690000] ath: phy1: Could not kill baseband RX
Weird thing is there is not a hint of this in syslog.
Been using as main router. Have another wndr3700v4 running as WAP with no such dmesg crap -- up 2 days
She better be nice or I'll have to put her back in the closet
Last edited by mrjcd on Fri Mar 24, 2017 17:24; edited 1 time in total
Router: TP-Link TL-WR841N v8
Firmware: DD-WRT v3.0-r31722 std (03/21/17)
Kernel: Linux 3.18.48 #2561 Tue Mar 21 05:44:35 CET 2017 mips
Status: Ok
Reset: No
Errors: None
Upgraded with no reset from r31690, which was good with 4 days uptime and no random reboots or other issues. Hopefully r31722 is more of the same goodness.
Model name: TPLINK WR1043ND V3
Version Firmware: DD-WRT v3.0-r31722 std (03/21/17)
Versione Kernel: Linux 3.18.48 #2571 Tue Mar 21 05:51:04 CET 2017 mips
Model name: NETGEAR WNDR3800
Version Firmware: DD-WRT v3.0-r31722 std (03/21/17)
Versione Kernel: Linux 3.18.48 #2571 Tue Mar 21 05:51:04 CET 2017 mips
Reset: No
Errors: after flash no gui to restart, the error in the log
Kernel Version: Linux 3.10.105 #30322 Tue Mar 21 05:41:41 CET 2017 mips
Status: (updated 3/28/2017) Errors found after further testing. Was working stable initially. Then suddenly certain devices are disconnecting due to excessive missing acks found in syslog.
Reset: No (regular upgrade via telnet)
Errors: Errors found/wireless sometimes disconnect due to missing acks
CPU Info:
CPU Model: Atheros AR7241 ver 1 rev 1.1 (0x0101)
CPU Cores: 1
CPU Clock: 400 MHz
Load Average: 3% 0.02, 0.02, 0.04
Router Model: Netgear WNDR3700 V4
Firmware Version: DD-WRT v3.0-r31722 std (03/21/17)
Kernel Version: Linux 3.18.48 #2587 Tue Mar 21 06:13:45 CET 2017 mips
Up and running for just over 4 days. The only problem is with the Syslog. I have Log Management enabled and Log Level set to High. Syslog is no longer showing dropped and rejected connections, but standard system notifications still appear. This problem also appeared in kong's (Broadcom) version r31570M. _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
having trouble with opkg update/upgrade. ultimately I went on a wild goose chase completely reinstalling opkg thinking that was the issue. Turns out that wget in this version was not fully downloading files which didn't allow opkg to finish. I rolled back to a version where I knew it worked Firmware: DD-WRT v3.0-r30880 std (11/14/16)
I'm now in the process of re-installing everything after I tore through my opt directories with rm -rf to try and figure out what file might be corrupted.
Last edited by moonglows on Wed Mar 29, 2017 6:47; edited 1 time in total
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Mon Mar 27, 2017 7:25 Post subject:
vsg wrote:
Model name: NETGEAR WNDR3800
Version Firmware: DD-WRT v3.0-r31722 std (03/21/17)
Versione Kernel: Linux 3.18.48 #2571 Tue Mar 21 05:51:04 CET 2017 mips
Reset: No
Errors: after flash no gui to restart, the error in the log
nothing was changed its just color coding that was added, which was a poor idea cause those less experienced will panic. those same messages were there for a very long time prior. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
updated previous post. had issues with opkg and found out it was tied to this release. I didn't step backwards release by release but just went directly to a release where I knew it worked for me.
Router: Buffalo WZR-HP-AG300H
Kernel:
Status: OK
Reset: no
Errors: yes
USB storage does not mount.
Ext3 and Ext4 formatted USB disks don't seem to be recognised or supported. The ext3.ko and ext4.ko modules seem to be missing in the modules directory.
This feature was last working for me in r28598. I have not tested versions in between that and the current version.