New build: DD-WRT v3.0 --- 31825 --- 2017/04/06

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3  Next
Author Message
wilkcards
DD-WRT Novice


Joined: 14 Mar 2017
Posts: 1

PostPosted: Sat Apr 08, 2017 5:14    Post subject: Reply with quote
WDR3600...no problems since updating 4/6
Sponsor
Frakko
DD-WRT User


Joined: 06 May 2016
Posts: 165

PostPosted: Sat Apr 08, 2017 5:41    Post subject: Reply with quote
Router: TPLINK WR1043ND V3
Firmware: DD-WRT v3.0-r31825 (04/06/17)
Kernel: Linux 3.18.48 #3078 Thu Apr 6 02:30:55 CEST 2017 mips
Status: OK
Reset: No
Errors: None so far
Frakko
DD-WRT User


Joined: 06 May 2016
Posts: 165

PostPosted: Sat Apr 08, 2017 9:30    Post subject: Reply with quote
Router TP-Link TL-WR841ND v9
Version Firmware DD-WRT v3.0-r31825 std (04/06/17)
Version Kernel Linux 3.18.48 #3072 Thu Apr 6 02:25:38 CEST 2017 mips
Status: OK
Reset: No
Errors: None so far
h8red
DD-WRT User


Joined: 28 Jun 2011
Posts: 472
Location: Vilnius, Lithuania

PostPosted: Sat Apr 08, 2017 12:51    Post subject: Reply with quote
Router: TP-Link TL-WR842ND v2
Kernel: 3.10.105 #30900
Status: OK
Reset: no
Errors: no

Web upgrade from previous beta

_________________
[Atheros] TP-Link TL-WR842ND v2 rev 31899 std (VPN and PPTP server, AD blocking, YAMon3.2.4)
[Atheros] TP-Link TL-WR740N v3 rev 30880 std (AD blocking)
[Ralink] Asus rt-n10plus C1 rev 31825 std (AP with NAT, QoS, AD blocking)
petra222
DD-WRT Novice


Joined: 10 Dec 2011
Posts: 10

PostPosted: Tue Apr 11, 2017 21:58    Post subject: Reply with quote
Router TPLINK TL-WDR4300 v1

Firmware Version DD-WRT v3.0-r31825 std (04/06/17)

Kernel Version Linux 3.10.105 #30840 Thu Apr 6 01:33:05 CEST 2017 mips

Status: OK
Reset: No
Errors: None

Up 3 days now, Voip,Forwarded ports,4 ip cams,4 port switch connected,5 lan computers,2 wireless laptops,tablets,phones, my flakey android tab doesn't like 5GHz but newer stuff is fine!
All in all, running great "gui" seams more responsive.
Thanks To Developers for this build.
positronic
DD-WRT Novice


Joined: 11 Apr 2017
Posts: 3

PostPosted: Wed Apr 12, 2017 12:48    Post subject: Buffalo WZR-HP-G300NH + DD-WRT v3.0-r31825 std (04/06/17) Reply with quote
Router: Buffalo WZR-HP-G300NH
Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Kernel: Linux 3.10.96 #16689 Mon Feb 1 01:10:30 CET 2016 mips
Status: OK after TFTP recovery / TFTP FW upgrade
Reset: erase nvram
Errors: Brick on webupgrade

As far as I can tell, despite not being a full comprehensive test of all Firmware functions, the basic stuff works OK, WIFI stability seems solid and there are no disconnects so far after 24 hours of flashing.

Only issue is upgrading from r29346 to -r31825 via web interface bricks unit.

Originally I was on Buffalo DDWRT official firmware version V24-SP2 build 19484 Beta and it web upgraded to r29346 just fine.

Did some digging again, found this report http://svn.dd-wrt.com/ticket/4742 and it still seems to apply.
CanadaMoose
DD-WRT Novice


Joined: 12 Apr 2017
Posts: 1

PostPosted: Wed Apr 12, 2017 15:26    Post subject: WNDR3700v2 Reply with quote
Router Model: Netgear WNDR3700v2
Firmware Version: DD-WRT v3.0-r31825 std (04/06/17)
Kernel Version: Linux 3.10.105 #30904 Thu Apr 6 02:51:57 CEST 2017 mips
Status: OK
Reset: No
Errors:
1. httpd (GUI) starts with semi-random port (e.g. "httpd -p isabled") until I restart httpd (I use 'stopservice httpd', 'startservice httpd'). This happens on every reboot.

2. udhcpc does not start, so there is no automatic WAN address received via DHCP. This does not happen on subsequent reboots, only after firmware upgrade, power cycle. Workaround: change WAN connection to "Static IP", apply settings, and change it back to "Automatic Configuration - DHCP" and apply settings again. Now ps shows me that udhcpc started:
2301 root 1168 S udhcpc -i eth1 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes

Both issues have existed in previous builds going back to at least r30826.

Otherwise, this build seems good.
tzok
DD-WRT Novice


Joined: 10 Aug 2011
Posts: 44

PostPosted: Thu Apr 13, 2017 9:34    Post subject: Reply with quote
Router: TP-Link TL-WR1043ND v1 [Atheros AR9132 rev 2]
Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Status: Kind of working...
Reset: No
Errors: Yes

After upgrading via webupdate from 30880 entered bootloop, but powercycling rescued the situation.

When it works it works much faster than 30880, but after some time it stops restponding on DNS queries for ~2 minutes, and then starts to work again. It seems that connecting a new WiFi client hangs the dnsmasq daemon.

Router is configured as an gateway with WiFi AP. It also acts as a local DNS server:
Used Domain: LAN & WLAN
LAN Domain: lan.mydomain.com
DNSMasq: Enable
Local DNS: Enable
No DNS Rebind: Enable
Query DNS in Strict Order: Enable
Add Requestor MAC to DNS Query: Disable
Additional DNSMasq Options:
local=/lan.mydomain.org/
expand-hosts

mydomain.org is an existing domain.

Heres the log output:
Code:

System Log
Apr 13 10:25:07 router syslog.info syslogd started: BusyBox v1.26.2
Apr 13 08:25:07 router user.info : dnsmasq : dnsmasq daemon successfully started
Apr 13 08:25:07 router user.info : telnetd : telnet daemon successfully started
Apr 13 08:25:07 router user.info : ttraff : traffic counter daemon successfully started
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] booting platform Atheros AR9132 rev 2 (0xb9)
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] Determined physical RAM map:
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] memory: 02000000 @ 00000000 (usable)
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Zone ranges:
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Movable zone start for each node
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Early memory node ranges
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] On node 0 totalpages: 8192
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat 802c0fa0, node_mem_map 81000000
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] Normal zone: 64 pages used for memmap
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Apr 13 08:25:07 router kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Apr 13 08:25:07 router kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] Writing ErrCtl register=00000000
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] Readback ErrCtl register=00000000
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] Memory: 29224k/32768k available (2149k kernel code, 3544k reserved, 365k data, 172k init, 0k highmem)
Apr 13 08:25:07 router kern.info kernel: [ 0.000000] NR_IRQS:83
Apr 13 08:25:07 router kern.emerg kernel: [ 0.000000] irq init done
Apr 13 08:25:07 router kern.warn kernel: [ 0.000000] plat_time_init: plat time init done
Apr 13 08:25:07 router kern.info kernel: [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Apr 13 08:25:07 router kern.info kernel: [ 0.080000] pid_max: default: 32768 minimum: 301
Apr 13 08:25:07 router kern.info kernel: [ 0.080000] Mount-cache hash table entries: 512
Apr 13 08:25:07 router kern.info kernel: [ 0.090000] NET: Registered protocol family 16
Apr 13 08:25:07 router kern.info kernel: [ 0.110000] bio: create slab at 0
Apr 13 08:25:07 router kern.info kernel: [ 0.120000] Switching to clocksource MIPS
Apr 13 08:25:07 router kern.info kernel: [ 0.120000] NET: Registered protocol family 2
Apr 13 08:25:07 router kern.info kernel: [ 0.130000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.130000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.140000] TCP: Hash tables configured (established 512 bind 512)
Apr 13 08:25:07 router kern.info kernel: [ 0.140000] TCP: reno registered
Apr 13 08:25:07 router kern.info kernel: [ 0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Apr 13 08:25:07 router kern.info kernel: [ 0.160000] NET: Registered protocol family 1
Apr 13 08:25:07 router kern.notice kernel: [ 0.160000] gpio_proc: module loaded and /proc/gpio/ created
Apr 13 08:25:07 router kern.info kernel: [ 0.170000] Register LED Device
Apr 13 08:25:07 router kern.notice kernel: [ 0.170000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
Apr 13 08:25:07 router kern.info kernel: [ 0.180000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Apr 13 08:25:07 router kern.info kernel: [ 0.190000] msgmni has been set to 57
Apr 13 08:25:07 router kern.info kernel: [ 0.190000] io scheduler noop registered
Apr 13 08:25:07 router kern.info kernel: [ 0.200000] io scheduler deadline registered (default)
Apr 13 08:25:07 router kern.info kernel: [ 0.200000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Apr 13 08:25:07 router kern.info kernel: [ 0.230000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
Apr 13 08:25:07 router kern.info kernel: [ 0.240000] console [ttyS0] enabled, bootconsole disabled
Apr 13 08:25:07 router kern.emerg kernel: [ 0.250000] guessed flashsize = 8M
Apr 13 08:25:07 router kern.emerg kernel: [ 0.250000] scanning for root partition
Apr 13 08:25:07 router kern.emerg kernel: [ 0.260000] tplink uboot detected
Apr 13 08:25:07 router kern.emerg kernel: [ 0.260000] bootloader size = 20000
Apr 13 08:25:07 router kern.emerg kernel: [ 0.270000]
Apr 13 08:25:07 router kern.emerg kernel: [ 0.270000] found squashfs at 102000
Apr 13 08:25:07 router kern.notice kernel: [ 0.270000] Creating 8 MTD partitions on "ar7100-nor0":
Apr 13 08:25:07 router kern.notice kernel: [ 0.280000] 0x000000000000-0x000000020000 : "RedBoot"
Apr 13 08:25:07 router kern.notice kernel: [ 0.290000] 0x000000020000-0x0000007e0000 : "linux"
Apr 13 08:25:07 router kern.notice kernel: [ 0.290000] 0x000000102000-0x0000007b0000 : "rootfs"
Apr 13 08:25:07 router kern.warn kernel: [ 0.300000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Apr 13 08:25:07 router kern.notice kernel: [ 0.310000] mtd: partition "rootfs" set to be root filesystem
Apr 13 08:25:07 router kern.notice kernel: [ 0.320000] 0x0000007b0000-0x0000007e0000 : "ddwrt"
Apr 13 08:25:07 router kern.notice kernel: [ 0.320000] 0x0000007e0000-0x0000007f0000 : "nvram"
Apr 13 08:25:07 router kern.notice kernel: [ 0.330000] 0x0000007f0000-0x000000800000 : "FIS directory"
Apr 13 08:25:07 router kern.notice kernel: [ 0.340000] 0x0000007f0000-0x000000800000 : "board_config"
Apr 13 08:25:07 router kern.notice kernel: [ 0.340000] 0x000000000000-0x000000800000 : "fullflash"
Apr 13 08:25:07 router kern.warn kernel: [ 0.350000] ->Oops: flash id 0x10216 .
Apr 13 08:25:07 router kern.info kernel: [ 0.360000] tun: Universal TUN/TAP device driver, 1.6
Apr 13 08:25:07 router kern.info kernel: [ 0.360000] tun: (C) 1999-2004 Max Krasnyansky
Apr 13 08:25:07 router kern.warn kernel: [ 0.370000] Found an RTL8366RB switch
Apr 13 08:25:07 router kern.notice kernel: [ 0.370000] Realtek RTL8366RB ethernet switch driver version 0.2.4
Apr 13 08:25:07 router kern.info kernel: [ 0.490000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Apr 13 08:25:07 router kern.info kernel: [ 0.490000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Apr 13 08:25:07 router kern.info kernel: [ 0.700000] libphy: rtl8366rb: probed
Apr 13 08:25:07 router kern.info kernel: [ 0.900000] PPP generic driver version 2.4.2
Apr 13 08:25:07 router kern.info kernel: [ 0.900000] PPP BSD Compression module registered
Apr 13 08:25:07 router kern.info kernel: [ 0.910000] PPP Deflate Compression module registered
Apr 13 08:25:07 router kern.info kernel: [ 0.910000] PPP MPPE Compression module registered
Apr 13 08:25:07 router kern.info kernel: [ 0.920000] NET: Registered protocol family 24
Apr 13 08:25:07 router kern.info kernel: [ 0.930000] u32 classifier
Apr 13 08:25:07 router kern.info kernel: [ 0.930000] Performance counters on
Apr 13 08:25:07 router kern.info kernel: [ 0.940000] input device check on
Apr 13 08:25:07 router kern.info kernel: [ 0.940000] Actions configured
Apr 13 08:25:07 router kern.info kernel: [ 0.940000] Netfilter messages via NETLINK v0.30.
Apr 13 08:25:07 router kern.info kernel: [ 0.950000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
Apr 13 08:25:07 router kern.warn kernel: [ 0.960000] nf_conntrack_rtsp v0.7 loading
Apr 13 08:25:07 router kern.warn kernel: [ 0.960000] nf_nat_rtsp v0.7 loading
Apr 13 08:25:07 router kern.info kernel: [ 0.960000] ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 13 08:25:07 router kern.info kernel: [ 0.970000] TCP: westwood registered
Apr 13 08:25:07 router kern.info kernel: [ 0.970000] TCP: hybla registered
Apr 13 08:25:07 router kern.info kernel: [ 0.980000] TCP: vegas registered
Apr 13 08:25:07 router kern.notice kernel: [ 0.980000] Bridge firewalling registered
Apr 13 08:25:07 router kern.info kernel: [ 0.990000] 8021q: 802.1Q VLAN Support v1.8
Apr 13 08:25:07 router kern.info kernel: [ 0.990000] searching for nvram
Apr 13 08:25:07 router kern.info kernel: [ 1.000000] nvram size = 0
Apr 13 08:25:07 router kern.info kernel: [ 1.030000] Atheros AR71xx hardware watchdog driver version 0.1.0
Apr 13 08:25:07 router kern.info kernel: [ 1.040000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
Apr 13 08:25:07 router kern.info kernel: [ 1.050000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Apr 13 08:25:07 router kern.info kernel: [ 1.060000] Freeing unused kernel memory: 172K (802d5000 - 80300000)
Apr 13 08:25:07 router kern.debug kernel: [ 3.630000] ar71xx-wdt: enabling watchdog timer
Apr 13 08:25:07 router kern.info kernel: [ 4.070000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Apr 13 08:25:07 router kern.debug kernel: [ 4.370000] ar71xx: pll_reg 0xb8050014: 0x1a000000
Apr 13 08:25:07 router kern.info kernel: [ 4.370000] eth0: link up (1000Mbps/Full duplex)
Apr 13 08:25:07 router kern.info kernel: [ 4.600000] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Apr 13 08:25:07 router kern.info kernel: [ 4.610000] Backport generated by backports.git backports-20160324-13-g24da7d3c
Apr 13 08:25:07 router kern.debug kernel: [ 5.430000] ath: EEPROM regdomain: 0x0
Apr 13 08:25:07 router kern.debug kernel: [ 5.430000] ath: EEPROM indicates default country code should be used
Apr 13 08:25:07 router kern.debug kernel: [ 5.430000] ath: doing EEPROM country->regdmn map search
Apr 13 08:25:07 router user.debug : ttraff: data collection started
Apr 13 08:25:07 router kern.debug kernel: [ 5.430000] ath: country maps to regdmn code: 0x3a
Apr 13 08:25:07 router kern.debug kernel: [ 5.430000] ath: Country alpha2 being used: US
Apr 13 08:25:07 router kern.debug kernel: [ 5.430000] ath: Regpair used: 0x3a
Apr 13 08:25:07 router kern.debug kernel: [ 5.480000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Apr 13 08:25:07 router kern.info kernel: [ 5.490000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Apr 13 08:25:07 router kern.info kernel: [ 8.180000] device br0 entered promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 8.240000] device vlan1 entered promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 8.240000] device eth0 entered promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 8.250000] br0: port 1(vlan1) entered forwarding state
Apr 13 08:25:07 router kern.info kernel: [ 8.250000] br0: port 1(vlan1) entered forwarding state
Apr 13 08:25:07 router kern.info kernel: [ 8.260000] device br0 left promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 8.270000] device br0 entered promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 8.310000] device br0 left promiscuous mode
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: EEPROM regdomain: 0x8348
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: EEPROM indicates we should expect a country code
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: doing EEPROM country->regdmn map search
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: country maps to regdmn code: 0x3a
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: Country alpha2 being used: US
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: Regpair used: 0x3a
Apr 13 08:25:07 router kern.debug kernel: [ 8.380000] ath: regdomain 0x8348 dynamically updated by user
Apr 13 08:25:07 router kern.info kernel: [ 9.680000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Apr 13 08:25:07 router kern.info kernel: [ 10.250000] br0: port 1(vlan1) entered forwarding state
Apr 13 08:25:07 router kern.info kernel: [ 13.250000] device ath0 entered promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 13.930000] br0: port 2(ath0) entered forwarding state
Apr 13 08:25:07 router kern.info kernel: [ 13.930000] br0: port 2(ath0) entered forwarding state
Apr 13 08:25:07 router kern.info kernel: [ 14.860000] device vlan2 entered promiscuous mode
Apr 13 08:25:07 router kern.info kernel: [ 15.930000] br0: port 2(ath0) entered forwarding state
Apr 13 08:25:07 router kern.info kernel: [ 17.590000] device vlan2 left promiscuous mode
Apr 13 08:25:08 router user.info : pptpd : pptp daemon successfully started
Apr 13 08:25:08 router daemon.debug pptpd[7178]: CTRL: BCrelay incoming interface is br0
Apr 13 08:25:08 router daemon.debug pptpd[7179]: CTRL (BCrelay Launcher): Launching BCrelay with pid 0
Apr 13 08:25:08 router daemon.debug pptpd[7179]: MGR: BCrelay outgoing interface is regexp ppp[0-9].*
Apr 13 08:25:08 router daemon.info bcrelay[7179]: Running as child
Apr 13 08:25:08 router daemon.info pptpd[7178]: MGR: Manager process started
Apr 13 08:25:08 router daemon.info pptpd[7178]: MGR: Maximum of 10 connections available
Apr 13 08:25:08 router user.info : vpn modules : vpn modules successfully unloaded
Apr 13 08:25:08 router user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Apr 13 08:25:08 router user.info : vpn modules : nf_nat_proto_gre successfully loaded
Apr 13 08:25:09 router user.info : vpn modules : nf_conntrack_pptp successfully loaded
Apr 13 08:25:09 router user.info : vpn modules : nf_nat_pptp successfully loaded
Apr 13 08:25:09 router user.info : klogd : kernel log daemon successfully stopped
Apr 13 08:25:09 router kern.notice kernel: klogd: exiting
Apr 13 08:25:09 router user.info : syslogd : syslog daemon successfully stopped
Apr 13 10:25:09 router syslog.info syslogd exiting
Apr 13 10:25:09 router syslog.info syslogd started: BusyBox v1.26.2
Apr 13 08:25:09 router user.info : klogd : klog daemon successfully started
Apr 13 08:25:09 router kern.notice kernel: klogd started: BusyBox v1.26.2 (2017-04-06 01:59:49 CEST)
Apr 13 08:26:00 router user.info : dnsmasq : dnsmasq daemon successfully started
Apr 13 08:28:00 router user.info : dnsmasq : dnsmasq daemon successfully started
Apr 13 08:35:39 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 WPA: group key handshake completed (RSN)
Apr 13 08:44:00 router user.info : dnsmasq : dnsmasq daemon successfully started
Apr 13 09:00:35 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: authenticated
Apr 13 09:00:35 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: associated (aid 1)
Apr 13 09:00:35 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 RADIUS: starting accounting session 00000008-00000005
Apr 13 09:00:35 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 WPA: pairwise key handshake completed (RSN)
Apr 13 09:00:49 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: authenticated
Apr 13 09:00:49 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: associated (aid 1)
Apr 13 09:00:49 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 RADIUS: starting accounting session 00000008-00000005
Apr 13 09:00:49 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 WPA: pairwise key handshake completed (RSN)
Apr 13 09:01:10 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: authenticated
Apr 13 09:01:10 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: associated (aid 1)
Apr 13 09:01:10 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 RADIUS: starting accounting session 00000008-00000005
Apr 13 09:01:10 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 WPA: pairwise key handshake completed (RSN)
Apr 13 09:01:13 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: authenticated
Apr 13 09:01:13 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: associated (aid 1)
Apr 13 09:01:13 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 RADIUS: starting accounting session 00000008-00000005
Apr 13 09:01:13 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 WPA: pairwise key handshake completed (RSN)
Apr 13 09:01:26 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: authenticated
Apr 13 09:01:26 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 IEEE 802.11: associated (aid 1)
Apr 13 09:01:26 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 RADIUS: starting accounting session 00000008-00000005
Apr 13 09:01:26 router daemon.info hostapd: ath0: STA 00:24:d7:7f:c0:40 WPA: pairwise key handshake completed (RSN)
Apr 13 09:15:50 router daemon.info hostapd: ath0: STA 00:e1:b0:53:06:69 IEEE 802.11: authenticated
Apr 13 09:15:50 router daemon.info hostapd: ath0: STA 00:e1:b0:53:06:69 IEEE 802.11: associated (aid 2)
Apr 13 09:15:50 router daemon.info hostapd: ath0: STA 00:e1:b0:53:06:69 RADIUS: starting accounting session 00000008-00000006
Apr 13 09:15:50 router daemon.info hostapd: ath0: STA 00:e1:b0:53:06:69 WPA: pairwise key handshake completed (RSN)
Apr 13 09:16:00 router user.info : dnsmasq : dnsmasq daemon successfully started
Apr 13 09:18:00 router user.info : dnsmasq : dnsmasq daemon successfully started
mysticx
DD-WRT Novice


Joined: 26 Feb 2017
Posts: 3

PostPosted: Thu Apr 13, 2017 19:06    Post subject: Reply with quote
Router: TPLINK ARCHER-C7 v2 (International)
Firmware: DD-WRT v3.0-r31825 std (upgraded from 31791)
Kernel Version: Linux DD-WRT 3.18.48 #3080 Thu Apr 6 02:33:37 CEST 2017 mips
Status: OK
Reset: No
Errors: No
fingerslip
DD-WRT User


Joined: 23 Feb 2012
Posts: 70

PostPosted: Thu Apr 13, 2017 19:15    Post subject: Re: New build: DD-WRT v3.0 --- 31825 --- 2017/04/06 Reply with quote
Router: TPLINK ARCHER-C7 v2
Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Kernel: Linux 3.18.48 #3080 Thu Apr 6 02:33:37 CEST 2017 mips
Status: OK
Reset: NO
Errors: NO


Router: Buffalo WZR-HP-AG300H
Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Kernel: Linux 3.10.105 #30824 Thu Apr 6 00:44:40 CEST 2017 mips
Status: OK
Reset: NO
Errors: NO

_________________
Router Model: Buffalo WZR-HP-AG300H
vinumoses
DD-WRT Novice


Joined: 24 Mar 2012
Posts: 15

PostPosted: Tue Apr 18, 2017 3:11    Post subject: Reply with quote
Router: Buffalo WZR-HP-AG300H
Kernel: 3.10.105
Status: OK
Reset: no
Errors: yes

USB storage does not mount.

Ext3 and Ext4 formatted USB disks don't seem to be recognised or supported. The ext3.ko and ext4.ko modules seem to be missing in the modules directory.
nerdknight
DD-WRT Novice


Joined: 20 Apr 2017
Posts: 1

PostPosted: Thu Apr 20, 2017 1:34    Post subject: Reply with quote
Router: TP-Link TL-WR1043ND
Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Kernel: 3.10.105
Status: OK
Reset: no
Errors: yes

Ext4 file systems doesn't mount.
On Services->USB says "/dev/sda1 mounted to /tmp/mnt/sda1", but there is nothing there.
dmesg output:
Code:
<6>[13816.100000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[13816.140000] scsi8 : usb-storage 1-1:1.0
<5>[13817.140000] scsi 8:0:0:0: Direct-Access     WD       My Passport 0820 1007 PQ: 0 ANSI: 6
<5>[13817.150000] scsi 8:0:0:1: Enclosure         WD       SES Device       1007 PQ: 0 ANSI: 6
<5>[13817.160000] sd 8:0:0:0: [sda] Spinning up disk...
<4>[13818.180000] ......ready
<5>[13823.230000] sd 8:0:0:0: [sda] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
<5>[13823.240000] sd 8:0:0:0: [sda] Write Protect is off
<7>[13823.240000] sd 8:0:0:0: [sda] Mode Sense: 47 00 10 08
<3>[13823.240000] sd 8:0:0:0: [sda] No Caching mode page found
<3>[13823.250000] sd 8:0:0:0: [sda] Assuming drive cache: write through
<3>[13823.260000] sd 8:0:0:0: [sda] No Caching mode page found
<3>[13823.260000] sd 8:0:0:0: [sda] Assuming drive cache: write through
<6>[13823.330000]  sda: sda1
<3>[13823.340000] sd 8:0:0:0: [sda] No Caching mode page found
<3>[13823.340000] sd 8:0:0:0: [sda] Assuming drive cache: write through
<5>[13823.350000] sd 8:0:0:0: [sda] Attached SCSI disk
<4>[13824.920000] JBD2: Unrecognised features on journal
<3>[13824.930000] EXT4-fs (sda1): error loading journal
<3>[13824.940000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
<3>[13824.950000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
<4>[13825.080000] JBD2: Unrecognised features on journal
<3>[13825.080000] EXT4-fs (sda1): error loading journal
<4>[13827.750000] nf_conntrack: expectation table full
<4>[13829.780000] nf_conntrack: expectation table full
<4>[13829.790000] nf_conntrack: expectation table full
<4>[13831.820000] nf_conntrack: expectation table full

I tried with an usb stick formatted in ext4 and doesn't mount either, I tried it in ext3 and btrfs and both mounts ok.
sl33ch
DD-WRT Novice


Joined: 29 Mar 2013
Posts: 4

PostPosted: Fri Apr 21, 2017 6:06    Post subject: Reply with quote
Router: Netgear WNDR3800
Version Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Version Kernel: Linux 3.10.105 #30904 Thu Apr 6 02:51:57 CEST 2017 mips
Status: OK
Reset: No
Errors: None so far, however I noticed my router CPU usage is around 69% (it is running OpenVPN, so this could be the reason why.)

Router: Netgear WNDR3700 V4
Version Firmware: DD-WRT v3.0-r31825 std (04/06/17)
Version Kernel: Linux 3.18.48 #3094 Thu Apr 6 02:55:00 CEST 2017 mips
Status: OK
Reset: No
Errors: None so far
cduran1983
DD-WRT Novice


Joined: 15 Jul 2014
Posts: 5

PostPosted: Fri Apr 21, 2017 16:34    Post subject: Reply with quote
Here is my current Router Information

Quote:

Router: WZR-HP-G300NH v1
Firmware: DD-WRT v24SP2-MULTI (07/15/12) std - build 19484
Kernel: Linux buffalo 3.3.8 #1382 Sun Jul 15 17:28:16 CEST 2012 mips GNU/Linux

CPU
CPU Model Atheros AR9132 rev 2 (0xb9)
CPU Clock 400 MHz


Now I Just un-dust this one out of a box in the basement.

Was hopping to upgrade to the latest, but I see there are issues with Webupgrade. Just TFTP work on this device.
I want to help the developers getting this issue solved.
How can I test the upgrade and log everything in the process, and see whats going on?
And report back with some useful information perhaps.

Thanks.
bdg2
DD-WRT User


Joined: 18 Apr 2013
Posts: 191

PostPosted: Mon Apr 24, 2017 2:12    Post subject: Reply with quote
Why do recent builds keep changing my choice of 5GHz channel on my WNDR3700v2 from 44+48 to 48+44 after the router has been powered up a few hours?

(It still shows 44+48 in the settings but status shows 48+44 and that does seem to be what it's doing)

(If I choose 36+40 it seems to stay properly as 36+40)
Goto page Previous  1, 2, 3  Next Display posts from previous:    Page 2 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum