IPv6 on WRT54GL with VoIP build

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
View previous topic :: View next topic  
Author Message
MickeyKnox
DD-WRT Novice


Joined: 24 Apr 2017
Posts: 3
PostPosted: Mon Apr 24, 2017 11:45    Post subject: IPv6 on WRT54GL with VoIP build Reply with quote
I have a Linksys WRT54GL router with the firmware VoIP Generic v24 preSP2 [Beta] Build 14896 from 2010-08-09 installed. The router is not directly connected to the internet, but to another router which serves IPv6 addresses. My WRT54GL however does not announce IPv6 addresses. IPv6 is enabled in Administration->Management; and so is radvd. The radvd configuration snippet from the wiki is also copied to the appropriate field:

interface br0 {
AdvSendAdvert on;
prefix 0:0:0:1::/64 {
AdvOnLink on;
AdvAutonomous on;
};
};

However, my devices connected to this router don't get an IPv6 address. What else do I have to do in order to get IPv6 addresses?
Back to top View user's profile Send private message
Sponsor
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2670
Location: Indy
PostPosted: Mon Apr 24, 2017 15:21    Post subject: Re: IPv6 on WRT54GL with VoIP build Reply with quote
MickeyKnox wrote:
I have a Linksys WRT54GL router with the firmware VoIP Generic v24 preSP2 [Beta] Build 14896 from 2010-08-09 installed.
First, don't use that build, as noted in the Peacock announcement. Smile 14929 is generally the go-to, but for IPv6 you will likely need a much newer build. I'm using the 31825 VoIP builds on a GL v1.1 and GS v6, but have not tried IPv6 as they are used by my in-laws. Have you searched for (general) IPv6 setup threads; there are many. Old 2.4 kernel builds probably have some limitations though. Or hopefully others have tried it on a WRT...
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Back to top View user's profile Send private message
MickeyKnox
DD-WRT Novice


Joined: 24 Apr 2017
Posts: 3
PostPosted: Wed May 03, 2017 12:02    Post subject: Reply with quote
I finally came around to install the suggested firmware 14929. Unfortunately, that didn't gave me IPv6 either.

Quote:
but for IPv6 you will likely need a much newer build


Does that mean that the web interface is ahead of the actual capabilities of the firmware?
Back to top View user's profile Send private message
MickeyKnox
DD-WRT Novice


Joined: 24 Apr 2017
Posts: 3
PostPosted: Mon Jul 17, 2017 13:33    Post subject: Reply with quote
And now I've installed version 31825, but still no IPv6. Under Administration->Management there isn't even the option to enable IPv6 anymore.

Is there anybody who ever tried using IPv6 with dd-wrt?
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum