Posted: Wed Sep 05, 2007 20:12 Post subject: HOW TO CONNECT 2 DD-WRT ROUTERS WITH 2 WAN'S AND MANAGING ??
I HAVE 2 DIFFERENT DD-WRT V24RC1 ROUTERS WITH DIFFERENT INTERENT CABLE MODEMS. THEY ARE WORKING LIKE :
1- CHANNEL 1 AND ADDR 192.168.1.1 WITH DHCP ON
2- CHANNEL 2 AND ADDR 192.168.2.1 WITH DHCP ON
I'M CONNECTED TO 192.168.1.1 VIA LAN.
I'M TAKING INTERNET FROM THAT ONE.
I WANNA CONNECT TO 192.168.2.1 AND JUST SEE THE CONDITION OF THE ROUTER.
I HAVE TRIED WITH EARLIER VERSIONS OF DD-WRT WITH POINT TO POINT WDS. AND I DON'T REMEMBER HOW, SUCCEEDED...
BUT NOW, I CANNOT DO THAT ANYMORE. WHEN I WILL SET THEM TO LAN WDS, DHCP'S ARE SOMETIMES MIXED, AND I DONT LIKE THAT.
-LIKE, IF IT IS LAN WDS AND I CONNECT VIA DHCP TO 192.168.1.1 IT GIVES ME 192.168.2.100 ADDRESS..
SO I NEED A SOLLUTION, HOW TO CONTROL THE OTHER ROUTER WITHOUT MIXING DHCP'S ONE WITH ANOTHER. (TO CONNECT TO 192.168.1.1 WITH MINE IP LIKE 192.168.2.10 AND WIA POINT TO POINT WDS TO MANAGE 192.168.2.1)
Joined: 06 Jun 2006 Posts: 3763 Location: I'm the one on the plate.
Posted: Thu Sep 06, 2007 6:54 Post subject:
You cannot leave both DHCP servers active and expect one of them not to work. One must be turned off. Take your pick. _________________ http://69.175.13.131:8015 Streaming Week-End Disco. Station Ripper V 1.1 will do.
Two separate networks one in range of another.
I wanna connect to router 2 and manage it. (its to far away just to connect on him!!!)
Now, I can manage only router1.
How to make this work?,(still 2 networks to be separated).
I know you could use some IPTABLES rules / script to achieve this, but I don't know what exactly... I did try something here, but with my 'scripting' skills it was hopeless effort.
Basically we'd need to block all traffic between these 2 networks, but allowing access to GUI... I think that is even pretty basic IPTABLES script, but as said, I am hopeless with this..