karak DD-WRT Novice
Joined: 01 Apr 2016 Posts: 2 Location: Aurora, CO
|
Posted: Sat Jun 17, 2017 17:41 Post subject: OpenVPN starts and runs, but doesn't appear to bind? |
|
Router: WRT1200AC v2
Firmware: DD-WRT v3.0-r31722 std (03/21/17)
You can see openvpn running with a process search: Code: |
root@gateway:/etc# ps | grep openvpn
3945 root 1084 S grep openvpn
21943 root 3076 S openvpn --config /tmp/openvpn/openvpn.conf --up /tmp/openvpn/route-up.sh --down /tmp/openvpn/route-down.sh --daemon --script-security 2
|
The status > OpenVPN page in my dd-wrt router doesn't show anything either, in the state panel, nothing for server, remote ip, or local ip. The status panel has the headers but nothing where the data should be. I really would like to get this running so any help would be greatly appreciated. See attached syslog text file for OpenVPN syslog messages.
Add'l VPN config: Code: |
push "route 10.0.0.1 255.255.255.0"
server 10.8.0.0 255.255.255.0
dev tun0
proto tcp
keepalive 10 120
dh /tmp/openvpn/dh.pem
ca /tmp/openvpn/ca.crt
cert /tmp/openvpn/cert.pem
key /tmp/openvpn/key.pem
management localhost 5001 |
_________________ WRT1200AC
DD-WRT v3.0-r28788 std (01/13/16) |
|