Joined: 30 Jun 2008 Posts: 825 Location: near Toronto, Canada
Posted: Fri Feb 04, 2011 20:35 Post subject: NoCatSplash and jffs on a WRT54GL?
I've been tinkering with NoCatSplash on a WRT54GL running Eko's svn15230 std-nokaid.
NoCatSplash itself seems to be working, but I want to creat a small customized "splash.html".
I seem to be stuck with JFFS, and am not sure if I am doing something wrong, or just simply running up against a memory space limitation.
My status page reports JFFS space 128.00KB/0, presumably indicating zero available space.
Is there anything I can do to increase the amount of memory available to JFFS?
Any other sugegstions for how I might be able to make NoCatSplash work on a WRT54GL with a reasonably current version of dd-wrt? _________________ WRT54G-RG
WRT54G-TM
WRT54GL v1.1
WRT54G v6, v8
WRT54GS v5
WRH54G
Joined: 30 Jun 2008 Posts: 825 Location: near Toronto, Canada
Posted: Fri Feb 04, 2011 22:05 Post subject:
I may have found a solution.... testing an Eko "mini-hotspot-kaid" svn15230 build now. _________________ WRT54G-RG
WRT54G-TM
WRT54GL v1.1
WRT54G v6, v8
WRT54GS v5
WRH54G
Joined: 30 Jun 2008 Posts: 825 Location: near Toronto, Canada
Posted: Fri Feb 04, 2011 23:08 Post subject:
Well... Eko's "mini-hotspot-kaid" build appears to have resolved my issue.
Jffs space is now reported as 448.00KB / 124.00 KB, with a couple of K bytes devoted to NoCatSplash files copied to the jffs space.
Unfortunately, this build gives up https support... I would gladly sacrifice Kaid to get that back if possible.
FWIW, I find it curious that NoCatSplash apparently needs the WAN interface connection type to be "Automatic Configuration - DHCP" in order to function. I don't understand why it couldn't also work with a PPPoE or Static IP interface. _________________ WRT54G-RG
WRT54G-TM
WRT54GL v1.1
WRT54G v6, v8
WRT54GS v5
WRH54G
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Sat Feb 05, 2011 6:35 Post subject:
hpsenicka wrote:
Well... Eko's "mini-hotspot-kaid" build appears to have resolved my issue.
Jffs space is now reported as 448.00KB / 124.00 KB, with a couple of K bytes devoted to NoCatSplash files copied to the jffs space.
Unfortunately, this build gives up https support... I would gladly sacrifice Kaid to get that back if possible.
FWIW, I find it curious that NoCatSplash apparently needs the WAN interface connection type to be "Automatic Configuration - DHCP" in order to function. I don't understand why it couldn't also work with a PPPoE or Static IP interface.
No, https is still there in the mini-hotspot-kaid, if you turn off http in administration, then reboot the unit, when you go to re-access the gui, try from https:// it should be there, its hidden, shhhh :)
Where can I find/download Eko's "mini-hotspot-kaid" build that you folks referred to? I also need to use NoCatSplash on a WRT54GL. I've been using DD-WRT for years but I haven't been able to find the build you referred to. Any help is appreciated!
I'm going to test it out tonight as well. I'm looking to not have to setup a SMB share/startup scripts to point my access points to server storage. It'd be nice to just keep the page right on the router.
The download link seems to be dead and i tried to browse over the download and i couldn't find this one..
I have wrr54g v2.2 and somehow i need to flash it a firmware that has a nocatsplash with fewer a availble space to modift the splash page.. Any advice would be great..
