Posted: Tue Jun 06, 2017 17:31 Post subject: tp link wr941 v3.2 bricked with latest beta ddwrt fw
i bought wr941 3.2 downloaded factory to ddwrt from official site and that was good,later i was attending to install latest beta for my 941 3.2 v from 5.30 released and than all four lan leds flash and reboot constantly.
how do i manage to unbrick i dont have good expirience with tplink routers,what are steps tools and procedures and what is fw i need to upload?
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Tue Jun 06, 2017 21:28 Post subject:
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
use this recovery striped file: http://www.dd-wrt.com/phpBB2/download.php?id=17664 _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Thu Jun 08, 2017 18:44 Post subject: not so sure what i do
Alozaros wrote:
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
i do that but still keep blinking leds ,what is lock led? is that qss? or all leds blink second,is any video tutorial so i can follow steps,i downloaded open tftp Open TFTP Server MultiThreaded Version 1.64 Windows Built 2001 i put in directory where is installation files of that i think that is root directory
Posted: Sat Jun 10, 2017 16:07 Post subject: Re: not so sure what i do
slowmotionscene wrote:
Alozaros wrote:
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
i do that but still keep blinking leds ,what is lock led? is that qss? or all leds blink second,is any video tutorial so i can follow steps,i downloaded open tftp Open TFTP Server MultiThreaded Version 1.64 Windows Built 2001 i put in directory where is installation files of that i think that is root directory
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
these instructions are good thank you but partly i was know most of that just wasnt remember what to do,i maked with ctrl+c but i wasnt know commands then well hope i did and second time i cant now my ttl is broken until i get new i cant clearly say anything
these instructions are good thank you but partly i was know most of that just wasnt remember what to do,i maked with ctrl+c but i wasnt know commands then well hope i did and second time i cant now my ttl is broken until i get new i cant clearly say anything
these instructions are good thank you but partly i was know most of that just wasnt remember what to do,i maked with ctrl+c but i wasnt know commands then well hope i did and second time i cant now my ttl is broken until i get new i cant clearly say anything
Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv3_tp_recovery.bin
Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Sat Jul 29, 2017 16:46 Post subject:
for best results with TFTP make sure you use win 7 and disable firewall or antivirus software...
if reset button doesnt work try with WPS button or try WAN port instead of LAN sometimes they switch those procedures on different router models....
in general TFTP all instructions for TP-LINk routers are quite similar, you can also try different TFTP servers instead.... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
