[itachi_br]

I'm another user that was fooled by the lack of attention to update the "suported device list" to tell that actually WR940N-v3 IS NOT SUPPORTED...

Today i went to store to bought 4 routers for two uncles, found that model with good price, and bought. Picked up one and had flash DD-WRT and than.... no LAN, no WAN.

I discovered after that seems like the LAN ports turned to be a "WAN Switch", as i plugged the main router on LAN1, a notebook on LAN4, and the internet LED turned to be blue (internet access) and the notebook too with internet, but with the IP from master router.

Is possible to turn one of the LAN into a WAN, and use the another 3 LANs as LAN? (Until DD-WRT correct this bug?)

I use webrevert to return to stock firmware, but with 3 LAN we can work fine until a final solution..

[PekaFat]

  

[itachi_br]

I don't know if the new firmware fixed the bug..

But the last version i used on Apr 06 didn't work.

The firmware turned my 4 LAN onto 4 WAN... if i disable WAN, i have 4 LAN again.

To use as a AP only, could work, but to use as router+AP, don't.

[khaivq]

Version 07-08-2017-r32597 still doesn't work

I have to revert to stock firmware

[plazma]

I just picked up one of these to replace a faulty router.

First time i flashed the firmware over tftp i thought i had bricked it due to the LED turning red/purple... eventually i realised it had flashed and discovered the issue (which i like others had not seen previously) regarding the wan bug.

However i did find a post where someone had said openwrt worked... i assumed it would have the same bug, however using the bin from here:
https://lede-project.org/toh/hwdata/tp-link/tp-link_tl-wr940n_v3

The router flashed fine and everything works as expected, even the leds now work properly...

So anyone having the issue consider openwrt for the short term, however considering it works under openwrt without issue, surely the issues can be fixed with dd-wrt as well.

Does anyone have an idea of who original created the patches to so the v3 worked with dd-wrt as i would much prefer to see the router work with dd-wrt instead, who is good to contact about this? Does anyone know?

[jonhsos]

Hi guys I would like to put dd-wrt on my WR940N version firmware V6 to use vpn on my router, can you guys help me?I look for this version but I can't finding it. I just only get the version V3 on ftp://ftp.dd-wrt.com/betas/2017/11-16-2017-r33772/, If I put this version on it will be ok or may I bricked him?

My router is from brazil,I need get version from my country too?

If you guys don't understand me, sorry but It's because my english it's not good enough!

I work alot to fix a problem with traffic shaping on my connection and what I see on the the web sites is to put vpn on my router, but there is a problem i can't finding this version 6 to use on TP-LINK WR940N V6

Regards

[kenzyn]

HAve anyone tried this new version of dd-wrt firmware for WN940N v3 here:
ftp://ftp.dd-wrt.com/betas/2018/08-30-2018-r36808/tplink_tl-wr940ndv3/

I've check the md5 hash of this version and 2016's version, they do not have the same hash. That means something was edited in the .bin file (i'm not sure which was edited).

[ian5142]

A lot more than the hash has changed: https://svn.dd-wrt.com/

[kenzyn]

hello guys, I did try the newest dd-wrt firmware for WR940N v3.
The good news is
Everything is ok, WAN port works, LAN ports work perfectly

The bad news is
This router does not allow user to 'overclock tx power', default setting is 20dBm

[Montegreen1]

[kenzyn]

[Montegreen1]

[Pavlitos80]

Hello guys,

Nice to find you.

A little help please.

I have flashed WR940V V3 with 37305 firmware im order to use the router with IP Vanish.

Unfortunately under the Services/VPN tab there is no option for OpenVpn.

What should I do?

Thank you in advance for your time