Help: USB drive showing as empty in DD-WRT

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
juliushibert
DD-WRT Novice


Joined: 18 Jul 2010
Posts: 44

PostPosted: Wed Aug 09, 2017 19:40    Post subject: Help: USB drive showing as empty in DD-WRT Reply with quote
I've upgraded to DD-WRT v3.0-r32170 std (06/01/17) recently.

Since upgrading my USB stick connected to my Buffalo WZR-HP-AG300H, is showing as empty when I `ls` via ssh. I've plugged the USB drive into another linux box and there's definitely files on the USB stick. I've attached the output of this command for reference at the end of this post.

I have Auto mounting set to enabled in the GUI>Services>USB and at the bottom of the page, Disk Info it shows the USB stick is mounted correctly.

Code:

--- /dev/sda1
Block device, size 1.396 GiB (1499300864 bytes)
Ext4 file system
Volume name "Data"
UUID 7513FB9D-6009-44F6-B341-08418D332164 (DCE, v4)
Volume size 1.396 GiB (1499299840 bytes, 366040 blocks of 4 KiB)
/dev/sda1 mounted to /tmp/mnt/sda1

--- /dev/sda2
Block device, size 476.6 MiB (499777536 bytes)
Ext3 file system
Volume name "System"
UUID 2B5BB510-06DA-44E4-B14E-5B0C9E6C3526 (DCE, v4)
Volume size 476.6 MiB (499777536 bytes, 488064 blocks of 1 KiB)
/dev/sda2 mounted to /tmp/mnt/sda2



Anyone know what's going wrong here? It used to work before I upgraded. I've been using the USB stick to add extra ipkg support.

_________________
Buffalo WZR-HP-AG300H: DD-WRT v3.0-r32170 std (06/01/17)
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum