If I understood correctly you are asking if you can flash your 5.1 with a build for a completely different router? No, you can't. All the info you need is on the supported devices table.
If I understood correctly you are asking if you can flash your 5.1 with a build for a completely different router? No, you can't. All the info you need is on the supported devices table.
oh i see ok thanks
Test build here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=172673&postdays=0&postorder=asc&start=27 _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
If I understood correctly you are asking if you can flash your 5.1 with a build for a completely different router? No, you can't. All the info you need is on the supported devices table.
ok am clear it will be 841build,does have others issues exepct third antena wont work,is it tested hope i wouldnt brick ,i wanna ask which third antenna wont work looked from backround where is ports and adapter hole left middle or right?
Posted: Tue Aug 15, 2017 15:26 Post subject: Middle antenna
The middle antenna on the 940n and 941nd is only used in the factory firmware. It does not equal higher speeds as the chip is only 2 transmit 2 receive. Dd-wrt does not use the middle antenna at all. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Posted: Tue Aug 15, 2017 15:48 Post subject: power output
The power output does not change it is a set limit by the hardware. I set dd-wrt to output 30 or 50 dbm but the actual will hit the hardware max. You can lower it if you want less range. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch