Your reports for Atheros units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors: _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Router Model: Linksys WRT-160NL
Status: Bricked
Reset: YES/NO - doesn't matter
Errors: Power LED blinking continuously and no IP is assigned to the PC. The reset button has no effect. Same as on version 33257.
Updated from: 33006
ath10k beamforming still only half works, qos netmask broken etc.. sigh... have new internet plan 150mbps down, exposes even MORE qos problems i didnt even bother creating a ticket for..cause clearly no one really cares about proper latency & bufferbloat control, certainly not BS.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Router: DIR-615 i1
Status: Good
Reset: Reset to defaults with flash procedure; erased NVRAM before and after flash
Errors: None
Router: TL-WDR3600 v. 1.5
Status: Buggy - Random Reboots
Reset: Reset to defaults with flash procedure; erased NVRAM before and after flash
Errors: Router is randomly rebooting. Flashed back to 33006, which is the last build for this router that doesn't cause random reboots.
Router:TL-WR743NDv2
Firmware:DD-WRT v3.0-r33342 std (09/09/17)
Kernel:Linux 3.10.107 #39795 Sat Sep 9 06:07:44 CEST 2017 mips
Status:ok
Reset:no no reset so far fo 2 hours running
Errors:no so far
Router:TL-WR1043 v1.4
Firmware:DD-WRT v3.0-r33342 std (09/09/17)
Kernel:Linux 3.10.107 #39785 Sat Sep 9 05:55:03 CEST 2017 mips
Status:ok
Reset:no reset so far fo 2 hours running
Errors:no so far
Router:TL 941 V3.5
Firmware:DD-WRT v3.0-r33342 std (09/09/17)
Kernel:Linux 3.10.107 #39787 Sat Sep 9 05:57:00 CEST 2017 mips
Status:ok
Reset:no reset so far fo 2 hours running
Errors:no so far
Router:TL 941 V3.6
Firmware:DD-WRT v3.0-r33342 std (09/09/17)
Kernel:Linux 3.10.107 #39787 Sat Sep 9 05:57:00 CEST 2017 mips
Status:ok
Reset:no reset so far fo 2 hours running
Errors:no so far
Router:TL 941 V3.2
Firmware:DD-WRT v3.0-r33342 std (09/09/17)
Kernel:Linux 3.10.107 #39787 Sat Sep 9 05:57:00 CEST 2017 mips
Status:ok
Reset:no reset so far fo 2 hours running
Errors:no so far
Router:TL-WA901NDv1
Firmware:DD-WRT v3.0-r33342 std (09/09/17)
Kernel:Linux 3.10.107 #39789 Sat Sep 9 05:59:46 CEST 2017 mips
Status:ok
Reset:no reset so far fo 2 hours running
Errors:no so far
ath10k beamforming still only half works, qos netmask broken etc.. sigh... have new internet plan 150mbps down, exposes even MORE qos problems i didnt even bother creating a ticket for..cause clearly no one really cares about proper latency & bufferbloat control, certainly not BS..
May I ask how you can be happy with the R7800? I've seen you say in other threads that it is a good device but I'm curious how you can feel this way when you continually point out that DD-WRT has a ton of issues on the device and nobody cares enough to address them.
Not being a jerk, really just curious how you can use a device that has so many issues for you. _________________ --Netgear R7800--
DD-WRT v3.0-r49492 std (07/14/22)
ath10k beamforming still only half works, qos netmask broken etc.. sigh... have new internet plan 150mbps down, exposes even MORE qos problems i didnt even bother creating a ticket for..cause clearly no one really cares about proper latency & bufferbloat control, certainly not BS..
May I ask how you can be happy with the R7800? I've seen you say in other threads that it is a good device but I'm curious how you can feel this way when you continually point out that DD-WRT has a ton of issues on the device and nobody cares enough to address them.
Not being a jerk, really just curious how you can use a device that has so many issues for you.
ath10k beamforming still only half works, qos netmask broken etc.. sigh... have new internet plan 150mbps down, exposes even MORE qos problems i didnt even bother creating a ticket for..cause clearly no one really cares about proper latency & bufferbloat control, certainly not BS..
May I ask how you can be happy with the R7800? I've seen you say in other threads that it is a good device but I'm curious how you can feel this way when you continually point out that DD-WRT has a ton of issues on the device and nobody cares enough to address them.
Not being a jerk, really just curious how you can use a device that has so many issues for you.
ath10k beamforming still only half works, qos netmask broken etc.. sigh... have new internet plan 150mbps down, exposes even MORE qos problems i didnt even bother creating a ticket for..cause clearly no one really cares about proper latency & bufferbloat control, certainly not BS..
May I ask how you can be happy with the R7800? I've seen you say in other threads that it is a good device but I'm curious how you can feel this way when you continually point out that DD-WRT has a ton of issues on the device and nobody cares enough to address them.
Not being a jerk, really just curious how you can use a device that has so many issues for you.
I use Kong FW on my R7800 .... rock solid! 👍🏻 Brainslayers builds are alittle risky for my taste lol! 😂
R7800 is rock solid when used lightly. tatsuya46 tried every existing version of ddwrt from BS and Kong, same result on all of them. _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
ath10k beamforming still only half works, qos netmask broken etc.. sigh... have new internet plan 150mbps down, exposes even MORE qos problems i didnt even bother creating a ticket for..cause clearly no one really cares about proper latency & bufferbloat control, certainly not BS..
May I ask how you can be happy with the R7800? I've seen you say in other threads that it is a good device but I'm curious how you can feel this way when you continually point out that DD-WRT has a ton of issues on the device and nobody cares enough to address them.
Not being a jerk, really just curious how you can use a device that has so many issues for you.
I use Kong FW on my R7800 .... rock solid! 👍🏻 Brainslayers builds are alittle risky for my taste lol! 😂
R7800 is rock solid when used lightly. tatsuya46 tried every existing version of ddwrt from BS and Kong, same result on all of them.
I'll get my coat! 😂
(I use mine as a bog-standard residential router for my virgin 350mb naturally I don't do anything complicated with it! 😉 I did notice the *unknown channel* bug when 5ghz HT160 is enabled after a reboot afew times!👊🏻
Posted: Sun Sep 10, 2017 19:55 Post subject: TP-WA901ND
Router: TP-WA901ND
Firmware: DD-WRT v3.0-r33342 std (09/09/17)
Kernel:
Status: Upgrade from TP stock formware
Reset: done manually before and after the upgrade
Errors: If trying to set the interface language in the Web UI to other than English, the radio (WiFi) is switched off. The device has to be reset with the 30/30/30 reset and to be re-configured again in order to get the radio working again.
Besides this, no other errors in operating this DD-WRT version.