Linksys Tri-Band EA9500 AC5400 Router Firmware

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Contributions Upload
Goto page Previous  1, 2, 3, 4
Author Message
mommyfixit
DD-WRT Novice


Joined: 12 Apr 2017
Posts: 2

PostPosted: Wed Apr 12, 2017 7:23    Post subject: Also hoping for DD-WRT for this router Reply with quote
I also have the EA9500. Please let me know if I can be of any assistance. I am studying networking and cybersecurity and wish I had bought one capable of SNMP, as I need to learn to use networking monitoring tools.
Sponsor
mommyfixit
DD-WRT Novice


Joined: 12 Apr 2017
Posts: 2

PostPosted: Wed Apr 12, 2017 10:04    Post subject: Donate toward router donation Reply with quote
There are several of us who want this on the EA9500. I read here that Brainslayer needs one donated in order to develop it. http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Linksys_.28a_division_of_Belkin_-_formerly_Cisco.29

Is there a way for us to come together to purchase one for development? I can't buy a whole new router, but I'm good for $50...
Cr0t
DD-WRT Novice


Joined: 04 Mar 2010
Posts: 11
Location: USA

PostPosted: Wed Apr 12, 2017 19:47    Post subject: Re: Donate toward router donation Reply with quote
mommyfixit wrote:
There are several of us who want this on the EA9500. I read here that Brainslayer needs one donated in order to develop it. http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Linksys_.28a_division_of_Belkin_-_formerly_Cisco.29

Is there a way for us to come together to purchase one for development? I can't buy a whole new router, but I'm good for $50...
I match your $50.
_________________
cya
    ©®0t
npcomplete
DD-WRT Novice


Joined: 26 Oct 2008
Posts: 14

PostPosted: Fri Apr 14, 2017 13:40    Post subject: Reply with quote
First time installation on this router is only possible via serial port.

If you are interested you can try my firmware https://forum.lede-project.org/t/build-for-linksys-ea9500/1817
t4thfavor
DD-WRT Novice


Joined: 01 Dec 2006
Posts: 33
Location: Michigan, USA

PostPosted: Tue May 09, 2017 12:29    Post subject: Reply with quote
http://computers.woot.com/offers/linksys-ea9500-ac5400-max-stream-wifi-router-2?ref=cp_cnt_wp_16_1


Now is your chance to get one of these on the cheap for development.

I came out of several years of hibernation to post this Smile
mtecc
DD-WRT Novice


Joined: 19 Jul 2017
Posts: 2

PostPosted: Wed Jul 19, 2017 19:39    Post subject: Serial Output Reply with quote
serial out put can be found here

http://www.snbforums.com/threads/ea9500-serial-console-to-cfe.35228/



Code:

Digital core power voltage set to 1.05V
Decompressing...done
Digital core power voltage set to 1.05V

CFE Boot Loader v0.5.1__7.14.131.35

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S30000217
00001770


RDLYW0 00000004

RDENW0 00000037

RDQSW0

0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
01 ------------++++++++++++++++++++++++++X++++++++++++++++++++++++-
02 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
03 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++--
04 ------++++++++++++++++++++++++X+++++++++++++++++++++++----------
05 ---------------++++++++++++++++++++++++X++++++++++++++++++++++--
06 -------++++++++++++++++++++++++X++++++++++++++++++++++++--------
07 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
08 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------
09 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
10 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
11 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
12 --++++++++++++++++++++++++++X++++++++++++++++++++++++++---------
13 -----+++++++++++++++++++++++X+++++++++++++++++++++++------------
14 ------+++++++++++++++++++++++++X+++++++++++++++++++++++++-------
15 --+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------


PW0

0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ---++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
01 ----++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-
02 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
03 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--
04 +++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
05 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--
06 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
07 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
08 +++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
09 +++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------
10 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-----
11 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
12 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
13 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
14 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
15 +++++++++++++++++++++++++++X++++++++++++++++++++++++++----------


NW0

0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
01 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
02 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
03 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
04 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
05 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
06 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++----
07 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
08 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++--------
09 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
10 -------+++++++++++++++++++++++++++X++++++++++++++++++++++++++---
11 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
12 ---+++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
13 -------++++++++++++++++++++++++X++++++++++++++++++++++++--------
14 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------
15 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++----------


WRDQW0

0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
01 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
02 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
03 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
04 ++++++++++++++++++++++++X++++++++++++++++++++++++---------------
05 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
06 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
07 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
08 +++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
09 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++-------+-
10 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
11 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
12 +++++++++++++++++++++++++X++++++++++++++++++++++++--------------
13 +++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
14 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
15 +++++++++++++++++++++++++X+++++++++++++++++++++++++-------------


WRDMW0 00000027
WRDMW0 00000025


ADDR

0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++++++S+++++++X++++++++++++++++++++++++++++++++

Decompressing...done
Found a Toshiba NAND flash:
Total size: 128MB
Block size: 128KB
Page Size: 2048B
OOB Size: 64B
Sector size: 512B
Spare size: 16B
ECC level: 8 (8-bit)
Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
find_devinfo: devinfo block found at 0x00180000!

Press Ctrl+C to stop in CFE


CFE version 7.14.131.35 (r612453) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Jan 22 18:07:59 CST 2016 (proc@ubuntu12d04LTS), for the EA9500 board
Copyright (C) 2000-2008 Broadcom Corporation.
Copyright (C) 2016 Arcadyan Corporation.

Flashing all LEDs ...

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1400,*800*

### RoboID=53012, vid=1 val32=0x35faf val16=0x1 ###

### RoboID=53012, vid=2 val32=0x22110 val16=0x2 ###
et2: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.35 (r612453)
CPU type 0x0: 1400MHz
Tot mem: 262144 KBytes

CFE mem: 0x00F00000 - 0x01799D2C (9018668)
Data: 0x00F601E0 - 0x00F608A8 (1736)
BSS: 0x00F608B8 - 0x00F97D2C (226420)
Heap: 0x00F97D2C - 0x01797D2C (8388608)
Stack: 0x01797D2C - 0x01799D2C (8192)
Text: 0x00F00000 - 0x00F52488 (337032)
Boot: 0x0179A000 - 0x017DA000
Reloc: I:00000000 - D:00000000

Boot version: v0.5.1__7.14.131.35

Device eth0: hwaddr 48-F8-B3-F6-49-51, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw, invalid tftp target filename (Smile!
Could not load :: Invalid parameter
Checking CRC validity of nflash1.trx ... OK
Booting(0): boot -raw -z -addr=0x8000 -max=0xef8000 nflash0.os:
Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ..... 5438272 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
cfe_start: launch kernel with blue LED0 is on!

console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
The first offset=200000, 2nd offset=1f00000
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x200000
nflash: squash filesystem with lzma found at block 33
lookup_nflash_rootfs_offset: offset = 0x1f00000
nflash: squash filesystem with lzma found at block 265
Creating 6 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000001f00000 : "linux"
0x00000042dba4-0x000001f00000 : "rootfs"
0x000001f00000-0x000005200000 : "linux2"
0x00000212db04-0x000005200000 : "rootfs2"
mtecc
DD-WRT Novice


Joined: 19 Jul 2017
Posts: 2

PostPosted: Wed Aug 02, 2017 5:27    Post subject: Firmware Reply with quote
https://serialize.wordpress.com/ has alot of info regarding firmware and install on EA9500. Also has firmware source:

Firmware Source:

http://downloads.linksys.com/downloads/gpl/EA9500_v1.1.7.177204.tar.gz

Hardware Info:
CPU Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
Switch in BCM4709C0KFEBG & BCM53125
RAM 256 MB
Flash 128 MB
2.4 GHz Radio BCM4366 4×4 2.4/5G single chip 802.11ac SoC
Skyworks SE2623L 2.4 GHz power amp (x4)
5 GHz radio BCM4366 4×4 2.4/5G single chip 802.11ac SoC
RFMD RFPA5542 5 GHz PA module (x4)
NOTE: There are two 5 GHz radios.
PCIe PLX Technology PEX8603 3-lane, 3-port PCIe switch

It appears that like Netgear R8000, Linksys EA9500 CPU is connected to CPU port 5. Additionally we have to add VLAN1 changes to accommodate this.

For b53_common.c, at around line 1385 add following:
1386
1387

if (of_machine_is_compatible("linksys,ea9500"))
sw_dev->cpu_port = 5;

Adding changes to Network Config (target/linux/bcm53xx/base_files/02_network):

wan_macaddr="$(nvram get wan_hwaddr)"
case "$board" in
asus,rt-ac87u)
ifname=eth1
etXmacaddr=$(nvram get et1macaddr)
;;
dlink,dir-885l | \
netgear,r7900 | \
netgear,r8000 | \
netgear,r8500 | \
linksys,ea9500) # add ea9500
ifname=eth2
etXmacaddr=$(nvram get et2macaddr)
;;
*)
ifname=eth0
etXmacaddr=$(nvram get et0macaddr)
;;
esac

# If WAN MAC isn't explicitly set, calculate it using base MAC as reference.
[ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add "$etXmacaddr" 1)

# Workaround for devices using eth2 connected to (CPU) switch port 8
case "$board" in
dlink,dir-885l | \
netgear,r7900 | \
netgear,r8000 | \
netgear,r8500 | \
linksys,ea9500) # add ea9500
ifname=eth0
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"

# These devices should use eth2 so their eth0 interface often has no MAC
# assigned. Manually assign eth2's MAC to the LAN.
et2macaddr="$(nvram get et2macaddr)"
[ -n "$et2macaddr" ] && ucidef_set_interface_macaddr "lan" "$et2macaddr"
[ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr "wan" "$wan_macaddr"

board_config_flush
exit 0
;;
esac
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 171

PostPosted: Sun Sep 10, 2017 1:57    Post subject: Reply with quote
Some light on the horizon:

http://svn.dd-wrt.com/changeset/33335
http://svn.dd-wrt.com/changeset/33336

_________________

Linksys EA8500 33010M kongat || D-Link DIR-890L A1 - 33010M kongac
D-Link DIR-885L A1 - 33010M kongac || D-Link DIR-895L - BS 30805 (LAN/WAN ports not working)
R6300v2 - 29440M (client bridge) || Netgear EX6200 - 31575M (client bridge)
WRT54GS v1.1 - 26866 v24 std generic || WRT54G v2 - 14929 mini
Goto page Previous  1, 2, 3, 4 Display posts from previous:    Page 4 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Contributions Upload All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum