D-LINK DIR-860L B1 router

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3, 4
Author Message
Huck
DD-WRT Novice


Joined: 06 Apr 2017
Posts: 9

PostPosted: Wed Aug 09, 2017 1:44    Post subject: Reply with quote
If I remember correctly its just ssh/telnet in and
lan_eeprom_mac XX:XX:XX:XX:XX:XX
wan_eeprom_mac XX:XX:XX:XX:XX:XX
radio2_eeprom_mac XX:XX:XX:XX:XX:XX
radio5_eeprom_mac XX:XX:XX:XX:XX:XX (click enter)

x= your mac address's so write those down first before loading firmwares.

If there are any shared mac's i just followed the sequence. if lan mac ended in say B then wan would end with c radio2 with d radio5 with e. Fairly simple and have had no issues.
Sponsor
Pr0xiMUS
DD-WRT Novice


Joined: 07 Jul 2006
Posts: 14

PostPosted: Wed Sep 13, 2017 20:21    Post subject: Reply with quote
radmir is updating his build so you should look for latest image @ https://yadi.sk/d/6ttXcerpJ2hg3/DIR860LB1



whackamole wrote:
Pr0xiMUS wrote:
Really have to thank @radmir for preparing padavan firmware for our d-link dir-860L B1! Router is now really really fast and 5Ghz WIFI is working as expected. Finally stable and capable software for this mighty device. I couldn't install padavan fw from dd-wrt so I recommend to use LADE (ex OpenWRT) as you can see below in the post.

I've packaged required files and uploaded them here:
Code:
https://mega.nz/#!FxcRzK6D!UxFExlWphPZJb4y5w1NGxHE2G3lmEL4k4vKQmbutaI8


1. Revert to stock D-LINK firmware via recovery firmware upgrade page

2. From stock firmware, upgrade to LADE 17.1 and then install usb support packages (opkg install /path/to/*ipk). Write down MAC addresses of LAN, WAN, WIFI_2G, WIFI_5G, you'll need it later.

3. Prepare USB flash drive with FAT32 partition (not exFAT, be careful) and copy @radmir padavan fw for dir-860l b1

4. Connect to telnet/ssh and mount usb flash drive and flash firmware:
mkdir /mnt/media
mount /dev/sda1 /mnt/media
cd /mnt/media
mtd -r write DIR-860L_3.4.3.9-099.trx firmware

5. Connect to console via telnet/ssh and flash mtd2.bin:
After reboot you will see ASUS wifi network, try to connect. At this stage firmware is very unstable, unit is slow and network is not working reliable. Default login is admin/admin and wifi pass is 1234567890 (check padavan fw pages for more info: https://bitbucket.org/padavan/rt-n56u/wiki/EN/FAQ). BE patient, get the console, mount /dev/sda1 and issue this command:
mtd_write write -r mtd2.bin "Factory"

6. Restore MAC addreses using lan_eeprom_mac, wan_eeprom_mac, radio2_eeprom_mac and radio5_eeprom_mac. Reboot

7. Done! Now everything should work smoothly.



Thank you very much for this. Pretty tough process but somehow I got through it. I had the same issue that others stated in seeing duplicate mac addresses in lede. I ended up grabbing the mac addresses from dd-wrt, then recover to stock Dlink to start the process.

One thing to note is the VPN client in Padavan has been impossible for me to configure and I gave up after a dozen or so tries. It's still a much more useful firmware, so I'll set up a different vpn router.
Huck
DD-WRT Novice


Joined: 06 Apr 2017
Posts: 9

PostPosted: Thu Sep 14, 2017 21:28    Post subject: Reply with quote
No complaints here has been rock stable since day 1 with padavan.Glad I was lucky enough to buy one when I did. They appear to have become quite rare to find anymore.
amilano
DD-WRT Novice


Joined: 22 Sep 2017
Posts: 1

PostPosted: Fri Sep 22, 2017 23:08    Post subject: Reply with quote
radmir wrote:
If anyone is interested I've compiled Padavan firmware for DIR-860L B1.
https://yadi.sk/d/6ttXcerpJ2hg3
No warranty. Backup your factory partition before flashing! Until you will not restore mtd2 router works unstable.


What did you change in config (for DIR-860L)?
Goto page Previous  1, 2, 3, 4 Display posts from previous:    Page 4 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum