Posted: Sat Sep 16, 2017 18:24 Post subject: Archer C9 Wifi 400Mbps Max on 802.11ac
Hello,
So I can only connect at wifi max 802.11ac 400Mhz to my Archer C9.
It is set on VHT80 (I have also tried VHT160 which I am not sure is support by the hardware but I tired anyway)
Channel is set to auto however it is 52 + 54 and is clear of other wifi nodes. It is set to only be AC.
Optimize Multicast Traffic, Explicit Beamforming and
Implicit Beamforming are all enabled.
Connected devices
Intel 7260 in Laptop should be 867 Mbps
Intel 3160 in Laptop should be 433 Mbps
Boardcom 802.11ac Adapter in Desktop (Asus z97 wifi) in think 867Mbps
This is with the devices close to the router.
These report 400Mbps and VHT80 in both dd-wrt and in windows (Expect
3160 reports 200Mbps)
Firmware I have tired:
04-05-2016-r29409
06-01-2017-r32170
09-11-2017-r33345
Did you benchmark it? Don't use auto channel, and what about Mixed mode? _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Mon Sep 18, 2017 8:10 Post subject:
do not set to auto, the only valid combination for (80Mhz + 80Mhz ) is 138 +144 +155, so forces it to 23dBm, even if you set it to 30dBm, choose country domain Canada or Haiti, also on 5Gz not all AC clients are real AC but AC draft and connect on N speeds... so its very client dependent situation too... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
@Xeon2k8 Mixed mode or N only doesn't change anything.
Alozaros wrote:
do not set to auto, the only valid combination for (80Mhz + 80Mhz ) is 138 +144 +155, so forces it to 23dBm, even if you set it to 30dBm, choose country domain Canada or Haiti, also on 5Gz not all AC clients are real AC but AC draft and connect on N speeds... so its very client dependent situation too...
Great thank you! That seem to have solved it.
Sweden the country I live in only has the option for Auto.
Not sure why.
So I set it to Canada set it to Channel 132 - 5.660 Ghz at VHT80 lower lower
@Xeon2k8 Mixed mode or N only doesn't change anything.
Alozaros wrote:
do not set to auto, the only valid combination for (80Mhz + 80Mhz ) is 138 +144 +155, so forces it to 23dBm, even if you set it to 30dBm, choose country domain Canada or Haiti, also on 5Gz not all AC clients are real AC but AC draft and connect on N speeds... so its very client dependent situation too...
Great thank you! That seem to have solved it.
Sweden the country I live in only has the option for Auto.
Not sure why.
So I set it to Canada set it to Channel 132 - 5.660 Ghz at VHT80 lower lower
The resulting channel is reported at 132 + 138
What channels have you got available now to choose from? _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Thanks very much