Joined: 13 Aug 2013 Posts: 6867 Location: Romerike, Norway
Posted: Sat Oct 21, 2017 12:08 Post subject:
Router: Asus RT-AC66U A1
Firmware: DD-WRT v3.0-r33555 giga (10/20/17)
Previous: DD-WRT v3.0-r33525
Kernel: Linux 3.10.107 #16344 Fri Oct 20 10:51:44 CEST 2017 mips
Status: Gateway, working
Reset: No
Errors/Notes: None yet. Bufferbloat Grade A on IPv4 and Grade D on IPv6.
Router: E4200
Firmware: DD-WRT v3.0-r33525 mega (10/17/17)
Previous: DD-WRT v3.0-r28015
Kernel: Linux 2.6.24.111 #32808 Tue Oct 17 00:52:20 CEST 2017 mips
Status: Client Bridge, working
Reset: Yes
Errors/Notes: NTP client not working
Time will not set automatically. Doesn't matter if I specify a NTP server (ip or name) in the gui. Running ntplient manually solves the problem temporarily.
Errors:Resetting to defaults on k3 builds kills wireless. After resetting the only options available are mixed mode and auto channel. When using the wl command to check the status it says wl driver adapter not found.
When I flash to a k2 build after the k3 build the wireless is still dead until I do another reset. Could the k3 build have some bad nvram defaults maybe?
If I install a k2 build + reset to defaults then install a k3 build without resetting everything seems to work fine. It only messes up when I reset to defaults on the k3 build.
Yep - same for me. Reset to defaults on E4200 and now no wireless on 2.4G. 5G seems ok. Flashed back without reset to 30880 and 2.4g worked fine again.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Sat Oct 21, 2017 17:56 Post subject:
redhawk0 wrote:
Only one issue remains for me. NTP still won't automatically get time when running Client Bridge or Repeater Bridge. I have to manually set it with the date command.
LOL.... I don't think I've ever quoted myself before...anyway...
I've added this line to my startup script. It now gets ntp correctly at bootup.
/usr/sbin/ntpclient -s -h us.pool.ntp.org
redhawk _________________ The only stupid question....is the unasked one.
Posted: Sat Oct 21, 2017 20:47 Post subject: ASUS RT-AC68U & Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r33555 std (10/20/17) - (previous r33180)
Kernel: Linux 4.4.93 #2148 SMP Thu Oct 19 09:17:43 CEST 2017 armv7l
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: Yes
Status: Ok
Uptime: 18 Minutes
CPU Temperature: CPU 68.0 °C / WL0 45.5 °C / WL1 45.5 °C
2 x E2000
Firmware: DD-WRT v3.0-r33555 mega (10/20/179 - (previous r33180)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled but tested to work
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 21 Minutes
CPU Temperature: WL0 54.0 °C
All devices working as AP's each with individual 1Gb wired connections to main firewall
Last edited by Newbrain on Sat Oct 21, 2017 20:49; edited 1 time in total
Router: WRT610N v1
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 2.4.37 #47030 Fri Oct 20 05:25:11 CEST 2017 mips
Status: Working with some issues
Reset: 30-30-30 before and after upgrade
Errors: Having issues with wifi like in build 33525.
- On wl0 (2.4 ghz), channel selection does not work when network mode is set to Mixed, but works when a different mode is selected (such as N-Only or NG-Mixed).
- On wl0, 40 mhz channel width does not appear to work correctly. The wireless status page displays the appropriate control + extension channels (assuming network mode is not mixed as above), but multiple macOS clients report only 20 mhz channel width. I have just learned that Apple products are limited to 20mhz channel width on 2.4ghz networks (Thanks Apple). The router is correctly utilizing all 40mhz of spectrum as configured.
Will edit with other routers when they have been updated.
Joined: 11 Aug 2017 Posts: 29 Location: edmonton, alberta, canadia!!
Posted: Sun Oct 22, 2017 2:04 Post subject:
Router: Asus RT-N66U
Firmware: v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
Status: Excellent
Reset: No (I should, but I was lazy ;)
Errors: None noticed as of yet (9 hours post-flash, heavy usage)
This build feels as rock solid as the previous BrainSlayer DD-WRT v3.0-r33215M big (08/25/17) build we've been using on our cable line - which was stable & fantastic as all out. I'm guessing this will be the build for our primary router for a while, it's been running so well (ie. nonstop 15-19Mbps outgoing streaming to twitch/seeding torrents/ and 5-60Mbps of netflix/torrents/perktv incoming since this the flash of this release this morning :)
Awesome job, thank you all for your work and sharing feedback so bums like me can have awesome routers! Can't wait for the 150/150 fiber install next month, that's for sure - bridged mode dd-wrt bliss!! _________________ Primary Router for Residential 150Mbps/150Mbps Fiber:
*Asus RT-N66U: running DD-WRT v3.0-r37961 std (12/12/18)*
Joined: 18 Feb 2007 Posts: 87 Location: Bern, Switzerland
Posted: Sun Oct 22, 2017 6:51 Post subject:
Router: Linksys WRT320 -> E2000
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 2.6.24.111 #32874 Fri Oct 20 01:07:50 CEST 2017 mips
Status: Up and running as Client Bridge
Reset: no
Errors:
- ntp not working -> fix with startup script
- Status - Wireless - Wireless Nodes: HT40 shown as HT20
- As AP: Virtual interfaces don't work
Router: Linksys WRT610Nv2 -> E3000
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Kernel: Linux 3.10.107 #16360 Fri Oct 20 11:07:53 CEST 2017 mips
Status: OK
Reset: no
Errors:
- TX limited to 150Mbps (unless speed set manually) _________________ Deployed:
Buffalo WZR-1750 - v3.0-r38580M kongac (02/05/19) - Router
Buffalo WZR-1750 - v3.0-r38580M kongac (02/05/19) - Client Bridge
Buffalo WZR-1750 - v3.0-r38100M kongac (12/27/18) - Router
Linksys WRT320 -> E2000 - v3.0-r33772 K30 mega (11/16/17) - Client Bridge
Router/Version: Linksys E3000
Firmware: DD-WRT v3.0-r33555 mega (10/20/17)
Flashed: now dd-wrt.v24-33555_NEWD-2_K2.6_mega-nv60k.bin, before dd-wrt.v24-33555_NEWD-2_K2.6_big-nv60k.bin
Kernel: Linux 2.6.24.111 #32874 Fri Oct 20 01:07:50 CEST 2017 mips
Previous: dd-wrt.v24-16994_NEWD-2_K2.6_mega-e2k-e3k.bin
or dd-wrt.v24-14929_NEWD-2_K2.6_std_usb_ftp-e3000.bin - forgot to note, but Firmware was 16994
Mode/Status: AP
Reset: no (power off 30)
Issues/Errors: No 5ghz wifi
with mega and big no more 5ghz wifi although web interface shows everything normal. is there an obvious error i commited?
update:
with
dd-wrt.v24-33555_NEWD-2_K3.x_mega-e3000.bin
5gh wifi back again
Additional finding: Quickly after reboot cpu load will continue rising and eventually max out cpu. Cause is ebtables on tap1 interface. Initializing ebtables in firewall does not help. Maybe an older problem has resurfaced in some devices?
(did regression test with older firmware, r29193 ... same config runs fine with the old release, cpu load well below 10%).
