Posted: Tue Feb 14, 2017 17:31 Post subject: WISP mode
Hello,
I updated my tp-link 810N v1 router with DD-WRT firmware (ver 29739).
Could you please help me to find the information how can I set up this router in hotspot (wisp) mode: connect to the wifi hotspot network and create another wifi network to share the internet. Is it possible with this firmware to do it?
Thank you!
UPD: I have found the solution! Thank you guys for the firmware and thank you for doing such job!
[quote="KrypteX"][quote="morpheon"]Can you confirm if the full 16mb is available in this version and has anyone got OpenVPN working?[/quote]
Only 8MB build, since it's taken from an 8MB flash router. It includes OpenVPN.[/quote]
Just installed it directly from OpenWRT and it flashed well and is now working brilliantly!
I am now on the services > VPN tab and only PPTP server and client mode are options, no evidence of OpenVPN!? What am I missing?
Seriously - KrypteX - thanks. I know others have posted requests for OpenVPN. My request is for snmp. I don't know the details of DD-WRT. Is it possible to do something like apt-get/yum install snmpd from SSH? or after installing this firmware can it be upgraded to something another version with additional features? I'm happy to be running DD-WRT w/o issues, but would love to learn more about how to add a few more features.
Posted: Wed Apr 19, 2017 19:23 Post subject: openVPN client on this router?
KrypteX wrote:
I've modified the header of the DD-WRT 29739 factory-to-ddwrt build intended for TL-WR841ND v11, so it will flash on a TL-WR810N v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29739 webflash build for TL-WR841ND v11.
Disclaimer: I haven't tested the attached builds myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.
Note: You must be logged in to be able to download the attachment.
I successfully installed this via webflash to my WR810n but i don't have openVPN client options. any suggestion?
thanks
doug
ADD: I'm guessing that any image that is less than 4mb will NOT contain openVPN. Hopefully someone will be able to do a full version (including openVPN) dd-wrt. tnx
I flashed to dd-wrt after reading the wiki, but now my device isn't working.
The DHCP server is running, assigns me an ip, and a ping request gives:
Quote:
Ping has started…
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=0.452 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.600 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.467 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.498 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.577 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.557 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.552 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=0.600 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=0.636 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=0.511 ms
--- 192.168.1.1 ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.452/0.545/0.636/0.058 ms
So the firmware is there. However I'm not able to access the gui.
I've tried on multiple machines with multiple browsers. Tried a 30/30/30 reset. But I really don't know what to do from here.
As I can see in the ftp (ftp://ftp.dd-wrt.com/betas/2017), there are releases for TL-WR810N V1 and V2 since build r33986 (12-04-2017), so I think this router is officially supported!
Supported Devices Page needs to be updated with this info.
I've just ordered a V2 from Amazon and plan to use as a repeater, waiting for it.
Has anyone tried some of the two available builds by the date (r33986 or r34080)?