[blkt]

Welcome to Atheros r53045 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 53028 (mirror)

• OpenVPN 2.6.3: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• zfs mdhcp nodogsplash nDPI UPnP Transmission WAN ksmbd cURL BearSSL Speedtest dnscrypt htop ddrescue iPhone ddns

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[Zyxx]

Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r53045 std (06/22/23) (prev. DD-WRT v3.0-r53028 std (06/20/23))
Kernel: Linux 4.9.337 #2015 SMP Thu Jun 22 05:32:09 +07 2023 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi (FW: DD-WRT), Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed 20 minutes ago, OK.

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r53045) / Linux 4.9.337 #2015 SMP Thu Jun 22 05:32:09 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r53028 std (06/20/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[mrjcd]

Linksys EA8500
DD-WRT v3.0-r53045 std (06/22/23)
Linux 4.9.337 #2013 SMP Thu Jun 22 05:11:16 +07 2023 armv7l
scp install over r53028
main gateway unit ...all worky fine

#

Linksys WRT160NL
Firmware VersionDD-WRT v3.0-r53045 std (06/22/23)
Kernel VersionLinux 3.10.108-d11 #136147 Thu Jun 22 06:59:32 +06 2023 mips
GUI install over r53001
all ok

#

Netgear WNDR3700 V4
DD-WRT v3.0-r53045 std (06/22/23)
Linux 3.18.140-d6 #175228 Thu Jun 22 09:36:33 +06 2023 mips
GUI install over r53001
WAP + isolated guest net + OVPN server ... all ok

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r53045 std (06/22/23)
Previous/Reset: DD-WRT v3.0-r53028 std (06/20/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

[jrscs]

Router/Version: Netgear XR500 Nighthawk Pro Gaming
Firmware: DD-WRT v3.0-r53045 std (06/22/23)
Kernel: Linux 4.9.337 #2015 SMP Thu Jun 22 05:32:09 +07 2023 armv7l
Previous: ] DD-WRT v3.0-r53028 std (06/20/23)
Update Method: SSH / CLI using PuTTY
Mode/Status: Gateway/Ok
Reset: No
Setup Using: 2.4 GHz N/G Mixed 20 MHz - Vanilla , 2.4 GHz guest (VAP), 5.0 GHz AC/N Mixed 80 MHz - Vanilla, IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding, USB, NAS, Samba exFAT (Restricted User/Password required), NTP Client, Wireguard Server, and Wake-on-WAN (Internet)
Issues/Errors: OK

[KACTET]

Router/Version: Netgear XR500
Update method: WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin_r53045 / Linux 4.9.337 #2015 SMP Thu Jun 22 05:32:09 +07 2023 armv7l
Previous/Reset: r53028 / no
Mode/Status: Gateway / Up and running for 5:13 hours
Issues/Errors: Nothing significant
____________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r53045 / Linux 3.18.140-d6 #175186 Thu Jun 22 08:20:55 +06 2023 mips
Previous/Reset: r53028 / no
Mode/Status: AP wired and wireless / Up and running for 6:08 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus!

[whitebeard]

Router/Version: DD-WRT v3.0-r53045 std (06/22/23)
Kernel: Linux 4.9.337 #2014 SMP Thu Jun 22 05:21:34 +07 2023 armv7l
Previous/Reset: 53028 / No Reset
Mode: Gateway, SFE Disabled, STP Disabled, Wifi 5(VANILLA)/2.4(VANILLA) Main+Guest(VAP), DNSMasq, USB/Entware, DNSCrypt, NAS, traff, Static & DHCP
Issues/Errors: Upgraded smoothly.

Note that previous update 53028 stalled at WIFI config and required a POR to reboot successfully.

Thanks to BS and crew for all your good work.

[Bajramo]

Curl command not working in this build.

[computerperson]

Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r53045 std (06/22/23) / Linux 4.9.337 #2015 SMP Thu Jun 22 05:32:09 +07 2023 armv7l
Previous/Reset: 06/20/2023 - r53028 / No Reset
Mode/Status: AP / Active
Issues/Errors: No issues / No errors

A note that for me these last 2 dd-wrt updates had fast reboots as compared to most previous versions (3-5 mionutes), and no issues with startup script execution on reboot.

Thanks to BS and the development team.

Additional note to Bajarmo - my curl commands are working fine.

[kernel-panic69]

[ramblin]

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r53045 std (06/22/23)
Kernel: Linux 4.9.337 #2013 SMP Thu Jun 22 05:11:16 +07 2023 armv7l
Reset: No ...GUI upgrade from r53001
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: Almost never

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r53045 std (06/22/23)
Kernel: Linux 4.9.337 #2013 SMP Thu Jun 22 05:11:16 +07 2023 armv7l
Reset: No ...GUI upgrade from r53001
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None, never, notta

Thanks BS and all the team that keep this working !!!!

[Bajramo]

[Jovan]

Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r53045 std (06/22/23)
Kernel Version Linux 3.18.140-d6 #175186 Thu Jun 22 08:20:55 +06 2023 mips

Working OK as AP, HT40, mixed.

I have a question, if anybody knows the answer. I've seen lately in SVN a lot of work done pertaining a CLI Speedtest. Does anybody know how that works, if and how can it be accessed? I know that probably doesn't apply for my tiny memory router but there's no harm to ask.

[tatsuya46]