Posted: Fri Nov 24, 2023 6:25 Post subject: New Build - 11/24/2023 - r54109
Welcome to Atheros r54109 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Fri Nov 24, 2023 10:43 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r54109 std (11/24/23)
Kernel Version Linux 3.18.140-d6 #185481 Fri Nov 24 07:43:18 +06 2023 mips
update: GUI r54095 > r54109
reset: NO
mode: Gateway
status: Operational 1h+
errors: Nothing new, yet...Thanks BS and Team !
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r54109 std (11/24/23)
Kernel Version Linux 6.1.63 #50 SMP Fri Nov 24 06:39:29 +07 2023 armv7l
update: CLI r54079 > r54109
reset: NO
mode: Gateway
status: Operational 1h+
errors: Flashing via CLI (ssh) still needs reboot via magic number codes...
root@router:/tmp# reboot
-sh: chmod: I/O error
-sh: /tmp/.rc_shutdown: Permission denied
-sh: /sbin/reboot: I/O error
root@router:/tmp# echo u > /proc/sysrq-trigger
root@router:/tmp# echo s > /proc/sysrq-trigger and now on this line it reboots...it used to be ok on synch and reboot was issued by code b next line...
root@router:/tmp# echo b > /proc/sysrq-trigger
no idea what is going on with reboot script, but for me been away of the unit...flashing via CLI it is always a trill and suspense, now even more fun...but..as long as i ve found the "hot water" (how to reboot) im fine
Otherwise nothing new, yet...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Linksys WRT160NL
DD-WRT v3.0-r54109 std (11/24/23)
Linux 3.10.108-d11 #146044 Fri Nov 24 05:56:18 +06 2023 mips
GUI install over r54095
all ok
#
Linksys E2100L
DD-WRT v3.0-r54109 std (11/24/23)
Linux 3.10.108-d11 #146048 Fri Nov 24 06:03:04 +06 2023 mips
GUI install over r54095
all ok
#
Linksys EA8500
DD-WRT v3.0-r54109 std (11/24/23)
Linux 6.1.63 #50 SMP Fri Nov 24 06:39:29 +07 2023 armv7l
scp 'firmware.bin install over r53562
after fianlly booted it came back as RESET ...
...NO GOOD FOR ME
Router/Version: EA8500
File/Kernel: Linux 6.1.63
Previous/Reset: r54103 std / Auto Reset
Mode/Status: Test Unit
Issues/Errors: Bootlooping after restore
Flashed this build from a booted Partition 2 (r54103 test release) to Partition 1. After several reboots and NVRAM ERASES, it actually DID boot to Partition 1 w/r54109. So I restored the backup from r54103. This caused the router to be in a constant bootloop with numerous automatic NVRAM ERASE procedures as seen in the serial output. I have let this loop run now for about 45 minutes which included pulling the power plug a few times to no avail. After growing tired of watching this, I then TFTPed 53562 back to partition 1. Bootlooped many times then eventually did boot to r54103 on Partition 2. Weird! _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
