Posted: Sun Nov 26, 2023 8:36 Post subject: New Build - 11/26/2023 - r54135
Welcome to Atheros r54135 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Update method: Console Upgrade
Router/Version: TP-Link TL-WR841ND v8
File/Kernel: all mentioned below
Previous/Reset: DD-WRT v3.0-r53939 std (11/09/2023) / No reset.
Mode/Status: Gateway, Wireless Radio Mode: Station
Issues/Errors: On TP-Link TL-WR841ND v8:
11-22-2023-r54095 WiFi Client does not connect, Site Survey shows needed AP
11-24-2023-r54109 WiFi Client does not connect, Site Survey shows needed AP
11-26-2023-r54135 WiFi Client does not connect, Site Survey shows needed AP
Downgraded to r53939 in order to work as it should.
Update method: Console Upgrade
Router/Version: GL.iNet-AR150
File/Kernel: all mentioned below
Previous/Reset: DD-WRT v3.0-r53939 std (11/09/2023) / No reset
Mode/Status: Gateway, Wireguard, OpenVPN Server and Client, PPTP Server and Client, DDNS, SSH, Wireless Radio Mode: Station
Issues/Errors: On GL.iNet-AR150:
11-17-2023-r54079 Open VPN server stops after couple of hours
11-22-2023-r54095 Open VPN server stops after couple of hours
11-24-2023-r54109 Open VPN server stops after couple of hours
11-26-2023-r54135 Open VPN server stops after couple of hours
Downgraded to r53939 in order to work as it should.
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r54135 / Linux 3.18.140-d6 #185715 Sun Nov 26 09:22:21 +06 2023 mips
Previous/Reset: r54079 / no
Mode/Status: AP wired and wireless / Up and running for 3:51 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: EA8500
File/Kernel: 6.1.63
Previous/Reset: r53562 / No Reset
Mode/Status: Test Unit
Issues/Errors: Ugh!
Flash from Partition 1 (r53562) to Partition 2. After bootlooping several times and erasing NVRAM it did finally boot to partition 2 (r54135). Went to restore the backup made from r54103 and got this:
Code:
umount: can't unmount /usr/local: Invalid argument
[init] : Terminated....................................
[ 368.758411] qcom_scm firmware:scm: No available mechanism for setting download mode
[ 368.758488] reboot: Restarting system
It now bootloops into infinity. Also, it no longer auto returns to Partition 1 as it should, even after at least 15 boot attempts. Only TFTP can fix it at this point. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Router/Version: EA8500
File/Kernel: 6.1.63/DD-WRT v3.0-r54135 std (11/26/23)
Previous/Reset: r53562/not set to reset
Mode/Status: gateway/working
Issues/Errors: several reboots and nvram reset
Flash from Partition 2 (on r53562) to Partition 1 via cli. After boot looping several times it came up reset on r54135 part 1.
So far working with basic settings. I am using it right now to post this. I will try additional settings.
edit: Flashed r54135 to part 2 via cli and it came up w/o reset and was working. Applied some settings and rebooted. Now bootlooping and not coming up.
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r54135 std (11/26/23)
Kernel Version: Linux 6.1.63 #51 SMP Sat Nov 25 06:18:58 +07 2023 armv7l
Previous Build /Reset: DD-WRT v3.0-r54079 std (11/17/23) / NO, CLI Update -> GUI Reboot (CLI Reboot command failed)
Mode/Status: GW / Working Well
Issues/Errors: GW speed is 600mps with k6.1 (k4.9 was +900mps) / none
Services Used: DHCP-WAN,IPv6-6to4,NTP,WG-Client,VLAN-GUI,BR1-7,SSH,Syslog,Cron,USB-Storage,Entware DNSCrypt v2.1.2
Services Disabled: Both-Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6
Running over an hour.
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r54135 std (11/26/23)
Kernel Version: Linux 6.1.63 #51 SMP Sat Nov 25 06:18:58 +07 2023 armv7l
WiFi DD-WRT Firmware: 10.4-ddwrt-9984-tW-13-7405M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 2ddc88b9
WiFi Vanilla Firmware: 10.4-3.18-00002 api 5 features no-p2p,mfp,peer-flow-ctrlllows-mesh-bcast,no-ps,peer-fixed-rate crc32 9959da8e
Previous Build/Reset: DD-WRT v3.0-r54079 std (11/17/23) / NO, CLI Update -> Power Cycle (unable to reboot)
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: Vanilla 2.4Ghz-20Mhz & 5Ghz-160Mhz Radios,Static-WAN,IPv6-6to4,NTP,2xWG-Clients,VAPx,VLAN-GUI,BR0-7,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.2
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba
Running over an hour.
Both r7800s are using the default Performance Mode, All Services are working only issue is my Gigbit connection is limited to 600Mbps.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router/Version: EA8500
File/Kernel: 6.1.63/DD-WRT v3.0-r54135 std (11/26/23)
Previous: r54135
Status: Okay once booted. Reverted to -r53562
Issues/Errors: r54135 boot looping.
After above attempt with r54135 on both partitions and ~30 min of rebooting it came up on r54135 on part 2. Once up, it seems okay.
If it is set to boot to part 2 it seems to work okay, comes up after one boot, and retains nvram. Part one boot results in boot loops and the reset after so many attempts. The time required to boot successfully to part 2 seems to be random.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Sun Nov 26, 2023 21:32 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r54135 std (11/26/23)
Kernel Version Linux 6.1.63 #51 SMP Sat Nov 25 06:18:58 +07 2023 armv7l
update: CLI r54109 > r54135
reset: NO
mode: Gateway, running set up form my signature
status: Operational 10h+
errors: Unit still unable to reboot via CLI after update...
need to use echo b > /proc/sysrq-trigger the odd bit it started to reboot on this line too... echo s > /proc/sysrq-trigger otherwise nothing new, yet...Thanks BS and Team !
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r54135 std (11/26/23)
Kernel Version Linux 3.18.140-d6 #185729 Sun Nov 26 09:43:32 +06 2023 mips
update: GUI r54109 > r54135
reset: NO
mode: Gateway/VPN client
status: Operational 10h+
errors: Nothing new, yet...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Mon Nov 27, 2023 2:35 Post subject: New Build - 11/26/2023 - r54135
Netgear r7500v2 Up and running for 7hours and it disconnected from the internet after i downloaded New World game on steam sigh back to 11/21/2023 - r54095 oh and sfe was running!!!!
Joined: 12 Dec 2007 Posts: 783 Location: Pittsburgh, PA USA
Posted: Mon Nov 27, 2023 3:37 Post subject:
Router/Version: Netgear R7800 x 3
File/Kernel: DD-WRT v3.0-r54135 std (11/26/23)
Previous/Reset: DD-WRT v3.0-r54109 std (11/24/23), no reset this time
Mode/Status: Gateway (SFE disabled), Access Point (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r), IPV6 (DHCP6 w/ prefix delegation), Entware, DOT/DOH via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server, performance govenor + 2 wired access points (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r), performance govenor
Issues/Errors:
Up 13 hours. USB 3.0 and 2.0 both working properly. Wireguard and OpenVPN working as expected. Speed (tested via nPerf.com) is as expected, both wired and wireless. No random reboots, everything has been solid.