Openvpn has stopped working-new setup didn't help

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Goto page Previous  1, 2
Author Message
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3006
Location: Germany

PostPosted: Fri Dec 01, 2023 9:12    Post subject: Reply with quote
If there is no "Path" field, then no "Path" is required.

The field is actually only available for "Custom"

_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
Sponsor
bobby121418
DD-WRT Novice


Joined: 17 Jan 2022
Posts: 32

PostPosted: Wed Dec 06, 2023 21:07    Post subject: Reply with quote
Hi,
I am still struggling with this.
I am attaching latest Server log.

Any suggestions?
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12923
Location: Netherlands

PostPosted: Thu Dec 07, 2023 7:33    Post subject: Reply with quote
Your server log shows the server is started but there is not even an attempt for connection to the server.
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
bobby121418
DD-WRT Novice


Joined: 17 Jan 2022
Posts: 32

PostPosted: Thu Dec 07, 2023 10:10    Post subject: Reply with quote
Thanks!
It has been like this for a while.
So, the issue should be from the client side? I have checked the profile and it is as indicated in the guide. In fact from both server and client, both are as indicated by the guide.
So, I am puzzled.
Thanks
bobby121418
DD-WRT Novice


Joined: 17 Jan 2022
Posts: 32

PostPosted: Thu Dec 07, 2023 20:09    Post subject: Reply with quote
bobby121418 wrote:
Thanks!
It has been like this for a while.
So, the issue should be from the client side? I have checked the profile and it is as indicated in the guide. In fact from both server and client, both are as indicated by the guide.
So, I am puzzled.
Thanks


Here is the latest client log.
Thanks
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12923
Location: Netherlands

PostPosted: Thu Dec 07, 2023 21:56    Post subject: Reply with quote
Your client log shows that your client cannot connect to your server:
Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)

So maybe the port forward on the main router is wrong, maybe the main router does not have a Public IP address, maybe your isp is blocking , maybe the address is wrong etc.


Edit: of course you have read the OpenVPN Troubleshooting guide but in case you have missed it:

Quote:
TLS Error: TLS key negotiation failed to occur within 60 seconds
Server is not reachable i.e. you have a network connection error (unless you are using TLS-crypt which is not setup
correctly):
• Check server address/DDNS
• Check DDNS,
• Check if your WAN has an IPv4 CGNAT address (IP address starting with 100) or Dual stack Lite
• Check port,
• Check Port Forward if server is not on the primary router.
• Check /disable firewall
• Sometimes an ISP blocks often used ports, Check with your ISP and/or use TCP port 443, this is not blocked.
• Older DDWRT version block UDP ports when SFE is enabled, so when in doubt disable SFE or CTF.
To check if you can reach the server from the client you can use the ping utility.
Beware not all servers answer to ping.
From the Windows cmd, the Fing app on your phone or ping from the CLI (telnet/Putty) if your client is a DDWRT or
other router use:
ping <ip-server-address>
If your server is a DDWRT router then by default it does not answer to ping so for this test you should
disable/uncheck "Block Anonymous WAN Requests (ping)" on the Security tab of the DDWRT OpenVPN server.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum