_________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Thanks for your answer. Activation was done and different versions were installed. but the result did not change. It works fine when I install stock firmware and openwrt.
System logs / serial logs would help determine the problem, possibly. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Tue Jan 02, 2024 7:57 Post subject:
yeah logs would be good. in addition you have to consider that i never had a v2 in my hands. just a v1. so the port was made for a v1. for v2 i dont have any details about the hw. usually its very easy to port as it seems if just a card is not detected. but cannot say anything without some logs. according to my infos the v2 has just a wave2 chipset so its likelly it wont work since the wave 2 chipset firmware is not included. so this should be easy to fix
btw:
i included now the wave 2 firmware for this 355v2 into the firmware bin with some modifications (by guess). so i hope next firmware release will work (should be released today) _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Thu Jan 04, 2024 8:55 Post subject:
would be good to have some test results for the new image _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Fri Jan 05, 2024 5:26 Post subject:
really funny. people asking for a problem solution and then i get no response anymore after i made a change for them _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
really funny. people asking for a problem solution and then i get no response anymore after i made a change for them
Thank you very much for your answer. I haven't had time to enter the forum for a while. I'll try it right away and let you know. Thank you very much for your interest.
Thank you for your interest. I installed the firmware, but the wireless tab disappeared. I added the syslog logs of the wireless working version and the latest software that is not working.
thanks.
yeah logs would be good. in addition you have to consider that i never had a v2 in my hands. just a v1. so the port was made for a v1. for v2 i dont have any details about the hw. usually its very easy to port as it seems if just a card is not detected. but cannot say anything without some logs. according to my infos the v2 has just a wave2 chipset so its likelly it wont work since the wave 2 chipset firmware is not included. so this should be easy to fix
btw:
i included now the wave 2 firmware for this 355v2 into the firmware bin with some modifications (by guess). so i hope next firmware release will work (should be released today)
For what it's worth, on my R7800 I had problems with some of the December, 2023 builds where the 5G radio would not come up. I could see it in the UI, but it would not show up on any devices so I could not connect to it. However, those problems are gone as of the latest January 2024 build. (54682) _________________ - Netgear R7800 -- OpenWRT 23.05.2
- Cellular modem with CGNAT
- SMB NAS with multiple users and private directories.
- USB hard disk plugged into router as NAS drive.
@UnicornStallion: The device was not officially supported until 54682. The log shows no wifi hardware initialized on the current release.
So it is supported now? As of 54682? All I am saying is that 5G in my Atheros based router worked, then broke, but works again with the latest January build. _________________ - Netgear R7800 -- OpenWRT 23.05.2
- Cellular modem with CGNAT
- SMB NAS with multiple users and private directories.
- USB hard disk plugged into router as NAS drive.
