Posted: Mon Jan 29, 2024 14:56 Post subject: New Build - 01/29/2024 - r55033
Welcome to Broadcom r55033 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r55033 std / Linux 4.4.302-st48 #10937 SMP Mon Jan 29 05:28:59 +06 2024 armv7l
Previous/Reset: r55009 / no
Mode/Status: Gateway / Up and running for 3:21 hours
CPU Temperature: CPU 63.6 °C / WL0 40.0 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
CPU temperature readings started changing after one second from 62.5 - 63.6 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
This build has been buffering for me on twitch.tv and it is every stream. I did a power cycle of the router and my ISP's modem but that did not help. Going back to r55003 which did not.
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Wed Jan 31, 2024 4:47 Post subject:
Bad build for Asus RT-N18U. You might be denied access to the router if you were using USB as /jffs and /opt. Hot-plugging a USB flash drive to this build might stall the kernel.
ksmbd was still not working properly. I am wondering whether the USB problem and ksmbd issues were pointing to some critcal kernel changes.
Do NOT flash! Stay with build 54682.
Update: Because of stability issues in the wireless connections, I went back to build 54637!
Bad build for Asus RT-N18U. You might be denied access to the router if you were using USB as /jffs and /opt. Hot-plugging a USB flash drive to this build might stall the kernel.
ksmbd was still not working properly. I am wondering whether the USB problem and ksmbd issues were pointing to some critcal kernel changes.
Do NOT flash! Stay with build 54682.
ksmbd does not work with my wndr3700v2 router neither. It's running a 3.10 Linux :
r54682 Linux 3.10.108-d11 #149561 Tue Jan 2 09:12:10 +06 2024 mips, ksmbd works
r55033 Linux 3.10.108-d11 #151692 Mon Jan 29 09:39:22 +06 2024 mips, ksmbd doesn't work
Error example : if I try to copy a folder containing about 10 files and a total of 100MB data using a Windows 11 station to my wndr3700v2 running ksmbd, the Windows copy status bar strangely goes forward and backward, finally saying the folder is already in use. I then choose "ignore" for every file, and finally nothing is created except the folder. Btw folder delete works. Load average also goes quite high and does not come down easily. After a few minutes, load average still reports "2.11, 2.01, 1.37"
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r55033_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st48 #28331 Mon Jan 29 06:17:55 +06 2024 mips
Previous/Reset: r55009 / no
Mode/Status: Gateway / Up and running for 1 days, 1:39
CPU Temperature: WL0 47.5 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2