EA6300v1 functional firmware

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
View previous topic :: View next topic  
Author Message
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2038
PostPosted: Fri Mar 29, 2024 11:52    Post subject: Reply with quote
Sunslide wrote:
egc wrote:
Overclocking is removed from the GUI but you should still be able to manually overclock.


How to? nvram get only returns that i have choices 800 and 333mhz as the gui says. I was following the overclock guide on dd-wrt so no luck there. I normally adjust cpufreq in linux under /sys/devices/system/cpu/cpu0/cpufreq/..... but that is not there.


From command line:
Code:
nvram get clkfreq (get current clock rate)
nvram set clkfreq=1000,333
nvram set overclocking=1000
nvram commit
reboot


Worked for me, change settings to your prefered.

Best not change the memory clock speed ie:333

My understanding was that BrainSlayer removed overclocking from GUI because people were bricking their unit.

Use at your own risk.
_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way
Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad (1.1M blocked) + Blocklist Collection

Back to top View user's profile Send private message
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12922
Location: Netherlands
PostPosted: Fri Mar 29, 2024 12:03    Post subject: Reply with quote
@bushant is correct. See also the wiki: https://wiki.dd-wrt.com/wiki/index.php/Overclocking

There is an overclocking patch made for the GUI by me but it is not generally available:

Naamloos.jpg
 Description:
 Filesize:  65.64 KB
 Viewed:  226 Time(s)

Naamloos.jpg

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top View user's profile Send private message
LemmingFactory
DD-WRT Novice


Joined: 13 Apr 2017
Posts: 14
PostPosted: Sat Mar 30, 2024 9:13    Post subject: Reply with quote
kernel-panic69 wrote:
I edited the linked guide post in the forum with the direct download link below.


Thanks! Hope to try flashing the EA6300 again soon.
Back to top View user's profile Send private message
Sunslide
DD-WRT Novice


Joined: 10 Mar 2024
Posts: 7
PostPosted: Fri Apr 05, 2024 1:40    Post subject: Reply with quote
Thank you!!!!
It appears I had missed "nvram set clkfreq=" command.
Kinda confusing in the tutorial because it just sets it to the same clkfreq as what it was so I thought that was pointless.

whats our max safe speeds with a fan?
Back to top View user's profile Send private message
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum