Posted: Thu Aug 30, 2007 13:16 Post subject: MAC Radius Client not working
I have a WRT54GL and I'm unable to get the MAC-Radius-Client working.
I tried several Firmware-Versions (v.23, v.24 RC ...), but I can't get the MAC-Radius-Client working.
The Radius-Server is working fine (since it works with several other APs), and if I log in into the WRT and use the command-line to make a radius-auth-request everything works as expected. So the connection is okay and works.
But now, when a wireless client is logging in, the WRT doesn't even try to make an auth request, it just accepts the client so he can access the network.
The "Radius-Tab" looks like:
MAC Radius Client: enabled
MAC-Format: aa-bb-cc-dd-ee-ff
Radius Server IP: set correct
Radius Port: set correct, too
Maximum Unautenticated Users: 0
Password Format: MAC Address
Radius Shared secret: set correctly
Override Radius if server is unavailable: not checked
I listened with tcpdump at the network interface of the radius-server, I can see my manual requests from the commandline, but when a wireless client connects (and his mac should be checked agains the radius), there is silence.
Ya, I have spent the last 2 hours dealing with the same problem on a Linksys WRT150N. I tried v24 RC5, RC6.2, RC7, and the release. None even attempted to authenticate, however when i test it in SSH it can communicate with RADIUS without issue.
same problem here. have 3 mikrotik routers, one with radius server. and i use 3 open-mesh 0M1P as repeater. with a virtual interface for the clients using radius authentication
Router Model Fonera 2100/2200
Firmware Version DD-WRT v24-sp2 (10/10/09) std - build 13064