Author
Message
barryware DD-WRT Guru Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Fri Dec 19, 2008 17:25 Post subject:
redhawk0 wrote: barryware...by any chance do you have the original BSP from your V8 unit. Tornado is in need of it....let me know.
redhawk
This would be it...
Edit: Attachment deleted because no good. Not complete. _________________[Moderator Deleted] Last edited by barryware on Thu Jan 08, 2009 16:53; edited 1 time in total
Back to top
Sponsor
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Dec 19, 2008 17:31 Post subject:
barryware wrote: redhawk0 wrote: barryware...by any chance do you have the original BSP from your V8 unit. Tornado is in need of it....let me know.
redhawk
This would be it...
Unfortuneatly, this is not a complete BSP....BSP is 320K in size.
You must use -backup:bsp to get it off a vxworks unit.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
barryware DD-WRT Guru Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Fri Dec 19, 2008 19:14 Post subject:
Bummer.. I have a wholeflash if that will help. _________________[Moderator Deleted]
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Dec 19, 2008 19:20 Post subject:
barryware wrote: Bummer.. I have a wholeflash if that will help.
Yes...send me a PM with it.
Thanx...Tornado can extract the BSP from a wholeflash.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
mpho01 DD-WRT Novice Joined: 10 Jun 2006 Posts: 25
Posted: Sun Dec 21, 2008 6:51 Post subject: WAP54G ver 3.1
Is there a compress CFE for a WAP54G v3.1
Thanks
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Sun Dec 21, 2008 13:42 Post subject: Re: WAP54G ver 3.1
mpho01 wrote: Is there a compress CFE for a WAP54G v3.1
Thanks
No...
redhawk _________________ The only stupid question....is the unasked one.
Back to top
roadzy DD-WRT User Joined: 29 Jun 2008 Posts: 79
Posted: Mon Dec 29, 2008 0:05 Post subject:
should i just revert to the normal micro build until you guys figure out why its like super slow? is that the best to go to from the micro+ ssh build?
Back to top
bausker1 DD-WRT Novice Joined: 13 Oct 2008 Posts: 40
Posted: Thu Jan 08, 2009 9:51 Post subject: jææ
I've got a WRT54GS v6 if you need tester for a compressed CFE...
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Thu Jan 08, 2009 12:48 Post subject:
V5.1 is now supported. See top post for link.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
myacct DD-WRT Novice Joined: 08 Oct 2008 Posts: 18
Posted: Mon Jan 12, 2009 16:09 Post subject: Re: CFE compressors available for some neutered Linksys unit
redhawk0 wrote: This TOP post will contain the currently supported units...no need to search through this entire thread for updates....redhawk
Hello all,
Many ask about the Micro_Plus builds. Check here for past discussion.
We now have the CFE compression routine finished for the following units. (more to follow in this thread...this top post will include updates as they come online)
WRT54G v5.0 and v5.1 - includes file and readme document.
WRT54G v8.0 - includes file and readme document.
WRT54G v8.1 - A compressor will not be available for the WRT54G v8.1 - it already has a 128K CFE....it can run micro+ without updating the CFE.
WRT54G v8.2 - includes file and readme document.
Check back here for updates as we get them tested and made available.
[EDIT] - please don't ask about a specific model's availability...we will get them posted as we get them tested.
redhawk
Hello redhawk0 ,
Can you provide a compressed CFE (128k) of WRT54G v5 for me to flash via JTAG directly? Thanks a lot!
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Mon Jan 12, 2009 21:48 Post subject:
Yes...send me a PM with your MAC address from the bottom of your unit.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
myacct DD-WRT Novice Joined: 08 Oct 2008 Posts: 18
Posted: Wed Jan 14, 2009 5:23 Post subject:
I wonder if there can be a general tool under Windows/Linux to compress any un-compressed CFE?
Back to top
cecilyen DD-WRT Novice Joined: 17 Jun 2007 Posts: 5
Posted: Sat Jan 17, 2009 23:50 Post subject:
Any chance for GS model to have compressed CFE?
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Sun Jan 18, 2009 0:48 Post subject:
cecilyen wrote: Any chance for GS model to have compressed CFE?
Not yet....it is on the todo list though.
redhawk _________________ The only stupid question....is the unasked one.
Back to top
toolman667 DD-WRT Novice Joined: 12 Feb 2009 Posts: 2
Posted: Thu Feb 12, 2009 15:42 Post subject:
redhawk, thanks so much for all your hard work!
I do however have a bit of a problem with one of my WRT54Gv5 . I followed the instructions to a T (http://www.dd-wrt.com/dd-wrtv2/downloads/others/tornado/CFE_Updater/WRT54Gv5/WRT54G-V5.0-Comp-Readme.txt)
Waited 10 minutes in between flashes. Now it just has a blinking power light, it accepts pings (100ttl) and it also accepts infinitely many tftp sends, and doesn't want to load the image tftp'd. I've tried development revisions, stable releases, nothing will load.
I of course backed up my full 256k CFE before trying this (thanks to the readme's suggestion). But a JTAG is the only way to get it back on there? Or is there something else I can do before I build my jtag cable?
EDIT: Actually, I got it working... apparently the directions for MACOS/Linux people are different... tftp does not use binary mode by default, even if there is a "bin" file supplied. So after setting my tftp with the following commands:
Code: tftp 192.168.1.1
binary
rexmt 1
timeout 60
trace
tftp> put file.bin
Thanks for this Updater!
PS. I have a WRT54GSv6 that needs a CFE compressed... I can provide any needed info if you'd like, and gladly be a tester.
Back to top