Joined: 04 Jan 2007 Posts: 10812 Location: Wherever the wind blows- North America
Posted: Fri Dec 19, 2008 17:31 Post subject:
barryware wrote:
redhawk0 wrote:
barryware...by any chance do you have the original BSP from your V8 unit. Tornado is in need of it....let me know.
redhawk
This would be it...
Unfortuneatly, this is not a complete BSP....BSP is 320K in size.
You must use -backup:bsp to get it off a vxworks unit.
redhawk _________________ I currently test dd-wrt on Asus, Buffalo, Linksys, and Netgear. Too many to list.
Looking for more test units (newer models) for the project...got a brick?...PM me to make a donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.
Joined: 04 Jan 2007 Posts: 10812 Location: Wherever the wind blows- North America
Posted: Fri Dec 19, 2008 19:20 Post subject:
barryware wrote:
Bummer.. I have a wholeflash if that will help.
Yes...send me a PM with it.
Thanx...Tornado can extract the BSP from a wholeflash.
redhawk _________________ I currently test dd-wrt on Asus, Buffalo, Linksys, and Netgear. Too many to list.
Looking for more test units (newer models) for the project...got a brick?...PM me to make a donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.
Joined: 04 Jan 2007 Posts: 10812 Location: Wherever the wind blows- North America
Posted: Sun Dec 21, 2008 13:42 Post subject: Re: WAP54G ver 3.1
mpho01 wrote:
Is there a compress CFE for a WAP54G v3.1
Thanks
No...
redhawk _________________ I currently test dd-wrt on Asus, Buffalo, Linksys, and Netgear. Too many to list.
Looking for more test units (newer models) for the project...got a brick?...PM me to make a donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.
Joined: 04 Jan 2007 Posts: 10812 Location: Wherever the wind blows- North America
Posted: Thu Jan 08, 2009 12:48 Post subject:
V5.1 is now supported. See top post for link.
redhawk _________________ I currently test dd-wrt on Asus, Buffalo, Linksys, and Netgear. Too many to list.
Looking for more test units (newer models) for the project...got a brick?...PM me to make a donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.
Posted: Mon Jan 12, 2009 16:09 Post subject: Re: CFE compressors available for some neutered Linksys unit
redhawk0 wrote:
This TOP post will contain the currently supported units...no need to search through this entire thread for updates....redhawk
Hello all,
Many ask about the Micro_Plus builds. Check here for past discussion.
We now have the CFE compression routine finished for the following units. (more to follow in this thread...this top post will include updates as they come online)
Joined: 04 Jan 2007 Posts: 10812 Location: Wherever the wind blows- North America
Posted: Mon Jan 12, 2009 21:48 Post subject:
Yes...send me a PM with your MAC address from the bottom of your unit.
redhawk _________________ I currently test dd-wrt on Asus, Buffalo, Linksys, and Netgear. Too many to list.
Looking for more test units (newer models) for the project...got a brick?...PM me to make a donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.
Joined: 04 Jan 2007 Posts: 10812 Location: Wherever the wind blows- North America
Posted: Sun Jan 18, 2009 0:48 Post subject:
cecilyen wrote:
Any chance for GS model to have compressed CFE?
Not yet....it is on the todo list though.
redhawk _________________ I currently test dd-wrt on Asus, Buffalo, Linksys, and Netgear. Too many to list.
Looking for more test units (newer models) for the project...got a brick?...PM me to make a donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.
I do however have a bit of a problem with one of my WRT54Gv5 . I followed the instructions to a T (http://www.dd-wrt.com/dd-wrtv2/downloads/others/tornado/CFE_Updater/WRT54Gv5/WRT54G-V5.0-Comp-Readme.txt)
Waited 10 minutes in between flashes. Now it just has a blinking power light, it accepts pings (100ttl) and it also accepts infinitely many tftp sends, and doesn't want to load the image tftp'd. I've tried development revisions, stable releases, nothing will load.
I of course backed up my full 256k CFE before trying this (thanks to the readme's suggestion). But a JTAG is the only way to get it back on there? Or is there something else I can do before I build my jtag cable?
EDIT: Actually, I got it working... apparently the directions for MACOS/Linux people are different... tftp does not use binary mode by default, even if there is a "bin" file supplied. So after setting my tftp with the following commands:
