Posted: Fri Feb 20, 2009 16:55 Post subject: WRT54G V5.0
I flashed my WRT54G V5.0 to this version and I'm getting major instability. Any ssh connection causes 100% cpu and then router freezes. Also freeses after about 5 minutes of web browsing. 1 computer, wired connection.
Here are the steps I took to get here:
1. Flash to latest linksys firmware
2. Flash vxworks_prep then VXworks Killer
3. Flash dd-wrt micro
4. compress cfe
5. Flash dd-wrt micro plus ssh, the one from this thread.
I did 30/30/30 between each step but did not test performance until I was done with all steps.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Feb 20, 2009 17:15 Post subject: Re: WRT54G V5.0
zSandman wrote:
I flashed my WRT54G V5.0 to this version and I'm getting major instability. Any ssh connection causes 100% cpu and then router freezes. Also freeses after about 5 minutes of web browsing. 1 computer, wired connection.
Here are the steps I took to get here:
1. Flash to latest linksys firmware
2. Flash vxworks_prep then VXworks Killer
3. Flash dd-wrt micro
4. compress cfe
5. Flash dd-wrt micro plus ssh, the one from this thread.
I did 30/30/30 between each step but did not test performance until I was done with all steps.
Just flashed, did "Factory Reset" form web gui before and after the flash. As soon as I entered all my settings and rebooted something happened to it. I can ping it but no web, ssh, telnet or DHCP.
I'm doing this remotely, (not through this router,) so I can't physically reboot it. Will try again when I get home.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Mon Mar 23, 2009 20:39 Post subject: Re: Latest version
SSH_wanted wrote:
GREAT!
Do you recommand latest version dd-wrt.v24-11779_NEWD_micro-plus_ssh.bin?
Is it more stable? PPPoE still supported?
I don't use a PPPoE connection (acutally, my connection type shows disable since I have my micro_plus_ssh build on a Repeater Bridge)
But...the 11296 is one of the most stable builds. 11779 is a bit rocky still. I have it running on my G2V1 unit and so far all is well...but this build has some UPnP issues and it does some strange things when you first try to flash it.
Sometimes I got "Upgrade Failed" messages and had to use JTAG to recover...but that was only on Std and Nokaid builds....so I guess it isn't relevant to your question.
I suggest you load up the 11296 build and stick with that for now.
redhawk _________________ The only stupid question....is the unasked one.