Posted: Mon Mar 09, 2009 18:30 Post subject: Compex np27g/adm5120
Hello !
does anybody succeed in flashing compex np27g ?
I tried to flash using np28g dd-wrt fw, cause np28g is the most close to 27g. it has the same chip&flash size. differences are only 4 ethernet ports in 27g instead of 3 and 2xusb1.1 vs usb2.0
So I tried to upload new fw using tftp in recovery mode (power down-hold reset sw-power up and than tftp). file was uploaded sucessful but w/o any result. no flashing goes after that.
have u tried every port to connect to 192.168.1.1?
can u give us a high res picof the bord so that we can see which switch and hw is used? _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
you see, the problem is not in connection to router. I can upload dd-wrt fw to device by tftp using recovery mode and firmware is uploaded sucessful. but firmware is not flashing to device after that, it just stays with old original firmware.
lets wait what BS will say _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
can u give us a serial log? _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
Joined: 06 Jun 2006 Posts: 5778 Location: Dresden, Germany
Posted: Wed Apr 22, 2009 21:00 Post subject:
you cannot flash a np27 with a np28 firmware. compex uses always different firmware headers for each device.
good example is wp54g,wpp54g,wp54ag,wpp54ag. all devices identical, but different firmwares required _________________ one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.
DD-WRT supported Concerts @ Bunker Dresden
6.4. - Black Celebration Depeche Mode Fanmeeting LIVE: Blind Passenger vs. Modular Majesty
28.6. - Fixmer & McCarthy
17.8. - Frontline Assembly & Haujobb
Joined: 06 Jun 2006 Posts: 5778 Location: Dresden, Germany
Posted: Wed Apr 22, 2009 21:11 Post subject:
use the attached experimental file for the np27g _________________ one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.
DD-WRT supported Concerts @ Bunker Dresden
6.4. - Black Celebration Depeche Mode Fanmeeting LIVE: Blind Passenger vs. Modular Majesty
28.6. - Fixmer & McCarthy
17.8. - Frontline Assembly & Haujobb
we had no testers yet. so we dont know if the switch is working ok. if u would like to test and report drop me a pm with your activation code from the gui and i will take care
Sorry, is it possible to find some instructions for that?
The router seems to be working (by lights)
- It's not possible to connect to the router by ethernet (no ip-adress)
- It's not possible to retrieve a "normal" IP through "need activation" USSID as well.
Thank you.
_________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
does wireshark see anything when the unit boots? _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
what does the serial console log print? _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
try to
upgrade to the latest build after the activation an tell me if its working
Now I've upgraded to V24 PreSP2 - 13064
There are 4 Ethernet ports in np27g + 1 WAN port
So I turned off Firewall and tried to ping all of them.
2 ports are working like Ethernet ports (DHCP is working on them and 192.168.1.1 is pingable)
2 ports does not work (no DCHP, not ping of 192.168.1.1 if I assign address manually)
1 WAN port also does not work
So I'm not able to locate WAN port now from these 5 ports, it's seems to me that WAN is assigned not correct
for the wan port be sure that the wan port is disabled in gui so its added to the switch.
what i need is a
Code:
dmesg
and
Code:
lspci
from the commandline _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
The router fails to flash the firmware all versions listed in the database (tried both tpft and web gui)...the file loads up to 99% and then returns the message "corrupted or bad file etc...." Tried with 3 browsers incl IE8.
read the guidelines _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Its not that hard to throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
TP-Link (Atheros) debrick service in EU
