Posted: Tue Oct 10, 2006 6:52 Post subject: WVR-G54-NF reset factory defaults is of no effect
nvram_commit(): end
eth1: No such process
Receiving restore command from web ...
Receiving restore command from web ...
http(s)d: nothing to do...
Restarting system.
Please stand by while booting the system...
Flash type "TC58FVM6T2AFT65 8Mx8 TopB"
Main(0) NVRAMs Bad!
Sub(bc7e8000) NVRAM is good
dst=bc7f8000 src=bc7e8000 len=32768
Erase of block 0x007f8000-0x007fa000 done
Erase of block 0x007fa000-0x007fc000 done
Erase of block 0x007fc000-0x007fe000 done
Erase of block 0x007fe000-0x00800000 done
Writing 0x8000 bytes to flash @0xbc7f8000 ...
Flash wsite succeeded
Flash type "TC58FVM6T2AFT65 8Mx8 TopB"
Main(bc7f8000) NVRAM is good
Sub(bc7e8000) NVRAM is good
>nvram_s_ncdl : Update sdram_ncdl.
cur_ncdl=10507
initial_sr=500000
start memory test (start=80400000 size=03c00000(61440KB) end=84000000)
start adrstest (size=0x3c00000 adr=0x80400000)
checking...
start pattern test 0
checking...
end
Flash type "TC58FVM6T2AFT65 8Mx8 TopB"
---- MELCO ---
PMON version 5.3.22 [EL], LSI LOGIC Corp. and Broadcom Corp.
Compiled on Tue Mar 2 15:08:31 2004
CPU typg 4704. Rev 8.
CPU clock frequency 264 MHz.Avail RAM 65536 KBytes.
NVRAM: TC58FVM6T2AFT65 8Mx8 TopB.
Visit www.carmel.com for updates.
PMON 3.51.5.0-MEL1.0_005
Using specified MAC address.
et0: etc47xx.c :ch_phytest phyadlr=0 id=0040 6332
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.54.5.0
MAC Address: 00:0d:0b:0d:0d:1e
Opened ethernet
Downloading from ethernet, ^C to abort
Downloading os image in 3 seconds
Downloading image time out
Boot os from the flash
Now checking CRC...
CRC OK
Uncompressing....done
>FlashUnlockBlockForINTEL28FxxxC3
support Intel-28FxxxC3 only.
Doing command call 80001000
CPU revision is: 00029006
Linux version 2.4.34-pre2 (wwwrun@dbserver) (gcc version 3.4.6 (OpenWrt-2.0)) #676 Mon Oct 9 06:48:40 CEST 2006
Setting the PFC value as 0x15
Determined physican RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:`noinitrd console=ttyS0,115200 root=/dev/mtdblock2 panic=1
CPU: BCM4704 rev 8 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 263.78 BogoMIPS
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_IPV4OPTSSTRIP loaded
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
VFS: Mounted root (squashfs filesystem) readonly.
We got unknown board...
PCI: Enabling device 01:01.0 (0004 -> 0006)
eth2: Broadcom BCM4320 802.11 Wireless Controller 3.90.39.0
nvram_commit(): end
br0: No such file or directory
eth0: Operation not supported
eth0: Operation not supported
eth0: Operation not supported
eth0: Operation not supported
eth0: Operation not supported
eth0: Operation not supported
eth0: Operation not supported
br0: Operation not supported
eth2: Argument list too long
Write wireless mac fail : : Device or resource busy
sizu: 21208 bytes (11560 left)
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
iptables-restore /tmp/.ipt
ppp0: No such device
eth1: No such process
sh: /tmp/.rc_startup: not found
: /etc/init.d/rcS: /etc/init.d/rcS: 4: /etc/init.d/S*: not found
/etc/config/pptpd_client.startup: /etc/config/pptpd_client.startup: 14: /tmp/pptpd_client/vpn: not found