Прошивается но не работает DIR-300

Post new topic   Reply to topic    DD-WRT Forum Index -> Оборудование на основе Atheros WiSOC
Author Message
lider404
DD-WRT Novice


Joined: 08 Jun 2008
Posts: 27

PostPosted: Thu Jan 15, 2009 21:45    Post subject: Прошивается но не работает DIR-300 Reply with quote
При попытке откатиться на оригинальную прошивку ошибся выбрав не тот файл прошивки. После этого роутер перестал грузиться. В оригинальной прошивке горят только 2 лампочки (Power и WAN). Защел в Redboot, попробовал прошиться в dd-wrt. Вот лог



DD-WRT> fis init -f
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xbfc30000-0xbffe0000: ..........................................
.................
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT> ip_address -h 192.168.1.2
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.2
DD-WRT> load -r -b %{FREEMEMLO} ap61.rom
Using default protocol (TFTP)
Raw file loaded 0x80080000-0x800a8717, assumed entry at 0x80080000
DD-WRT> fis create -l 0x30000 -e 0xbfc00000 RedBoot
An image named 'RedBoot' exists - continue (y/n)? y
... Erase from 0xbfc00000-0xbfc30000: ...
... Program from 0x80080000-0x800a8718 at 0xbfc00000: ...
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT>reset





DD-WRT> ip_address -h 192.168.1.1
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.1
DD-WRT> load -r -b 0x80041000 linux.bin
\

Using default protocol (TFTP)
TFTP timed out 1/15
Can't load 'linux.bin': operation timed out
DD-WRT> ** Error: Illegal command: "\"
DD-WRT> DD-WRT> ip_address -h 192.168.1.2
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.2
DD-WRT> load -r -b 0x80041000 linux.bin
Using default protocol (TFTP)
Raw file loaded 0x80041000-0x803d5fff, assumed entry at 0x80041000
DD-WRT> fis create linux
... Erase from 0xbfc30000-0xbffc5000: ..........................................
................
... Program from 0x80041000-0x803d6000 at 0xbfc30000: ..........................
................................
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT> fconfig boot_script true
boot_script: Setting to true
DD-WRT> fconfig boot_script_timeout 4
boot_script_timeout: Setting to 4
DD-WRT> fconfig
Run script at boot: true
Boot script:
.. fis load -l linux
.. exec
Enter script, terminate with empty line
>> fis load -l linux
>> exec
>>
Boot script timeout (1000ms resolution): 4
Use BOOTP for network configuration: false
Gateway IP address:
Local IP address:
Local IP address mask:
Default server IP address:
Console baud rate: 9600
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0xbffe0000-0xbfff0000: .
... Program from 0x80ff0000-0x81000000 at 0xbffe0000: .
DD-WRT>reset


После этого роутер работает как свитч (На Lan получает IP с WAN интерфейса и заходит в консоль для прошивки). Помогите. Что можно сделать?
Sponsor
lider404
DD-WRT Novice


Joined: 08 Jun 2008
Posts: 27

PostPosted: Fri Jan 23, 2009 18:42    Post subject: Reply with quote
Нашел решение
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=39290&postdays=0&postorder=asc&highlight=http+rayer+++programm+spipgm+zip&start=15
ЧИТАЙТЕ. Если что пишите pm.
cf8
DD-WRT Novice


Joined: 27 Jul 2009
Posts: 1

PostPosted: Mon Jul 27, 2009 6:58    Post subject: Reply with quote
lider404 wrote:
Нашел решение
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=39290&postdays=0&postorder=asc&highlight=http+rayer+++programm+spipgm+zip&start=15
ЧИТАЙТЕ. Если что пишите pm.


Думаю речь идет о восстановлении убитого board_config'a? Делал все как здесь http://www.shadowandy.net/2007/10/flashing-dir-300-back-to-original-firmware.htm - результат тотже, только теперь оригинальная прошивка грузится нормально, есть только проблемы с MAC адресами интерфейсов(?), а dd-wrt по прежнему ребутится после старта.

Можешь озвучить детальнее, что делал ты?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Оборудование на основе Atheros WiSOC All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum