Is there any news on this Belkin N1 Vision F5D8232-4 ???
I opened mine yesterday and solder some pins for serial connection and i measure 3.3v on it and for the terminal connection you have to set 115200 baud.
This is the result:
Quote:
où
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 18:05:46, Jun 21 2007
Compiled by root@localhost.localdomain
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: pb42
RAM: 0x80000000-0x81000000, [0x80032d60-0x80ff4000] available
FLASH: 0xbf000000 - 0xbf400000, 64 blocks of 0x00010000 bytes each.
in Init LCD now.
Chance for pushing button, 2 seconds time out!
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exe
Now booting linux kernel:
Base address 0x80050000 Entry 0x8024e000
Linux version 2.6.15--LSDK-6.1.1.65 (asraul@localhost.localdomain) (gcc version 3.4.4) #1 Fri Apr 11 03:54:27 CST 2008
flash_size passed from bootloader = 4
arg 1: console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init mem=16M
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init mem=16M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 128 (order: 7, 2048 bytes)
Using 200.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13508k/16384k available (1622k kernel code, 2876k reserved, 349k data, 108k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
AR7100 GPIOC major 0
squashfs: version 3.1 (2006/08/19) Phillip Lougher
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
Add static partition for flash bank 0
Creating 4 MTD partitions on "ar7100-nor0":
0x00000000-0x00020000 : "RedBoot"
0x00020000-0x00030000 : "Nvram"
0x00030000-0x00130000 : "Kernel"
0x00130000-0x00400000 : "FileSystem"
Netfilter messages via NETLINK v0.30.
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
GRE over IPv4 tunneling driver
ip_conntrack version 2.4 (128 buckets, 1024 max) - 236 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
ip_nat_pptp version 3.0 loaded
ip_tables: (C) 2000-2002 Netfilter core team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 108k freed
init started: BusyBox v1.00 (2008.03.31-01:40+0000) multi-call binary
init started: BusyBox v1.00 (2008.03.31-01:40+0000) multi-call binaryAlgorithmics/MIPS FPU Emulator v1.5
I bought the modem router as I had moved to adsl2+ what a failure.
Old router stats on adslmax draytek 2800vgr
adsl stat
--------------------------- ATU-R Info (annex A) ----------------------------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 7200000 bps US Actual Rate : 832000 bps
DS maximum Rate : 7200000 bps US maximum Rate : 832000 bps
DS Path Mode : Fast US Path Mode : Fast
NE Current Attenuation : 31.5 dB Cur SNR Margin : 9.0 dB
DS actual PSDM(C) : 00000000 US actual PSDM(R) : 00000000
ADSL Firmware Version : E.67.2.55
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 17.5 dB Far SNR Margin : 13.0 dB
CO ITU Version[0] : 00000000 CO ITU Version[1] : 00000000
DSLAM CHIPSET VENDOR : < Unknown >
Total time = 1 days 2 hours 32 min 51 sec
SF = 5906561
CRC = 1909
LOS = 4
LOF = 27
ES = 206
Latest 1 day time = 2 hours 32 min 51 sec
SF = 568684
CRC = 3
LOS = 0
LOF = 0
ES = 3
Latest 15 minutes time = 2 min 51 sec
SF = 10635
CRC = 0
LOS = 0
LOF = 0
ES = 0
Previous 15 minutes time = 15 min 0 sec
SF = 55848
CRC = 0
LOS = 0
LOF = 0
ES = 0
Previous 1 day time = 24 hours 0 sec
SF = 5337877
CRC = 1906
LOS = 4
LOF = 27
ES = 203
15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
SF = 55786
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
SF = 55849
CRC = 1
LOS = 0
I notice at has changed which could be due to split for LLU but still think 5meg is a bit low for max speed which the Belkin seems only able to deliver.
Has there been any progress on this router?
I have it sitting here and its useless.
Really need WDS on it, but both belkin and this router suck so I cant get anywhere.
Can someone please update us on this, its quite highly demanded
Alright,
lets get this thread going. The HackedExistence team has successfully hacked the N1 Vision LCD. Were still working out some code, so be patient, but we will be releasing details soon. Check out the teaser pic on the Projects page at http://hackedexistence.com
If you are actively developing for the N1 and have something to contribute, please drop me an email.
Very good to hear that develop is finally going somewhere. I have this router for over a year now and I'm really really done with it. Have tried a Linksys WRT54GLS with DD-WRT but it is to slow for my connection, it only gets 50% of the total WAN bandwidth possible.
Nice going r3dfish!
Hope DD-WRT will run on this router soon, but I know that there is still a long way to go offcourse.
Posted: Thu Oct 01, 2009 5:08 Post subject: Belkin Wireless N1 Vision ADSL2+ Modem Router F5D8632
Hey guys, great work on DD-WRT, it's such an improvement on most of the current firmware options!
I'd love to see it ported, or running on the Belkin Wireless N1 Vision ADSL2+ Modem Router F5D8632. There's a lot of people out there with them and a big demand for this to work.
I'm not a fan of Belkin, but 802.11N, Gigabit LAN, Modem and LIFETIME warranty are hard to pass up. Don't care if the LCD is working on DD-WRT or not, it's all about the function. To be honest, don't need it as the modem at the moment, so if that's another hold up, I'd be happy to sacrifice that feature.
Keep up the good work and hopefully we'll see it on the N1 Visions at some stage.
Here are the pin outs if anyone else wants to try:-
Code:
-----------------------------------------------
¦
¦
¦ o o o o
¦ +3v R/X T/X GND
¦
¦
¦
¦
¦
¦ (115200 Board Rate)
Here is the output from the console running firmware F5D8232-4_WW_1.00.16 boot version 1.02 :-
Code:
�o�
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 18:05:46, Jun 21 2007
Compiled by root@localhost.localdomain
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: pb42
RAM: 0x80000000-0x81000000, [0x80032d60-0x80ff4000] available
FLASH: 0xbf000000 - 0xbf400000, 64 blocks of 0x00010000 bytes each.
in Init LCD now.
Chance for pushing button, 2 seconds time out!
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> boot;exe
Now booting linux kernel:
Base address 0x80050000 Entry 0x8024e000
Linux version 2.6.15--LSDK-6.1.1.65 (asraul@localhost.localdomain) (gcc version 3.4.4) #1 Tue Aug 5 16:59:19 CST 2008
flash_size passed from bootloader = 4
arg 1: console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init mem=16M
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/sbin/init mem=16M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 128 (order: 7, 2048 bytes)
Using 200.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13508k/16384k available (1622k kernel code, 2876k reserved, 349k data, 108k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
AR7100 GPIOC major 0
squashfs: version 3.1 (2006/08/19) Phillip Lougher
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
Add static partition for flash bank 0
Creating 4 MTD partitions on "ar7100-nor0":
0x00000000-0x00020000 : "RedBoot"
0x00020000-0x00030000 : "Nvram"
0x00030000-0x00130000 : "Kernel"
0x00130000-0x00400000 : "FileSystem"
Netfilter messages via NETLINK v0.30.
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
GRE over IPv4 tunneling driver
ip_conntrack version 2.4 (128 buckets, 1024 max) - 236 bytes per conntrack
ip_conntrack_ppt1 loaded
ip_nat_pptp version 3.0 loaded
ip_tables: (C) 2000-2002 Netfilter core team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 108k freed
init started: BusyBox v1.00 (2008.03.31-01:40+0000) multi-call binary
init started: BusyBox v1.00 (2008.03.31-01:40+0000) multi-call binaryAlgorithmics/MIPS FPU Emulator v1.5