I tried working with the stock firmware, but I'm afraid after using DD-WRT for years I've become spoiled. From what I can tell it has the same chipset as the Buffalo router? I guess the only question is how much flash space is available...any ideas? I'd like to try it. It was pretty cheap ($25-30 I think), so if there aren't any easy ways I'd be willing to crack it open (have many G routers, just wanted N).
Minus the jtag stuff, all of the information should be there. I looked through the database last night, couldn't find the chips installed on the board. I did take pictures. FCC ID and other info is in the first two posts.
Hey, any luck with this router yet? I am looking into getting one of these and I really love the DD-WRT firmware. Is this a good router even without the DD-WRT firmware? Is the distance really good as I would like it to reach into my garage?
It seams like it is just a re-branded EnGenious ESR-9752. Should be easy to support in general with the Ralink 3052.
If in fact it is the same as a EnGenious ESR-9752 then it's requires activation and is supported according to the http://www.dd-wrt.com/site/support/router-database _________________
ASUS AC3200
Linksys WRT32X
Linksys WRT3200 ACM
It seams like it is just a re-branded EnGenious ESR-9752. Should be easy to support in general with the Ralink 3052.
Just pointing something out.
If you open the RF Exposure Report (at the above FCC link) and look at the first few lines (Model No.), the RNX model is grouped with the ESR model.
So they could likely be the same exact unit, just re-branded for Rosewill.
But that would also mean, as Mordak points out, a user would have to pay to activate Professional DD-WRT on it.
I guess this thread can be moved to the Senao Devices forum.
And DD-WRT can add another router to its tentatively Supported Devices list. _________________ .
.
Get off my channel, or face the wrath of my 2.4Ghz Wireless-N channel-bonded 40Mhz wide-band interference!
My routers:
- 1 Linksys E3000
- 4 Linksys E2000
- 4 Linksys WRT320n [DD-WRT svn13575 std-nokaid] working well in WDS setup, 5Ghz N-speeds only.
- 2 Airlink AR670W [DD-WRT build 14537] working well in WDS setup, 2.4Ghz N-speeds only.
- 2 Netgear WDNR3300 [DD-WRT svn13577 std-nokaid] working well in AP-Repeater-Bridge setup, 5Ghz N-speeds only.
- Airlink AR325W G-router and Belkin F5D7230-4 v1444 [DD-WRT v23 sp2 micro] working well in Repeater-Bridge setup, G-speeds only.
- D-Link DI-614+ B-router, sitting around, wanna buy it?