Rosewill RNX-Easy4N

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6  Next
Author Message
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Thu Nov 05, 2009 0:56    Post subject: Rosewill RNX-Easy4N Reply with quote
I just got this router in today:

http://www.rosewill.com/products/s_1281/productDetail.htm

I tried working with the stock firmware, but I'm afraid after using DD-WRT for years I've become spoiled. From what I can tell it has the same chipset as the Buffalo router? I guess the only question is how much flash space is available...any ideas? I'd like to try it. It was pretty cheap ($25-30 I think), so if there aren't any easy ways I'd be willing to crack it open (have many G routers, just wanted N).

What do you DD-WRT folks think?

*edit*

Said what the hell and cracked it open. Pics attached.
www.georgegibson.net/pictures/chip1.jpg
www.georgegibson.net/pictures/chip2.jpg


Last edited by Gibby82 on Thu Nov 05, 2009 8:32; edited 3 times in total
Sponsor
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Thu Nov 05, 2009 1:37    Post subject: Compiled Information Reply with quote
Ralink 3052
FCC ID U2M-SR97908003
RNX-EasyN4 2T2R version
Chips: MX ???, EtronTech EM53A165TS-6G


Last edited by Gibby82 on Thu Nov 05, 2009 23:03; edited 2 times in total
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Thu Nov 05, 2009 21:52    Post subject: Reply with quote
Any interest in this?
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17487
Location: Hesse/Germany

PostPosted: Thu Nov 05, 2009 22:39    Post subject: Reply with quote
do
http://dd-wrt.com/site/support/router-detection

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Thu Nov 05, 2009 22:58    Post subject: Reply with quote
Sash wrote:
do
http://dd-wrt.com/site/support/router-detection


Minus the jtag stuff, all of the information should be there. I looked through the database last night, couldn't find the chips installed on the board. I did take pictures. FCC ID and other info is in the first two posts.
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Thu Nov 05, 2009 23:14    Post subject: Reply with quote
Found a model(?) number on the board: ESR-9752-1.00

Did a quick search and found:

http://www.senao-me.ae/index.php?module=productdescription&productid=59&parentcategory=2&childcategory=17

http://www.4netonline.com/on/index.php?target=products&product_id=657

After that, found this:

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=54802&highlight=senao+esr9752

Mine looks exactly the same.
Mordak
DD-WRT Guru


Joined: 27 Dec 2007
Posts: 931
Location: Orange, MA

PostPosted: Fri Nov 06, 2009 1:22    Post subject: Re: Compiled Information Reply with quote
Gibby82 wrote:
Ralink 3052
FCC ID U2M-SR97908003
RNX-EasyN4 2T2R version
Chips: MX ???, EtronTech EM53A165TS-6G
I couldn't find it at the FCC ID search site: http://www.fcc.gov/oet/ea/fccid/ Weird. Confused
_________________

6 X WRT54G-TM
1 X WRT54G V1.0
1 X WRT54G V2.2
1 X WRT54G V5.0
2 X WRT54GS V1.0
2 X WRT54GS V1.1
1 X WRT54GS V2.0
1 X WRT160NL v1.0
1 X WRT320N
2 X WRT350N
1 X WRT600N v1.0
2 X WRT610N v1.0
1 X E1500
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Fri Nov 06, 2009 2:33    Post subject: Re: Compiled Information Reply with quote
Mordak wrote:
Gibby82 wrote:
Ralink 3052
FCC ID U2M-SR97908003
RNX-EasyN4 2T2R version
Chips: MX ???, EtronTech EM53A165TS-6G
I couldn't find it at the FCC ID search site: http://www.fcc.gov/oet/ea/fccid/ Weird. Confused


Yeah, I noticed that too. Maybe the paperwork hasn't gone through? *shrugs*
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Fri Nov 06, 2009 2:55    Post subject: Reply with quote
Going to try the Senao build. Wish me luck.
Gibby82
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Fri Nov 06, 2009 3:47    Post subject: Reply with quote
Senao build-no go via Web. Serial might be the only way.
linux-usr
DD-WRT Novice


Joined: 30 Nov 2009
Posts: 1

PostPosted: Mon Nov 30, 2009 16:24    Post subject: Reply with quote
Hey, any luck with this router yet? I am looking into getting one of these and I really love the DD-WRT firmware. Is this a good router even without the DD-WRT firmware? Is the distance really good as I would like it to reach into my garage?
zerofire
DD-WRT User


Joined: 20 Nov 2009
Posts: 92
Location: United States

PostPosted: Mon Nov 30, 2009 18:13    Post subject: Reply with quote
I found the unit description from the FCC.
Here:
https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=839643&fcc_id=%27U2M-SR97908003%27

It seams like it is just a re-branded EnGenious ESR-9752. Should be easy to support in general with the Ralink 3052.

_________________
Linksys WRT350Nv1 x1 DD-WRT v24-preSP2 14311
Linksys WRT54G2v1 x1 DD-WRT v24-preSP2 14311
Linksys WRT54G2v1 x1 Linksys OEM
Linksys EG008Wv3 x1
Linksys WRT54Gv3.1 x1 Linksys OEM
Linksys WRT54Gv5 x1 Linksys OEM
Linksys WRT54Gv6 x2 Linksys OEM
Linksys WRT54Gv8 x2 Linksys OEM
Linksys WTR54GSv1 x1 Linksys OEM
Linksys WRT160Nv1 x1 Linksys OEM
NetGear WNR834Bv2 x1 NetGear OEM
NetGear WG302v2 x1 Netgear OEM
Belkin F5D7230-4v1000 x1 Belkin OEM
Buffalo WHR-G300N x1 DD-WRT sp2
Buffalo WHR-G300N x1 Buffalo OEM
Airlink 101 AR430Wv1 x1 Airlink OEM
Cisco Catalyst 3548 Enterprise x1 Cisco IOS
D-Link DI-604vE x1 D-Link OEM
Mordak
DD-WRT Guru


Joined: 27 Dec 2007
Posts: 931
Location: Orange, MA

PostPosted: Mon Nov 30, 2009 18:26    Post subject: Reply with quote
zerofire wrote:
I found the unit description from the FCC.
Here:
https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=839643&fcc_id=%27U2M-SR97908003%27

It seams like it is just a re-branded EnGenious ESR-9752. Should be easy to support in general with the Ralink 3052.
If in fact it is the same as a EnGenious ESR-9752 then it's requires activation and is supported according to the http://www.dd-wrt.com/site/support/router-database
_________________

6 X WRT54G-TM
1 X WRT54G V1.0
1 X WRT54G V2.2
1 X WRT54G V5.0
2 X WRT54GS V1.0
2 X WRT54GS V1.1
1 X WRT54GS V2.0
1 X WRT160NL v1.0
1 X WRT320N
2 X WRT350N
1 X WRT600N v1.0
2 X WRT610N v1.0
1 X E1500
bbb_forever
DD-WRT User


Joined: 10 Oct 2009
Posts: 202

PostPosted: Tue Dec 01, 2009 3:04    Post subject: Reply with quote
zerofire wrote:
I found the unit description from the FCC.
Here:
https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=839643&fcc_id=%27U2M-SR97908003%27

It seams like it is just a re-branded EnGenious ESR-9752. Should be easy to support in general with the Ralink 3052.


Just pointing something out.

If you open the RF Exposure Report (at the above FCC link) and look at the first few lines (Model No.), the RNX model is grouped with the ESR model.

So they could likely be the same exact unit, just re-branded for Rosewill.

But that would also mean, as Mordak points out, a user would have to pay to activate Professional DD-WRT on it.

I guess this thread can be moved to the Senao Devices forum.

And DD-WRT can add another router to its tentatively Supported Devices list.

_________________
.
.
Get off my channel, or face the wrath of my 2.4Ghz Wireless-N channel-bonded 40Mhz wide-band interference!

My routers:
- 1 Linksys E3000
- 4 Linksys E2000
- 4 Linksys WRT320n [DD-WRT svn13575 std-nokaid] working well in WDS setup, 5Ghz N-speeds only.
- 2 Airlink AR670W [DD-WRT build 14537] working well in WDS setup, 2.4Ghz N-speeds only.
- 2 Netgear WDNR3300 [DD-WRT svn13577 std-nokaid] working well in AP-Repeater-Bridge setup, 5Ghz N-speeds only.
- Airlink AR325W G-router and Belkin F5D7230-4 v1444 [DD-WRT v23 sp2 micro] working well in Repeater-Bridge setup, G-speeds only.
- D-Link DI-614+ B-router, sitting around, wanna buy it?

Recent fixes timeline:
http://svn.dd-wrt.com:8000/dd-wrt/timeline?from=01%2F11%2F2010&daysback=30&changeset=on&update=Update

Linksys 320n Path: Downloads › others › eko › V24-K26 › svn13575

Airlink AR670W Path: Downloads › others › eko › BrainSlayer-V24-preSP2 › 12-28-09-r13525 › airlink101-ar670w
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17487
Location: Hesse/Germany

PostPosted: Tue Dec 01, 2009 20:50    Post subject: Reply with quote
ha somebody already tried to flash the senao build?
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Goto page 1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 1 of 6
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum