And it probably won't be supported unless someone first donates and sends a unit to them, so they can create a build and test it. _________________ .
.
Get off my channel, or face the wrath of my 2.4Ghz Wireless-N channel-bonded 40Mhz wide-band interference!
My routers:
- 1 Linksys E3000
- 4 Linksys E2000
- 4 Linksys WRT320n [DD-WRT svn13575 std-nokaid] working well in WDS setup, 5Ghz N-speeds only.
- 2 Airlink AR670W [DD-WRT build 14537] working well in WDS setup, 2.4Ghz N-speeds only.
- 2 Netgear WDNR3300 [DD-WRT svn13577 std-nokaid] working well in AP-Repeater-Bridge setup, 5Ghz N-speeds only.
- Airlink AR325W G-router and Belkin F5D7230-4 v1444 [DD-WRT v23 sp2 micro] working well in Repeater-Bridge setup, G-speeds only.
- D-Link DI-614+ B-router, sitting around, wanna buy it?
Looks good :
The DIR-685 has 64 MB of RAM and 32 MB of flash and a 2x2 draft 802.11n radio based on a Ralink RT2880F 2T3R MAC/BB and RT2850L 2.4/5 GHz 2T3R transceiver. The radio, however, is locked to single-band 2.4 GHz operation. The processor could not be determined due to a soldered-in radio module over an RF shield. It does not appear Ubicom-based, however, since Ubicom's signature automatic QoS features are not present in the 685.
Posted on the back of the DIR-685 router, and on the inside, is FCC-ID RRK-WMPND02A1. I checked this FCC-ID at FCC.gov and it doesn't show up.
Since the radio module is soldered in over the CPU you can't tell what it is by examination, however according to a post on dsl-reports it seems to be a Ralink RT2880F PU 266MHz with 64MB RAM and 32MB Flash.
I'm linking several hi res pictures I took of the insides to see if this will help. I have one of these that I'm not using right now as I have replaced it with a Belkin that will run dd-wrt! Will be happy to try any build on it if someone is nice enough to try one. I don't have a jtag cable, but I'm going to order one today so I can get more info on this great router.
interface ra0 does not exist!
joel disable stun ..
[/etc/scripts/network_usb.sh] start...
insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/sxuptp.ko
alloc success ffc7c000 dma 7560000
alloc success ffc9c000 dma 7580000
insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/sxuptp_generic.ko
usbcore: registered new driver sxuptp_generic
insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/jcp.ko
insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/jcp_cmd.ko
start LAN ...
[/etc/templates/lan.sh] ...
[/var/run/lan_start.sh] ...
Start LAN (br0/192.168.0.1/255.255.255.0)...
Start DHCP server (br0) ...
Start igmp ...
[/etc/templates/igmpproxy.sh] start ...
[/var/run/igmpproxy_start.sh] ...
igmp snooping is disabled ...
IGMP proxy is not enabled!
enable LAN ports ...
[/etc/scripts/enlan.sh] ...
!!!!!!!!!!!!!!! TODO [/etc/scripts/enlan.sh] !!!!!!!!!!!!!!
start WLAN ...
[/etc/templates/wlan.sh] start ...
[/etc/templates/wifi/wlan_sch.sh] stop ...
Hello from hostapd.ra0.conf
[/var/run/wlan_start.sh] ...
Start WLAN interface ra0 ...
[/etc/templates/wps.sh] pre_setie ...
GMAC-1 link down
ralink_init: Initiating ralink_wireless_event_init...
Using interface ra0 with hwaddr 00:26:5a:23:16:6a and ssid 'Gate'
=>=>=> set ssid to Gate
start Application ...
[/usr/sbin/submit] GROUP_ADD ...
GMK - hexdump(len=32): cc cc f8 67 68 90 28 94 5b 9f 2d 54 d6 b4 3e c5 0f a1 c7 d2 0d 68 14 41 be fd ba 4e 81 51 43 bc
GTK - hexdump(len=32): f4 ae 0b 6c b8 44 a3 6a f9 1b 91 ef 0c 2c 31 21 1d 41 dc 1b 3e 53 75 7a 8b 05 b3 0b 38 e9 f0 96
hostapd_setup_interface: return 0
[/usr/sbin/submit] USER_ADD ...
[/usr/sbin/submit] PURE-FTPD ...
[/etc/templates/user.sh] ...
[/usr/sbin/submit] NET_ACCESS ...
[/etc/templates/pure_ftpd.sh] ...
[/var/run/user_add.sh] ...
rm: cannot remove `/var/smbpasswd[/etc/templates/group.sh] ...
[/var/run/group_add.sh] ...
': No such file or directory
Start smbd...
[/usr/sbin/submit] UPNP_AV_START ...
[/usr/sbin/submit] ITUNES_START ...
[/etc/templates/upnp_av.sh] ...
pure_ftpd is disabled !
[/var/run/upnp_av_start.sh] ...
No: [/var/run/prescan_start.sh] ...
[/etc/templates/network_access.sh] ...
not found
Upnp-av server is disabled !
[/usr/sbin/submit] BT_START ...
[/etc/templates/itunes_server.sh] ...
start Guest Zone
[/etc/templates/bt.sh] ...
[/etc/templates/gzone.sh] ...
[/var/run/bt_start.sh] ...
generate_start !
BT is disabled !
[/var/run/itunes_server_start.sh] ...
No: not found
[/var/run/gzone_start.sh] ...
[/var/run/network_access_start.sh] ...
Start smbd...
[/etc/templates/enable_gzone.sh] ...
[/var/run/enable_gzone_start.sh] ...
start RG ...
add passwd from file
[/etc/templates/rg.sh] start ...
[/var/run/rg_start.sh] ...
startsmbfilepwent_internal: file /var/smbpasswd did not exist. File successfully created.
Added user nobody.
Using /lib/modules/ifresetcnt.ko
insmod: cannot insert `/lib/modules/ifresetcnt.ko': File exists (-1): File exists
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_conntrack_ike_m.ko: no module by that name found
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_conntrack_esp_m.ko: no module by that name found
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_conntrack_proto_esp_m.ko: no module by that name found
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_nat_proto_esp_m.ko: no module by that name found
iptables: No chain/target/match by that name
sendto_unsock(/var/run/portt.unixsocket, flush)
/proc/sys/net/ipv4/arp_flood_burst: cannot create
/proc/sys/net/ipv4/arp_flood_cost: cannot create
start DNRD ...
[/etc/templates/dnrd.sh] ...
[/var/run/dnsmasq_start.sh] ...
Start Dnsmasq ...
Start telnetd ...
start UPNPD ...
[/etc/templates/upnpd.sh] ...
[/var/run/upnpd_start.sh] ...
Starting UPnP ...
[/var/run/upnp_alive.sh] ...
start WAN ...
Set WAN port media type 0
rtl8366rb_setEthernetPHY port 4 type 0
[/etc/templates/wan.sh] start ...
[/var/run/wan_start.sh] ...
insmod: /lib/modules/2.6.15: No such file or directory
insmod: sw_tcpip.ko: no module by that name found
It is the DHCP mod start!!
Storlink eth1 address = 001E37DA242F
Can't find version control
GMAC-1 Flow Control Enable.
Storlink eth1 address = 001E37DA242F
Enable MAC Flow Control...
Clone WAN MAC : 00:aa:bb:cc:dd:ee
DHCP client on WAN(eth1) CloneMAC(00:aa:bb:cc:dd:ee) ...
start LLD2D ...
[/etc/templates/lld2d.sh] ...
[/var/run/lld2d_start.sh] ...
Start LLD2 daemon ...
start fcrss_server ...
[/etc/templates/fcrss_server.sh] start...
GMAC-1 link down
start Neaps ...
[/etc/templates/neaps.sh] start ...
[/var/run/neaps_start.sh] ...
Start Neap Server ...
start igmpproxy ...
[/etc/templates/igmpproxy.sh] start ...
[/var/run/igmpproxy_stop.sh] ...
IGMP proxy is not started !
[/var/run/igmpproxy_start.sh] ...
igmp snooping is disabled ...
IGMP proxy is not enabled!
start LCD Display ...
[/etc/templates/lcd_display.sh] ...
start Wake on LAN ...
[/etc/init.d/S10system.sh] done!
[/etc/templates/wol.sh] ...
rcS done!