Joined: 22 Jun 2008 Posts: 2440 Location: Am now Dark_Shadow
Posted: Fri Feb 12, 2010 21:04 Post subject: Linksys WRT400N Support
Spec's
CPU - Atheros AR7161 rev 2
CPU Speed - 680MHz
Flash - 8MB
Ram - 32MB
Antenna Connector - Internal
Port Count - 4 LAN, 1 WAN
Power - 12v1.5a
Radio Core Revision -
Radio Capabilities -
WLAN Standard - a/b/g/n
Frequency Band - 2.4Ghz/5Ghz
Number of Radios - 2
Running 14144
Still has constantly blinking wireless LED Ticket #1420
Still has LAN MAC sudo matching ath1's MAC Ticket #1435
Security LED still doesn't come on when security is set Ticket #1434
Site Survey for ath0 shows double and triple the SSID's for the same MAC address Ticket #1431
5ghz rate always says auto rather then actually speed Ticket #1436
Site Survey now works for ath1 (5GHz)
Running 14039
Lan Speed Test Results (if setting is not listed it is default)
5GHz - ath1
Wireless Network Mode - N-Only (5GHz)
Channel Width - Turbo (40MHz)
Control Channel - upper
Laptop w/ Linksys WPC600N
--------------------------Writing------------Reading
Packet Length:-------104,857,600------104,857,600
Time to complete:---17.3910000-------29.7180000
Bytes Per Second:---6,029,418--------3,528,420
Bits Per Seecond:---48,235,344-------28,227,360
Mbps:-----------------46.0008087-------26.9197083
Problems Seen thus far...
1. MAC address on mine are screwed up like my wrt600n. wl1 and LAN MAC are the same. They weren't in the Linksys firmware.
2. The wireless led blinks every 0.5-1 second without stop. just blinks and blinks and blinks, etc...
3. Posting across 2.4GHz Client Bridge right now. Bridged to wrt600n.
4. 5GHz Client Bridge very unstable, won't maintain connection with wrt600n. Keeps changing the channel when reconnecting. Maybe result of reconnection.
5. Upgrade went smooth. Haven't tested client connections to the wrt400n.
6. Wireless Security LED doesn't come on when security is set.
7. 5GHz is lacking channels when set as AP
Serial Output and chip identification _________________ The New Me
Last edited by DHC_DarkShadow on Thu Mar 25, 2010 12:44; edited 9 times in total
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Feb 15, 2010 19:18 Post subject:
support is possible if i get such a device _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 22 Jun 2008 Posts: 2440 Location: Am now Dark_Shadow
Posted: Tue Feb 16, 2010 0:41 Post subject:
BrainSlayer wrote:
support is possible if i get such a device
Hopefully some of the users here will help foot the bill for one, I would be willing to pitch in. Until that time, I am currently working with tornado on JTAG, so I am not afraid to try any build. If you would like to throw something my way in a PM, I can give it a shot.
If it's worth mentioning, I have serial TTL access to the router, so as long as the cfe doesn't get screwed I can bring it back.
Still would like to know if they are available in your area and how much they are verses buying one here and sending it to you. _________________ The New Me
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Wed Feb 17, 2010 17:11 Post subject:
DHC_DarkShadow wrote:
Anybody interested in chipping in to buy one for brainslayer?
@ BS how much are they in your area?
its not available in europe. just sold in US. but i ordered one on US already using my contacts. should arrive next week _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s