Japanese WZR-HP-G300N will not install dd-wrt.

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4 ... 10, 11, 12  Next
Author Message
psyphah
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 27

PostPosted: Fri Feb 19, 2010 5:36    Post subject: Reply with quote
Hrm. I'll try it tonight after I return home from work/had dinner ;)

I think the only way we'll get alternate firmware on these .jp models is to overwrite u-boot via the internal linux MTD interface. And that'll mean compiling our own customised u-boot and using dd to write it to the /dev/mtdX block device relevent to the u-boot image.

I'm going to dump the current u-boot image and the u-boot configuration settings. This should be straightforward since I have a root console to the device now.

From watching the initial device power up sequence I can see that buffalo have configured u-boot to disable any interruption to u-boot, so you can't get into a u-boot console and do stuff from there - u-boot will go through its initialisation then boot straight into the buffalo linux kernel.
Sponsor
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri Feb 19, 2010 8:13    Post subject: Reply with quote
yaiba wrote:
I try the new provided firmware from Brainslayer's post above and here is the serial output:

Quote:

cgi.c(3297) UploadCgi Mad:btpd STOP-SUCCESS (0 sec)
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gatedesc.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = ligd.gif
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = L3FwdSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateicfgSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateconnSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateinfoSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = messages
ip_nat_pptp version 3.0 unloaded
ip_conntrack_pptp version 3.1 unloaded
cgi.c(3512) UploadCgi Mad:MEMORY CHECK...
MidLayer.c(1914) ML_CheckMemory :X:MemFree = 38216
MidLayer.c(1918) ML_CheckMemory :X:Buffers = 3104
MidLayer.c(1922) ML_CheckMemory :X:Cached = 10900
MidLayer.c(1926) ML_CheckMemory :X:Active = 8624
MidLayer.c(1930) ML_CheckMemory :X:Inactive = 6368
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_klogd
killall: klogd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_klogd 24[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_nastorage
cannot open connection to btpd in //.btpd (No such file or directory).
killall: twonkymedia: no process killed
killall: twonkymediaserver: no process killed
rc_nastorage.c(1888) NastorageStop_BitTorrent2 Mad:btpd STOP-SUCCESS (0 sec)
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_nastorage 186[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_user_passwd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_user_passwd 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_usbmod
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_usbmod 138[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_dnrd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_dnrd 21[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoeroute
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoeroute 53[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_netwatchd
killall: netwatchd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_netwatchd 26[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter_simple
/tmp/ipfilter_simple_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter_simple 16[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_nat
/tmp/nat_rule_delete.sh: No such file or directory
/tmp/nat_group_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_nat 1074[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter_user
/tmp/ipfilter_user_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter_user 10[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_pptp_server_route
/tmp/route_pptp_server_del.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_pptp_server_route 9[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_pptp_server
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_pptp_server 60[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter_pptp
/tmp/ipfilter_pptp_client_delete.sh: No such file or directory
/tmp/ipfilter_pptp_server_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter_pptp 19[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter
/tmp/ipfilter_chain_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter 28[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_routectl
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_routectl 48[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_lltd
killall: lld2d: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_lltd 30[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_upnp
killall: upnpd: no process killed
killall: wanstate_check: no process killed
iptables v1.3.5: Couldn't find target `UPNP-PREROUTING-CHAIN'

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_upnp 635[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wsc
killall: wsccmd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wsc 81[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_movie_engine
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_movie_engine 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ntpclient
killall: ntpclient: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ntpclient 51[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wan_qos
RTNETLINK answers: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wan_qos 76[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ifilter
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ifilter 69[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_end_signal
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_end_signal 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_post
route: SIOC[ADD|DEL]RT: No such process
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_post 86[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_dhcpcd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_dhcpcd 17[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_dhcpcd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_dhcpcd 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module id
MidLayerModDep.c(995) stopModules :INFO:Stopped module id 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_aoss_mssid
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_aoss_mssid 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_nas
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_nas 4[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ap_serv
killall: ap_servd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ap_serv 31[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless_post
VAP-IF UP COUNT = 0
ath_netdev_stop: The stopping of the running
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless_post 232[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_udhcpd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_udhcpd 524[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_lanif
SIOCSIFFLAGS: Cannot assign requested address
MidLayer.c(2698) ML_DoCommandWithCmdMax :ERROR:find |
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
mcsnoop: flush all snoop entry
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_lanif 179[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_httpd
MidLayerModDep.cag7100_ring_free Freeing at 0x834dc800
ag7100_ring_free Freeing at 0x8373e000
(995) stopModules :INFO:Stopped module rc_httpd 2029[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wiredlan
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wiredlan 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless11bg_mac_limit
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless11bg_mac_limit 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless11bg
Invalid command : set_ledcustom
Invalid command : set_swapled
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless11bg 30[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless_pre
rcUtil.c(2909) Wireless_Rmmod :ERR:####### Wireless_Rmmod #########
VAP-IF UP COUNT = 0
VAP-IF UP COUNT = 0
VAP-IF UP COUNT = 0
VAP-IF UP COUNT = 0
rcUtil.c(2941) Wireless_Rmmod :####:rmmod ath_ahb : SUCCESS
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless_pre 1208[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_check
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_check 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_0
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_0 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_1
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_1 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_2
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_2 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_3
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_3 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_4
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_4 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_dummy
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_dummy 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect 3[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_manual
Cannot assign requested address
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_manual 1052[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_check
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_check 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_0
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_0 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_1
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_1 0[msec]
MidLayerModDep.c(984) stopMoag7100_ring_free Freeing at 0x834dc400
ag7100_ring_free Freeing at 0x83240000
dules :INFO:Stopping module rc_wanctl_pppoecd_2
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_2 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_3
MidLayerModDeag7100_ring_alloc Allocated 640 at 0x834dc400
p.c(995) stopModag7100_ring_alloc Allocated 4032 at 0x83240000
ules :INFO:Stopped module rc_wanctl_pppoecd_3 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_4
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_4 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pre
AG7100: cfg1 0x2f cfg2 0x7014
rtl8366sr_phy_setup ethUnit=1
Writing 6
MidLayerModDep.cag7100_ring_free Freeing at 0x834dc400
ag7100_ring_free Freeing at 0x83240000
(995) stopModules :INFO:Stopped module rc_wanctl_pre 279[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanif
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanif 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_router_behavior
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_router_behavRestarting system.
ior 0[msec]
Mid.
^

did it work?

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri Feb 19, 2010 9:14    Post subject: Reply with quote
please try this file again
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri Feb 19, 2010 9:54    Post subject: Reply with quote
and if this wont work. use this here. please test both
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
psyphah
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 27

PostPosted: Fri Feb 19, 2010 12:35    Post subject: Reply with quote
BrainSlayer wrote:
please try this file again


That one did not work - log:
Quote:
# AR_CR=0x00000024
AR_DIAG_SW=0x40000020
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gatedesc.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = ligd.gif
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = L3FwdSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateicfgSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateconnSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateinfoSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = messages
ip_nat_pptp version 3.0 unloaded
ip_conntrack_pptp version 3.1 unloaded
cgi.c(3434) UploadCgi Mad:MEMORY CHECK...
MidLayer.c(1914) ML_CheckMemory :X:MemFree = 38124
MidLayer.c(1918) ML_CheckMemory :X:Buffers = 3044
MidLayer.c(1922) ML_CheckMemory :X:Cached = 10844
MidLayer.c(1926) ML_CheckMemory :X:Active = 8500
MidLayer.c(1930) ML_CheckMemory :X:Inactive = 6376
cgi.c(3857) UploadCgi :DEBUG:### CFH->mark=bgn ###
cgi.c(3873) UploadCgi :DEBUG:### FH_Size=185 ###
cgi.c(3874) UploadCgi :DEBUG:### key=Buffalo keylen=7 ###
cgi.c(3879) UploadCgi :DEBUG:### DeCrypt failed. ###
cgi.c(3885) UploadCgi :DEBUG:### FirmwareImageOfset =208 ###
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_klogd
killall: klogd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_klogd 26[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_nastorage
cannot open connection to btpd in //.btpd (No such file or directory).
killall: twonkymedia: no process killed
killall: twonkymediaserver: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_nastorage 206[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_user_passwd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_user_passwd 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_usbmod
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_usbmod 142[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_dnrd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_dnrd 21[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoeroute
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoeroute 52[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_netwatchd
killall: netwatchd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_netwatchd 26[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter_simple
/tmp/ipfilter_simple_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter_simple 16[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_nat
/tmp/nat_rule_delete.sh: No such file or directory
/tmp/nat_group_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_nat 59[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter_user
/tmp/ipfilter_user_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter_user 9[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_pptp_server_route
/tmp/route_pptp_server_del.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_pptp_server_route 9[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_pptp_server
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_pptp_server 66[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter_pptp
/tmp/ipfilter_pptp_client_delete.sh: No such file or directory
/tmp/ipfilter_pptp_server_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter_pptp 19[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ipfilter
/tmp/ipfilter_chain_delete.sh: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ipfilter 28[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_routectl
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_routectl 48[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_lltd
killall: lld2d: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_lltd 27[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_upnp
killall: upnpd: no process killed
killall: wanstate_check: no process killed
iptables v1.3.5: Couldn't find target `UPNP-PREROUTING-CHAIN'

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_upnp 629[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wsc
killall: wsccmd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wsc 82[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_movie_engine
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_movie_engine 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ntpclient
iptables: No chain/target/match by that name
killall: ntpclient: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ntpclient 57[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wan_qos
RTNETLINK answers: No such file or directory
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wan_qos 74[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ifilter
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ifilter 74[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_end_signal
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_end_signal 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_post
route: SIOC[ADD|DEL]RT: No such process
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_post 86[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_dhcpcd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_dhcpcd 17[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_dhcpcd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_dhcpcd 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module id
MidLayerModDep.c(995) stopModules :INFO:Stopped module id 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_aoss_mssid
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_aoss_mssid 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_nas
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_nas 4[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_ap_serv
killall: ap_servd: no process killed
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_ap_serv 31[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless_post
ath_netdev_stop: The stopping of the running
AR_CR=0x00000024
AR_DIAG_SW=0x40000020
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless_post 229[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_udhcpd
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_udhcpd 524[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_lanif
SIOCSIFFLAGS: Cannot assign requested address
MidLayer.c(2698) ML_DoCommandWithCmdMax :ERROR:find |
debug : Enter [BRCTL_ADD_IF]
debug : Enter [BRCTL_ADD_IF]
mcsnoop: flush all snoop entry
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_lanif 178[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_httpd
MidLayerModDep.cag7100_ring_free Freeing at 0x8310ac00
ag7100_ring_free Freeing at 0x8310c000
(995) stopModules :INFO:Stopped module rc_httpd 2027[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wiredlan
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wiredlan 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless11bg_mac_limit
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless11bg_mac_limit 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless11bg
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless11bg 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wireless_pre
rcUtil.c(2779) Wireless_Rmmod :ERR:####### Wireless_Rmmod #########
rcUtil.c(2808) Wireless_Rmmod :####:rmmod ath_ahb : SUCCESS
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wireless_pre 1204[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_check
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_check 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_0
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_0 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_1
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_1 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_2
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_2 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_3
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_3 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_pppoecd_4
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_pppoecd_4 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect_dummy
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect_dummy 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_auto_detect
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_auto_detect 3[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_manual
Cannot assign requested address
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_manual 1052[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_check
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_check 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_0
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_0 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_1
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_1 0[msec]
MidLayerModDep.c(984) stopMoag7100_ring_free Freeing at 0x8310a400
ag7100_ring_free Freeing at 0x831d0000
dules :INFO:Stopping module rc_wanctl_pppoecd_2
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_2 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_3
MidLayerModDeag7100_ring_alloc Allocated 640 at 0x8310a400
p.c(995) stopModag7100_ring_alloc Allocated 4032 at 0x831d0000
ules :INFO:Stopped module rc_wanctl_pppoecd_3 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pppoecd_4
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanctl_pppoecd_4 0[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanctl_pre
AG7100: cfg1 0x2f cfg2 0x7014
rtl8366sr_phy_setup ethUnit=1
Writing 6
MidLayerModDep.cag7100_ring_free Freeing at 0x8310a400
ag7100_ring_free Freeing at 0x831d0000
(995) stopModules :INFO:Stopped module rc_wanctl_pre 278[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_wanif
MidLayerModDep.c(995) stopModules :INFO:Stopped module rc_wanif 1[msec]
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_router_behavior
MidLayerModDep.c(995) stopModules :INFO:Stopped moduleRestarting system.
rc_router_behav.


BUFFALO U-BOOT Ver 1.02


Now trying the other...
psyphah
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 27

PostPosted: Fri Feb 19, 2010 12:58    Post subject: Reply with quote
BrainSlayer wrote:
and if this wont work. use this here. please test both


OK. Your version "wzrg300nh-firmware_JP.bin" was accepted by the web firmware upgrade page.

Here's the relevant serial console log which shows this:
Quote:
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gatedesc.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = ligd.gif
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = L3FwdSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateicfgSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateconnSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = gateinfoSCPD.xml
MidLayer.c(544) ML_RemoveFileInDirectory :DEBUG:ent->d_name = messages
ip_nat_pptp version 3.0 unloaded
ip_conntrack_pptp version 3.1 unloaded
cgi.c(3434) UploadCgi Mad:MEMORY CHECK...
MidLayer.c(1914) ML_CheckMemory :X:MemFree = 38124
MidLayer.c(1918) ML_CheckMemory :X:Buffers = 3044
MidLayer.c(1922) ML_CheckMemory :X:Cached = 10844
MidLayer.c(1926) ML_CheckMemory :X:Active = 8492
MidLayer.c(1930) ML_CheckMemory :X:Inactive = 6384
cgi.c(3857) UploadCgi :DEBUG:### CFH->mark=WZR-HP-G300NH ###
cgi.c(3888) UploadCgi :DEBUG:### NON-CRYPT ###
cgi.c(3899) UploadCgi :DEBUG:CRC OK !UploadCgi(3899)
cgi.c(2664) Check_TagVersion :INFO :pTarget = WZR-HP-G300NH : a_pProduct = WZR-HP-G300NH
cgi.c(2569) check_specification :DEBUG:U-bootSpecification = M_00000001(JP)
cgi.c(2572) check_specification :DEBUG:NewFirmSpecification = M_00000001
MidLayerModDep.c(984) stopModules :INFO:Stopping module rc_klogd
killall: klogd: no process killed


But the web page status changed to (translated version):
Quote:
Data is not updated firmware to 1.65 from previous versions.
Please use the data firmware 1.65 or later.
Reboot.


Which says to me it won't update to that firmware version because it's an earlier version than the current one. The current version I have on this according to the status page is: WZR-HP-G300NH Ver.1.65 (R1.66/B1.02)

At least it accepted this version.

I have an idea that I'm going to try out now. I'll come back with the results if it works.

Regards.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri Feb 19, 2010 13:58    Post subject: Reply with quote
try this one. (v1.80)
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
psyphah
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 27

PostPosted: Fri Feb 19, 2010 14:13    Post subject: Reply with quote
You're going to hate me for saying this.

I got into u-boot command prompt by ctrl-c when it's trying tftp.

I then set the region variable to "US" (it was set to "JP").

I then rebooted the unit, and tried updating using the US firmware. IT SEEMED TO WORK!!

BUT

After the 6 minute wait and a reboot, it booted into Linux (using the new firmware!) - BUT - blank web pages - oh noes.

So the unit is semi-bricked in that it now boots using the US firmware but no web pages appear.

What I'm doing now is playing around using u-boot's tftpboot command - but if I can get the thing to run the web server/pages properly again this would be great. I'll get back - perhaps yaiba can try your latest image?

Regards.
danne99se
DD-WRT Novice


Joined: 14 Feb 2010
Posts: 28
Location: Tokyo

PostPosted: Fri Feb 19, 2010 14:38    Post subject: Reply with quote
BrainSlayer wrote:
try this one. (v1.80)


I tried it from web gui and it worked. I just logged into DD-WRT and so far its ok. Very Happy Thank you so much!!

Anything that you want me to check?

I dont have serial cable yet so I can not give you any logs, planning to go and get one tomorrow morning.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Fri Feb 19, 2010 19:27    Post subject: Reply with quote
if it works. perfect. thats all i need to know for now. now i can work on a backflashing way.
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
psyphah
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 27

PostPosted: Sat Feb 20, 2010 5:13    Post subject: Reply with quote
Just to let you all know - I have dd-wrt running on my JP model WZR now Cool

I did it via serial console,the u-boot command prompt, and a bit of voodoo magic. ;)

I can write it up fully here, but I feel that it's a bit redundant if there's going to be a web-upgradeable image provided in the near future.

Plus the only reason I had to do it my way was because I had semi-bricked the WZR and the web pages weren't working any more ;)

I'm going to put this procedure up on my personal blog, so if you really want to see how I did it, just say so here and I'll either paste a URL or paste it as a post here.

I'm going to play around between dd-wrt and openWRT for a bit so the writeup may take a few days to appear.

Regards.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Sat Feb 20, 2010 10:01    Post subject: Reply with quote
this binary here should work on any router in any country
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Sat Feb 20, 2010 10:02    Post subject: Reply with quote
and in case you want to revert. flash this binary from dd-wrt webgui
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
danne99se
DD-WRT Novice


Joined: 14 Feb 2010
Posts: 28
Location: Tokyo

PostPosted: Sat Feb 20, 2010 10:59    Post subject: Reply with quote
BrainSlayer wrote:
and in case you want to revert. flash this binary from dd-wrt webgui


Will this bring back the Buffalo firmware?

Can it be used in DD-WRT on both Japanese and non-Japanese hardware?

My initial problem was that I could not use the Web GUI that was in Japanese only. But now I think you have made it possible to get original firmware in English with JP hardware. First use Multi firmware posted above to DD-WRT and then use the "Original" firmware. But I dont think I will do it because Im really starting to like DD-WRT! Very Happy

If I load the "orignal" firmware. Can I then load a real orignal firmware from Buffalo on top of it?

Thanks!
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Sat Feb 20, 2010 11:28    Post subject: Reply with quote
yes this is the buffalo european firmware. i can provide the japanese too if wanted. the only main problem is that buffalo still checks the country code if you do further upgrades. so you can only flash the japanese firmware even if the european is installed then. to change the country flashing restriction you must change the uboot environment variable for the country code. the dd-wrt webflash image contains flags for all countries. so it should work on all devices. but i have not tested it on all devices for sure. i just tested it on a european device and the rest is done as guess. so i still need test results from people with installed japanese firmwares on japanese routers.
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Goto page Previous  1, 2, 3, 4 ... 10, 11, 12  Next Display posts from previous:    Page 3 of 12
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum