Unrecognized Ethernet-Card Listings (PCI/PCIe/Onboard)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9  Next
Author Message
NeutralGold
DD-WRT Novice


Joined: 16 Oct 2009
Posts: 2

PostPosted: Fri Oct 16, 2009 7:12    Post subject: Reply with quote
Was wondering if this unrecognized card could be added, thanks..


00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 20)
Flags: bus master, medium devsel, latency 64
Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0

00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (pro
g-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B
step)
Flags: bus master, fast devsel, latency 128
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size
=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size
=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
I/O ports at ffa0 [size=16]

00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
Flags: bus master, medium devsel, latency 0

00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Et
hernet (rev 81)
Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapt
er
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at de00 [size=256]
Memory at f3ffd000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f3fc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2

00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev
07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at f3ffe000 (32-bit, non-prefetchable) [size=4K]

00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev
07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] Onboard USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at f3fff000 (32-bit, non-prefetchable) [size=4K]

00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (
AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: efe00000-efefffff
Prefetchable memory behind bridge: dfc00000-efcfffff

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Allied Telesyn International AT-2400
Flags: medium devsel, IRQ 9
I/O ports at dd80 [size=32]

00:0b.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adap
ter (rev 11)

Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at da00 [size=256]
Memory at f3ffcc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at f3fa0000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2

00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d800 [size=256]

00:0f.1 Communication controller: C-Media Electronics Inc CM8738 (rev 20)
Subsystem: C-Media Electronics Inc CM8738
Flags: medium devsel, IRQ 11
I/O ports at dc80 [size=64]
Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/
AGP VGA Display Adapter (rev 20) (prog-if 00 [VGA controller])
Subsystem: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display
Adapter
Flags: 66Mhz, medium devsel
BIST result: 00
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Memory at efee0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at cc80 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 1
Capabilities: [50] AGP version 2.0
Sponsor
jacen
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 10

PostPosted: Wed Jan 06, 2010 9:50    Post subject: Reply with quote
Hi Guys, I am brand new to this dd-wrt stuff, but I think this is the right place for my question.

I am trying to get dd-wrt running on an Advantech SOM-6761 board. The board is using intel Atom N2701 processor, 945GSE chipset.

There are two integrated ethernet adaptors, one gigabit and one 100Mb. lspci only shows one though, and it is "unknown".

Code:

root@DD-WRT:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
[b]02:00.0 Ethernet controller: Intel Corporation: Unknown device 10d3[/b]


I have tried loading the e1000 module, but that didnt seem to help.
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Fri Feb 05, 2010 3:48    Post subject: How to lspci? Reply with quote
I've got a couple of nics that arent recognized, but how do I do the lspci and post the info when the card won't connect?

I've got an Asus M3N78-VM with onboard nForce 10/100/1000 connected to the wrt600n w/ DD-WRT v24-sp2 mega 13064 that is not recognized. From another network computer I did a lspci -n -v, but there's nothing that even resembles the expected nVidia nForce device.

I've also got a NetGear card, but one at a time.

Any advice?
Borage
DD-WRT User


Joined: 26 Nov 2006
Posts: 420

PostPosted: Fri Feb 05, 2010 6:29    Post subject: Reply with quote
The driver for Nvidia nForce is forcedeth.ko. I have this driver in DD-WRT v24-sp2 (02/03/10) std - build 13832.

Upgrade to the same release I have and see if it works.
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Fri Feb 05, 2010 14:41    Post subject: Reply with quote
I ran the lspci again, this time from the computer not the router Confused and got these excerpts:

00:0a.0 200: 10de:0760 (rev a2)
Ethernet controller: nVidia Corportion MCP78S [GeForce 8200] Ethernet (rev a2)
Kernel in use: forcedeth

I also have this card in another machine:

00:0f.0 0200: 10ec:8169 (rev10)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Kernel in use: r8169

Thanks Borage. I checked the router database and 13064 is the latest recommended for the wrt600. Where did you find 13832 and what router is it for?
Borage
DD-WRT User


Joined: 26 Nov 2006
Posts: 420

PostPosted: Sat Feb 06, 2010 9:27    Post subject: Reply with quote
I used the X86 version of DD-WRT. You can get build 13832 for wrt600n in the broadcom directory.


DD-WRT v24-sp2 (02/03/10) std - build 13832
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Sun Feb 07, 2010 18:11    Post subject: Reply with quote
I reflashed to DD-WRT v24-sp2 (02/03/10) mega (SVN revision 13832) and the RTL-8169 Gigabit Ethernet will connect now, but only at 100. No help at all on the nVidia Corportion MCP78S [GeForce 8200] Ethernet.

Is there anyway I can install drivers?
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Tue Feb 09, 2010 5:58    Post subject: Reply with quote
Thanks Borage for your help. I'm still unable to connect to the box with the nForce onboard nic though. Any advice, even recommendations for a compatable gigabit card would be appreciated.
Borage
DD-WRT User


Joined: 26 Nov 2006
Posts: 420

PostPosted: Tue Feb 09, 2010 6:51    Post subject: Reply with quote
I have one Nvidia nForce NIC in my test router, but this adapter is only 100 Mbps. The only Nvidia nForce Gigabit card I have is in the workstation I use right now.

The only Gigabit card I can recommend right now is Realtek RT8169 based cards. The card is widely used and it supports MTU up to 9500. Users will be able to utilize additional bytes for VLAN and MPLS tags, or simple increase of interface MTU to get rid of the some unnecessary fragmentation.
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Wed Feb 10, 2010 3:25    Post subject: Reply with quote
Its weird, the onboard nVidia MCP78S Gigabit Ethernet doesn't connect at all. I get the network cable is disconnected notice when I connect it to the router, but when I connect it directly to my dsl modem it connects fine at 100. Your nForce is fine?... maybe my router's got hardware problems?

My RTL-8169 that is only connecting at 100 should be working fine at 1000 from the sounds of it. Is there anything I should have to set up? I had an ECS NForce6M that had an onboard gigabit nic that worked out of the box.

I appreciate the help.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17417
Location: Hesse/Germany

PostPosted: Wed Feb 10, 2010 8:28    Post subject: Reply with quote
upgrade bios
_________________
GEGEN die EEG-UMLAGE auf EIGENVERBRAUCH!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Thu Feb 11, 2010 3:24    Post subject: Reply with quote
Ok, did that. Most recent mobo bios flashed but same results connecting to the wrt600. The onboard nForce acts like there's no cable, no lights. The NetGear GA311/RTL8169 connected once at 100, but the next time showed limited or no connectivity. I've tried different ports on the router and different cables.

Both cards seem to work at 100 with my modem.
lastnerve
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 7

PostPosted: Thu Feb 11, 2010 16:39    Post subject: Reply with quote
Is there any way to get more information from the router about why the connections aren't being made, check the status of the drivers that are loaded, diag them, etc? Thanks for your help Sash, Borage.
jacen
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 10

PostPosted: Wed Mar 03, 2010 10:44    Post subject: Reply with quote
I am posting here under recommendation from Sash regarding this thread.

I have a Advantech SOM-DB5700 development board, running 02-23-10-r13972. I cannot find any newer bios for the board, so I believe it is running the latest.

lspci shows:
Code:

02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection


dmesg | grep e100 shows:
Code:

e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation


The device does not come up in ifconfig.

The following commands do get it to come up though

Code:

rmmod e100
insmod e1000e
rc restart


Can it be added so that it comes up by default?
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6077
Location: Dresden, Germany

PostPosted: Thu Mar 04, 2010 15:13    Post subject: Reply with quote
done. should work now. next time please show the full lspci output
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

DD-WRT supported Concerts @ Bunker Dresden
03.10.2014 - Front 242 / Haujobb / Planet Myer Day
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9  Next Display posts from previous:    Page 6 of 9
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum