Bekomme keine Verbindung (LAN/WLAN) zum Fonera 2100

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC basierende Hardware
View previous topic :: View next topic  
Author Message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Fri May 07, 2010 15:02    Post subject: Bekomme keine Verbindung (LAN/WLAN) zum Fonera 2100 Reply with quote
Hallo,

ich hab meinen Fonera 2100 nochmal ausgegraben.
Dann wollte ich zu diesem verbinden...vergebens.

Schlussendlich hab ich dann per serieller Verbindung linux.bin neu aufgespielt.

Trotzdem bekomme ich immer noch keine Verbindung zum Router hin.
Fonera FAQs hab ich schon gelsen, dies haben mich jedoch noch nicht weitergebracht.

Alles LEDs leuchten und im Hyperterminal bekomme ich folgenedes angezeigt:

Code:
+PHY ID is 0022:5521
Ethernet eth0: MAC address 00:18:84:14:41:44
IP: 192.168.1.254/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.0 - built 16:57:58, Aug  7 2006

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap51
RAM: 0x80000000-0x81000000, [0x80040450-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 10.000 seconds - enter ^C to abort
RedBoot> fis load -l linux
Image loaded from 0x80041000-0x802d760c
RedBoot> exec
Now booting linux kernel:
 Base address 0x80030000 Entry 0x80041000
 Cmdline :
øôx옐”ôôìï”


Ich hoffe ihr habt eine Idee was ich noch anstellen kann umd das Ding zum Laufen zu bekommen.
Back to top View user's profile Send private message
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Fri May 07, 2010 19:49    Post subject: Reply with quote
ja dann stell mal die console auf 115200kbaud auch schau was passiert
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Sat May 08, 2010 8:53    Post subject: Reply with quote
Ich habe gestern auch noch ein bischen rumprobiert und habe den Fonera an die Fritzbox ageschlossen.
Auch hab ich dem Fonera eine IP aus dem bereich der Fritzbox gegeben sowie die Fritzbox als Server und Gateway eingestellt.
Hilft aber auch nichts.

Bei 115200kbaud spuck es ganz schön viel aus.

Code:
Linux version 2.6.24.111 (root@dd-wrt) (gcc version 4.1.1) #22645 Sat Oct 10 02:
02:57 CEST 2009
mips devid = 86
CPU revision is: 00019064
mem setup
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
Built 1 zonelists in Zone order.  Total pages: 4064
Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd

Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 92.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 12936k/16384k available (2222k kernel code, 3448k reserved, 301k data, 1
24k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
scanning for board data at A87FF000 (FFFFFFFF)
scanning for board data at A87FE000 (FFFFFFFF)
scanning for board data at A87FD000 (FFFFFFFF)
scanning for board data at A87FC000 (FFFFFFFF)
scanning for board data at A87FB000 (FFFFFFFF)
scanning for board data at A87FA000 (FFFFFFFF)
scanning for board data at A87F9000 (FFFFFFFF)
scanning for board data at A87F8000 (FFFFFFFF)
scanning for board data at A87F7000 (FFFFFFFF)
scanning for board data at A87F6000 (FFFFFFFF)
scanning for board data at A87F5000 (FFFFFFFF)
scanning for board data at A87F4000 (FFFFFFFF)
scanning for board data at A87F3000 (FFFFFFFF)
scanning for board data at A87F2000 (FFFFFFFF)
scanning for board data at A87F1000 (FFFFFFFF)
scanning for board data at A87F0000 (35333131)
found 1
Found board config at 0xa87f0000
Radio config found at offset 0xf8(0x1f8) (a87f00f8)
Generic PHY: Registered new driver
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
gpio_proc: module loaded and /proc/gpio/ created
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A
serial8250 serial8250.0: unable to register port at index 0 (IO3f8 MEM0 IRQ4): -
28
serial8250 serial8250.0: unable to register port at index 1 (IO2f8 MEM0 IRQ3): -
28
serial8250 serial8250.0: unable to register port at index 2 (IO3e8 MEM0 IRQ4): -
28
serial8250 serial8250.0: unable to register port at index 3 (IO2e8 MEM0 IRQ3): -
28
Infineon ADM6996: Registered new driver
Marvell 88E6060/88E6061: Registered new driver
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
scanning for root partition

found squashfs at 100000
found RedBoot partition at [0xA8000000]
found linux partition at [0xA8030000]
Creating 8 MTD partitions on "spiflash":
0x00000000-0x00030000 : "RedBoot"
0x00030000-0x007d0000 : "linux"
0x00100000-0x006a0000 : "rootfs"
0x006a0000-0x007d0000 : "ddwrt"
0x007d0000-0x007e0000 : "nvram"
0x007e0000-0x007f0000 : "FIS directory"
0x007f0000-0x00800000 : "board_config"
0x00000000-0x00800000 : "fullflash"
watchdog hb: 60  ISR: 0x20  IMR: 0x8  WD : 0x9591f8cd  WDC: 0x0
ar2315_wdt_init using heartbeat 60 s cycles 2400000000
watchdog hb: 60  ISR: 0x20  IMR: 0x88  WD : 0x8f07e657  WDC: 0x0
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length    128 bytes
PF_RING: ring slots       4096
PF_RING: sample rate      1 [1=no sampling]
PF_RING: capture TX       No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
decode 1f02
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 124k freed
starting Architecture code for fonera
sh: ead: not found
sh: can't create /proc/sys/dev/wifi0/maxvaps: Permission denied
ath0
sh: can't create /proc/sys/dev/wifi0/csma: nonexistent directory
Reserved instruction in kernel code[#1]:
Cpu 0
$ 0   : 00000000 fffffffb 00000007 00000020
$ 4   : 00000348 00890b05 802e6528 80d47f1a
$ 8   : 00000008 00000387 bab44500 00000003
$12   : 0000000f 80d451da 00000001 0497d820
$16   : 00000007 000155bb 00000001 00000800
$20   : 00ffffff 802e5a30 00000010 00000000
$24   : 00000003 802e650c
$28   : 80bc6000 80bc7a20 0000000a 80108804
Hi    : 00000000
Lo    : 00890b05
epc   : 8010f6f4     Tainted: P
ra    : 80108804 Status: 10009c03    KERNEL EXL IE
Cause : 30800028
PrId  : 00019064
Modules linked in: ath_ahb ath_hal(P) ar2313
Process startservices (pid: 835, threadinfo=80bc6000, task=8038e898)
Stack : 0000042c 00000020 00000000 00000003 00003b34 0000003c 000003ad 00000000
        80a4fc80 00000400 00000020 80d27c00 00000020 80d40000 80a4fc00 801083f8
        2405e198 10400009 00000002 83a40018 00000002 80d40004 00007f16 80d80000
        00020000 80bc7a94 65627365 00000000 00000634 00000000 00007f1a 4204ffbe
        00000001 64646f67 80ce0680 00000000 80d27c00 80ce0680 80d27cf8 00185493
        ...
Call Trace:[<801083f8>][<80108d28>][<8010d000>][<8009726c>][<800a5074>][<80093b1
0>][<8004f43c>][<8004f40c>][<8009726c>][<8009a468>][<8009aa80>][<800914ac>][<800
8f880>][<80093798>][<8006d260>][<8008f880>][<800b4320>][<802bb1e0>][<8008186c>][
<800a9928>][<800975ac>][<8006d040>][<802bb1e0>][<802bb1e0>][<802bb214>][<800b4cd
0>][<800b9a48>][<800bb764>][<800bec54>][<80048660>][<8004d230>][<8004d230>]

Code: 01205021  0804399c  24170001 <08043bec> 02c21021  08043d0b  24170001  0804
3ad2  24170001
VM: killing process startservices
ifconfig: SIOCSIFADDR: No such device
No such device
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Thu May 13, 2010 22:37    Post subject: Reply with quote
Hab es grad nochmal mit 115200kbaud probiert und folgendes erhalten.

Code:

Àmem setup
scanning for root partition

found RedBoot partition at [0xA8000000]
found linux partition at [0xA8030000]
decode 1f02
start service
starting Architecture code for fonera
load ATH 802.11 a/b/g Driver
sh: ead: not found
sh: can't create /proc/sys/dev/wifi0/maxvaps: Permission denied
ath0
sh: can't create /proc/sys/dev/wifi0/csma: nonexistent directory
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Fri May 14, 2010 7:21    Post subject: Reply with quote
installier die neueste beta
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Fri May 14, 2010 8:11    Post subject: Reply with quote
Das hab ich bereits getan.
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Mon May 17, 2010 8:35    Post subject: Reply with quote
dann sollte es ja gehn....
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Mon May 17, 2010 11:05    Post subject: Reply with quote
Sollte...tuts aber nicht.
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Mon May 17, 2010 13:37    Post subject: Reply with quote
Wenn ich die serielle Verbindung hergestellt hab und zum Router verbunden bin kann ich den Router auch über die IP anpingen.
Trenne ich die serielle Verbindung geht wieder nichts mehr.
Jedoch bringt mir das anpingen auch nichts da ich nichts weiter machen kann über den Browser komm ich jedenfalls nicht auf den Router drauf.
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Mon May 17, 2010 17:11    Post subject: Reply with quote
dann hast du wohl n anderes problem weil der fon ja offensichtlich funtioniert.
reset to defaults.
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Mon May 17, 2010 20:18    Post subject: Reply with quote
Sash wrote:
reset to defaults.


Über drücken des tollen reset Taster?
Scheinbar wikungslos.
Was kann ich denn noch probieren?
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Tue May 18, 2010 10:18    Post subject: Reply with quote
Code:
mtd erase nvram

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Wed May 19, 2010 11:39    Post subject: Reply with quote
Hab nun über redboot nochmals fis init -f ausgeführt und die neuste Beta drauf gemacht.
Leider ohne Erfolg.
Scheinbar hab ich ein größeres Problem als ich angenommen hatte.
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Wed May 19, 2010 13:02    Post subject: Reply with quote
geht wlan?
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
maeuchler
DD-WRT Novice


Joined: 14 Apr 2007
Posts: 20
PostPosted: Wed May 19, 2010 16:55    Post subject: Reply with quote
Nun ich hätte vielleicht anfangs sagen sollen das ich den tollen bzw. nicht so tollen Low Power Mod ( http://wiki.freifunk-hannover.de/Fonera_Low_Power_Mod )
nutze.
Nachdem ich dann das normale Netzteil angeschlossen hab, konnte ich auch über WLAN auf den Router zugreifen.
Ich dachte mit diesem mod die Wärme entwicklung etwas einzuschränken, das hat auch funktioniert, nur der Rest dann nicht mehr Sad
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum